Question about Dishwashers

1 Answer

AEG 50760 Dishwasher shows Error Code 30

AEG 50760 shows Error Code 30 everytime it starts after about 10 seconds. Cannot clear error code. Have checked machine does not appear to be blocked. The user manual says "leak prevention system activated".

Please help.

Posted by on

  • 1 more comment 
  • mattmoss99 Feb 17, 2008

    Thanks. We tried this, tipping the machine forward to about 60 degrees and about a cup full of water came out. We put the machine back and after 3 days it is working fine.



    Thank you very much for your help.


    Matt

  • Anonymous Mar 17, 2014

    error code ,30

  • Anonymous Mar 20, 2014

    aeg favorit 60820 I have emptied water from washer by turning over and it worked a few times

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 54 Answers

There is water in the base of the macine. lean it over to the side to get all of the water out then try again.

Posted on Feb 14, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I correct error code 25 on an AEG OK-LAVAMAT 74640 update washing machine mean?


Family error code "E20" means difficulties in draining, but I never heard for error code E25 on this model. Could be : E21, E23 and E24 error code.

Dado

Aug 24, 2014 | AEG Washing Machines

1 Answer

AEG F65070VI fitted dishwasher error code 46 & 30


This error is flood alert because of a leak in the tub. IT might be a seal but you have to remove it and drain it and lay it down to see and then you need parts.

Jun 04, 2013 | AEG Dishwashers

1 Answer

Error H1 and H2


this error happen when the temperature increase 7c or more in 1 minutes o by 2c in 2 minutes
Turn OFF the machine for clear and turn ON again.
God bless you

Jul 18, 2012 | Washing Machines

1 Answer

Code 3452 and my touch screen is not working


These could be related problems, however I doubt that they are. The error code 3452 refers to thermistor not reaching temp within specified 30 second time frame. There is a sensor there that monitors this. Touch screen may not work due to error code. However, I'm a little suspect that it may be a different problem. But first, let's solve the initial issue and then move onto the screen.
Try clearing the error code first, and then if it appears again, you'll need to look at replacing either the sensor or thermistor. If you are not a certified technician, but attempting to resolve yourself, I would suggest sending the fuser back to whomever you purchased it from and telling them to supply you with another one. During rebuild they probably did not properly gauge the sensor from the fusing roller. therefore it is not able to properly monitor temperature. (very common problem)....
Here is the instructions for clearing the error code:

1. Turn OFF the Main Power Switch.

2. Turn Main Power Switch ON again while holding down the Utility/Counter key more than 10 seconds after. A screen will appear saying "TROUBLE RESET"

3. Touch "TROUBLE RESET".

4. Check to make sure that "OK" is displayed below which confirms it has been reset.

If "OK" is not there , it will show a different code....

IF it says "OK", you should be good to go. Error code should now be cleared.

5. Just Turn off the Main Power Switch wait at least 10 seconds....and turn it on. Make sure that the machine properly starts.


** If it re-displays the code again within a short period of time, replace the fuser unit. Or get a certified technician to replace the or adjust the sensor or Thermistor unit. However, since you just purchased this I will assume that it is either a defective unit from manufacturer, or the company who rebuilt it did not properly ensure it was working. Return it and demand a replacement in EITHER case!! J


Hope this helps

Sep 02, 2011 | Konica Minolta bizhub C450P Laser Printer

1 Answer

What is error code F2 on my AEG washing machine


I believe that this is a "Pump Blockage" error. You need to locate and clean out your empty pump filter (Probably behind a little door on the bottom of the machine. You may also need to check the empty pipe and the drain it goes into are also clear. 99% probability of a blocked filter

Jul 01, 2011 | AEG Washing Machines

1 Answer

Green light flashes, will not print. Checked all


Hi can gave you the truble codes
  • Light Orange - 2 beeps: Remove any paper jammed
  • Light Orange - 3 beeps: Remove any paper jammed
  • Light Orange - 4 beeps: Add Ink
  • Light Orange - 5 beeps: Re-install cartridge or replace it
  • Light Orange - 6 beeps: Re-install cartridge or replace it
  • Light Orange - 7 beeps: Re-install cartridge or replace it
  • Light Orange - 8 beeps: Waste is almost full
  • Flash 1 x Orange - 10 beeps (error code 6100): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 2 x Orange - 10 beeps (error code 6300): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 3 x Orange - 10 beeps (error code 6800): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 4 x Orange - 10 beeps (error code 5100): Make sure nothing is blocking the cartridge movement, if not requires service.
  • Flash 5 x Orange - 10 beeps (error code 5400): Try unplugging the printer for 30 seconds, if not requires service.
  • Flash 6 x Orange - 10 beeps (error code 5B00): Waste full (make a reset)
  • Flash 7 x Orange - 10 beeps (error code 5200): Replace the BJ Cartridge(Printhead)
  • Flash 8 x Orange - 10 beeps (error code 5200): Replace the BJ Cartridge(Printhead)
  • Flash 9 x Orange - 10 beeps (error code 5600): Replace the BJ Cartridge(Printhead) or reinstall it
  • Feb 01, 2010 | Canon BJC 4400 InkJet Printer

    1 Answer

    L S or L5 error code on Calypso top load washer (Color - grey)


    LS Lid Switch Error The control should flash this error code if it cannot detect the lid switch opening and closing properly. This error code may also be used if there is a disagreement between the motor and machine controllers on the stat if the lid switch. The control should not allow the unit to run in this condition.
    This code will also appear if the user presses the START key while the lid is open.
    Open the lid or press STOP/CANCEL to clear the display.

    Dec 06, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

    1 Answer

    Lavamat 86800 stop the washing cycle after few seconds without any error code


    Hi - did you ever find a solution to the problem? My 12 year machine now showing the same issue.

    Oct 11, 2008 | AEG L86800 Front Load Washer

    1 Answer

    Error code 30


    i fixed the problem by tipping the machine over slightly, as suggested by other members, about a pint of water came out the bottom and it now seems to work perfectly.

    Mar 27, 2008 | AEG 24 in. Favorit 60870M Free-standing...

    13 Answers

    Error code 4H on sharp ar 5316


    WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.

    Feb 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

    Not finding what you are looking for?
    Dishwashers Logo

    Related Topics:

    1,851 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dishwashers Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Marvin
    Marvin

    Level 3 Expert

    82322 Answers

    Brad Brown

    Level 3 Expert

    17473 Answers

    Are you a Dishwasher Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...