Outlook expess will not work

Hi, i have the same issue and it isnt the firewall. But here is how to disable it if it is. Go to the router websight at 192.168.0.1 (type this directly into the browser bar at the top of your page. The password is usually password in lowercase. The username is admin. This will get you into the management screen for the router config. Look on the Left and you will see firewall. Click on this then ensure that there are no restrictions for HP.

I still have the issue with the printer so good luck.......scotty

Is the internet working on the router? You will want to troubleshoot to isolate the problem. It is best anytime when setting up new internet to turn off all firewall when having issues. What type of internet do you have? Have you connected with a wired connection directly to the router to see if the internet works that way? also you will want to check the lights on the router and modem. Make sure they are lit correctly. Once I have more information I can assist you further.
Thank you,
Lee

You need to open the port that is setup on your Linksys router to your new router in order for your Outlook to work with that Dlink router...

Check with this tip
Let me know if everything is clear and if you can put every setting matching on both sides: Access Point (= router, AP) and Client (PC).
Radio connection IS different from browsing Net.
Can PC browse internet when connected with LAN cable to same router?
Are both on same subnet?
Have you checked if an access list is installed in router firewall?
Is the Client blocked /allowed in Firewall?
Can you ping router from Client?
Did you see the router as default gateway in Client IPCONFIG?
Is Router IP address in HOST client file?
Any antivirus, firewall (like Zonealarm) software blocking some new LAN connection and requiring to unblock?

ok, this is an easy fix, just go into device manager and unistall the wireless card, dissable AVG firewall and activate microsoft's firewall. Then Download CCleaner and clean the registry, you can download it from here:
http://www.filehippo.com/download_ccleaner/

when you have cleaned the registry restart the pc, it should now detect the wireless card and install the drivers for it, it will show this in the system tray (bottom righthand side where the time is)
This should resolve the problem for you
post back if you still have problems

regards and please remember to rate us

The Fixya Team

Close outlook

delete the follwing registry keys

Start > Run > Regedit
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins

HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins

Hi MistiShay,

You did mention that it was working fine for several weeks suddenly your wireless computers stopped functioning and your getting a message that the security key in incorrect. This only means that its either your entering the wrong encryption key or someone changed the previous security key to something else. By the way what type of wireless security did you configured on the router initially was it WEP or WPA, if its WEP(64 or 128 bit) and your using a bulit-in wireless adapter on your laptop you need the default WEP key because the passphrase only works with a Netgear WLAN Utility.

Know if your having difficulties accessing the setup page of the router you may need to check on your browser settings, turn off the pop up blocker and firewall temporarily, also try another computer. Now if all fails you may need to press that reset button on your router and set it up again.

I

Please check with the firewall sitting of our os and router it may conflict disable the firewall sitting in windows from control panel

think this may help u

What happens if you connect one of the wireless machines with an ethernet cable? Any chance you have a Firewall of AV program blocking port 25 on these machines? Have you tried Safe Mode With Networking? I'm sure you realize that is most often caused by the ISP blocking Port 25, but I assume they would have told you so if this was the case.

Hi there,dkny, What kind of router are you using? That may be where the complaint is coming from. Perhaps there is a setting to allow programs and/or hardware(wirless card). Also does the wireless card come with a configuration utility? You may have to 'tell it' what you want to do. Hope it helps!