Question about Toshiba 57H81 57" Rear Projection Television

1 Answer

Torshiba 43vj22p 42inch rear projection

When watching tv im double vistion as everybody has 2 of themselfs is the converge

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 96 Answers

Ya, it just another convergence problem, open the back and find the two big black or grey ic's starting with the part # usely stk392 xxx, on this ship with the part # go on goolles and type the part #. Find there pin figuration and with the info check your voltages on the pin's for +/- VCC narmaly there around +/- 30 volts. If it is present, replace the ic's, if missing will have to fix the power supply first narmaly there is a fused link to that source, it would narmaly be a GMA4 or pico 4 amp. Look for it, Toshiba, there excelent product compare to tother brand I've worked with, at least they answer there tele when calling not like RCA and Sony or can't ask question to Panasonic, there just say oh call him. Meanwile, good luck, if you need more info contact me.

What About Bob.

Posted on Feb 14, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Toshiba 43VJ22P, the colours blue and red go in double vision, tried convergence didn't work. can you help please?

You will need to replace the Convergence ICs ,they are Big Black ICs and will have part number on them. Example STK392-110
Mats Electronics has Parts 1-800-628-1118

Jun 30, 2011 | Toshiba 43A10 43" Rear Projection...

1 Answer

Colors are separated, double vision in lower right corner.

Oh, yea - another misaligned projection TV. All rear projection TV's seem to eventually get this disease.
Fix: perform a "convergence," which will converge all 3 color projectors to the same point.
How-to video:
how-to instructions:

Dec 11, 2010 | Sony KP-53XBR200 53" Rear Projection...

1 Answer

My kp57w5500 has a double red image on everything i watch... seems like im looking at a 3-d tv only it is not lol. Is this a fixable problem or am i just better off buying a new tv?

Thats the classic sign of failed convergence. You can get the Sony type 1 convergence repair kit which fits your model from the kit contains the ICs, Pico fuses and etc. plus the cd with instructions for the repair.

Oct 22, 2010 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Toshiba Model 43VJ22P Shadows on the screen? Adrian

Ur convergence is dead.Must replaced these 2 convergence ICS and all it resistors.The shop will cost U $300 for parts and labors.

Feb 02, 2010 | Toshiba 42H81 42" Rear Projection...

1 Answer

I can't find the settings in my toshiba 43VJ22P menu to adjust my convergance, please help!

you need to press must on the remote and whilst holding mute, pess menu on the left hand side of the tv. that will let you in to service mode. im sure if you press 7 in service mode it will let you in to the convergence menu.

Dec 22, 2009 | Toshiba 43H70 43" Rear Projection...

1 Answer

Rca 52in rear projection hdtv red, blue, and green lines n double

tHIS is a convergence problem.. first question if you go into the customer setup menu. is the convergence option listed? If you have not got that option i suggest you read "the fl231 problem in the tips and trick section of this website. this can be a simple inexpensive repair..if you do have the convergence option then it can be one of three diffrent boards convergence power, convergence amp or small signal board. and will need further trouble shooting

Apr 04, 2009 | RCA Televison & Video

1 Answer

Double Display on screen

The convergence Ics need replacement along with the 2.2 ohm 2 watt resistors. There is a repair kit available for your model which contains both the ICs and all six of the resistors and contains step by step instructions with pictures. Heres the link to the repair kit.

Mar 06, 2009 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

Toshiba 43VJ22P


Aug 13, 2008 | Toshiba 57H81 57" Rear Projection...

1 Answer

Shadows on Rear Projection TV
Sony Convergence

Jan 25, 2008 | Televison & Video

Not finding what you are looking for?
Toshiba 57H81 57" Rear Projection Television Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides