My samsung syncmaster 732NW moniter doesn't gives the display. the ligth in the power button at right bottom corner only blinks, please help me!!

k open it from the top side

Sound like there is no communication with video card.

replace bad capacitor on power board (like 820/25v or 1000/2v)

this problem can occur cause of two cases 1 problem with LCD panel (replacement can solve) 2 power failure in side moniter (repairing moniter can solve)
thanx PLZ vote

that will be capacitors problem in power board in the moniter

When you have strange functioning going on, first place to check will be the power supply.

http://s807.photobucket.com/albums/yy352/budm/Samsung%20730B/

Please post back what you find.

http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

U NEEDS TO INSTALL MONITOR CD COMES ALONG WITH MONITOR. THEN IT SHOWS SYNC MASTER. AND THE COLOR SETTINGS WILL BE ALIGNED AUTOMATICALLY.

1. cpu problem. why because of there is no signal output from cpu to monitor. the led blinking means there is no vertical, horizontal signals from cpu to monitor.

2. your monitor connected to another system.

3. neck board dry points.

4. cheak the display cable. 13&14 pins are horizontal, vertical signals.1, 2, 3 pins , R G B , 6 ,7, 8 pins R G B ground ( coaxiler cable used , meshed wire is ground )

Monitor Help CH000315, Black borders on side of screen. CH000316, Dead or black pixels. CH000403, Macintosh and/or PC monitor compatibility.
Black borders on side of screen. Additional information about what causes black borders on computer displays.

Good Luck, Please dont for get to Vote/Thank You.

I WOULD REMOVE REAR PANEL AND LOOK FOR A MASTER RESET BUTTON OR A BLOWN FUSE ALSO CHCEK
YOU AC ADAPTOR TO SEE IF IT IS WORKING FIRST.