At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Wiring a 6-wire D104 microphone to a Ranger 2985 DX requires connecting the wires in the correct order and configuration.
The Ranger 2985 DX has an 8-pin modular plug, and the D104 microphone has a 6-pin modular plug.
Here's one way to wire the D104 microphone to the Ranger 2985 DX:
Connect the red wire from the D104 to the 8-pin modular plug's pin 4 (PTT - Push-To-Talk).
Connect the black wire from the D104 to the 8-pin modular plug's pin 5 (Ground).
Connect the white wire from the D104 to the 8-pin modular plug's pin 6 (MIC + Audio).
Connect the blue wire from the D104 to the 8-pin modular plug's pin 7 (Receive Audio)
Connect the green wire from the D104 to the 8-pin modular plug pin 8 (Transmit Audio)
Connect the yellow wire from the D104 to the 8-pin modular plug's pin 3 (UP-Down).
It's important to double-check the wiring configuration with the user manual of the Ranger 2985 DX and the D104 microphone. Some manufacturers have different wiring configurations and it's important to match the wiring accordingly to avoid any damage to the device.
It's also worth noting that if you are not comfortable with the wiring process, it's best to consult with a professional technician or a radio expert.
Here are the pinouts for the 4 wire and 6 wire D104 mics. they were great microphones back in the 1980s. I used to have one on my Ten-Tac HF ham radio.
Astatic (4 wire) Astatic (6 wire) 1- Shield 1- Shield & Blue 2- White 2- White
3- Red 3- Red
4- Black 4- Black Yellow NC
ALL D104 microphones are high impedance devices. It is the mic stands that are different. The non-amplified stands are intended to work with tube radio equipment. The transistorized bases are intended to drive solid state transmitters, but will also drive tube equipment. The D104 microphone with the non-amplified base will work well with this radio as it has a very high impedance input.
This works for any mic. dont worry about color codes. look at the switches.. there will be a common on both poles of the d104.. those need to be tied together to grnd. pin 1 on mic . the others d104 on n/c side is your rx. pin 4... the n/o one will be your tx pin 3 the other n/o will be audio and will have a wire from the mic element also on that pole of the switch. pin 2..
Hello there Nice mic i have 3 of these here is infornation that you can use to get the diagram i like the first link a lot better though it is in full color Ok just look belowtis post and it will be there ok? I hope that this is very helpful for you Best regards Michael Repairing the D
These Astatic D-104 microphones are all vintage. ... Doing so will reveal the simple wiring and the wiring diagram, pasted to the plate on the inside. ...http://www.k3hkr.com/D104_repair.html - 4k - Similar pagesI am needing the wiring description for the astatic d104 - FixYa
Oct 24, 2009 ... HELLO THERE The silver eagle d104 is wired just the same as the knight ... astatic echomax 2000 unilli eagle wiring · wiring diagrams for ...http://www.fixya.com/support/t3271236-am_needing_wiring_desc... - 125k - Similar pages
×