Question about Projection Televisions

2 Answers

I lost my orignal remote for my sanyo tv. how do i change the imput sourse with out it?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Any universal remote control will have the setup codes for a Sanyo. You can get one at any electronics store or Target. I've even seen them at big drug stores for under $20

After you install the batteries, read the instructions for a 2 digit programming code that matches your TV (Sanyo is usually 00).

Then usually you press and hold the TV button on the remote while entering the code. If the code is accepted, something will usually flash or beep at you 4-5 times.

Posted on Feb 15, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

I am sorry but you cannot. maybe you can borrow one from a neighbor or a friend.

Posted on Feb 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost remote for sanyo ht30746 tv


You can buy an exact remote from a company called Remote control warehouse for 39.95----Google the model number and you will find them.

It is very common that "universal" remotes will do many functions but not ALL that the original remote did--considering this it may be a good idea to get an original remote---part number on this site is: 6450750977for the remote for this model Sanyo.

I hope this helps you and if you have any questions let me know.

SD TECH

Oct 04, 2009 | Projection Televisions

1 Answer

Need code for sanyo tv from innovage universal remote


http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

click there for the complete list. it indicates that the sanyo tv codes are 0154, 0159

May 07, 2009 | Projection Televisions

1 Answer

The original remote was destroyed to my Sansui Model dtv2798 and i just have a universal RCA remote, I also do not have an owners manual, how do I change from wide screen to full screem


You will need the orignal remote for this feature ( a universal will not work!) www.remotes.com may be able to sell you an orignal replacement for your TV
I hope this fixes you up!
Please rate my response!

Jan 17, 2009 | Projection Televisions

1 Answer

Looking to replace lost remote for Sanyo TV Model #DS20425 can you direct me for replacement


The Sanyo part number is: 6450656934
It used to cost about $25, but is no longer available from the distributor I use. Hopefully the part number will help. Realize that most universal remotes should work just fine. Just be sure to get one that has a menu button.

Dan

Jul 15, 2008 | Projection Televisions

1 Answer

I HAVE A DURABRAND TV MODEL #BH2004D. THE REMOTE GOT LOST AND THE TV IS STUCK ON THE INPUT CHANNEL. I'VE ALREADY TRIED SEVERAL UNIVERSAL REMOTES, BUT STILL CAN'T MAKE IT WORK. WHAT OTHER OPTION DO I HAVE...


You need the original remote to change internal and setup options. Universal remotes can only do the basic functions.

Do a Google search to see if someone somewhere has an orignal remote for sale.

Jerry G.

Apr 28, 2008 | Projection Televisions

2 Answers

Sanyo tv...something is wrong with the imput on my tv or on the remote. the screen says to check all terminals on back and press the up channel key. when i do this it just scans the channels then returns...


jtrent2- O.k you say your t.v has nothing hooked to it at all, what do normally have hooked to it. Do you normally run coax cable,or rca input. The tv is looking for your source ,hook up your regular source, and see what you get. The tv needs to see a source,of some kind. Try hooking a vcr to the cable connector on the back, play a tape and scan your channels.The tv should pick up the vcr as channel 3 or 4 and lock in. Try this and let me know,I can help you. cooltek Mar,3/08

Mar 04, 2008 | Projection Televisions

3 Answers

We need the 3 digit code for a Sanyo FXVR remote to work with a 32" tv, model # DS3224. The remote we have has lost it code and will no longer work with the TV. Please advise


Program 100 under tv mode
Hold down tv mode as you enter (100) then release tv mode button the red light should flash 5 times signaling it accepted the code and you should be good to go

Jan 19, 2008 | Projection Televisions

1 Answer

Sanyo TV stuck on video channel


sanyo ds35590 no remote, tried universial remote still cannot select menu on uvm. What remote do I need? Or can I get into the menu without remote. I am trying to watch a dvd.

Jan 17, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...