Question about Storage Controllers

1 Answer

Digital Picture Frame

I have a Quantaray Digital Photo Frame and cannot understand the manual regarding loading pictures. When I turn it on I get a green sign that says "Please Insert Card". I have it plugged into my computer but that doesn't seem to work. The manual tells me to hold down the exit button a few seconds to enter the setup menu, but holding it down doesn't do anything. I want to load photos on it - it's a gift I wanted to give tomorrow.

Posted by on

  • LindaL Feb 14, 2008

    It does have a USB line and says "Connect the machine and a computer with a USB line, and the memory cards in this machine may transfer and save files/photos from the computer, vice versa.


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is not designed to plug into your computer. The device has no memory to store photos or music. You have to copy your photos onto a USB thumb drive or a NON SD memory card.

Posted on May 29, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Vivitar dpf-14 digital photo frame goes to usb connected and nothing

click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply

hope this helps you

Sep 20, 2011 | Storage Controllers



Restore and Data Recovery on Flash Drive
Files on a flash drive can be corrupted if it is not removed from the USB port properly.
Before removing the flash drive click on the Safely Remove Hardware icon and then click on the flash drive you want to remove and then remove the flash drive when the computer message says it is Safe to remove.
To restore the flash drive you need to format the flash drive, but you will lose the data stored on the flash drive.
If you need the data on the flash drive these WEB sites may help: -
Data and Digital Photo Recovery

on Sep 09, 2010 | Storage Controllers


How to flash your disk [USB]

How To Flash Your Flash Disk
[ USB ] Universal Serial Bus

  • First : Open Your USB Disk ( Like The picture )
  • There are two black Ships , marked with Three codes
  • A code has 6 Numbers , A VID Code and A Pid COde
  • copy all the codes to a bloc-note
  • open this site :
  • Write The First Code Second Code and The Third code (Like The Picture)


1) Click Enter
2) The Site Give's You A lot Of Information
3) Choose You usb Disk Data (See The Picture)

4) Download The Flash Application
5) Connect Your usb Disk On The Computer
6) Open The Flash Application
7) It give's a button written on it : << Flash /or/ Preformat >>
8) Push The Button , Wait For A minute
9) Your usb disk Will Be Flashed ;)


Please Rate .

on Jul 07, 2010 | Storage Controllers

1 Answer

I have a WD Elements 1tb. When I first got it, the device worked great. I placed just about all my pictures on it and then other day I went to use it and it will not work. It shows no drive, the light...

Connect it to a different computer, to see if the problem continues.
If so, then the WD Elements has two major components:
* the disk-drive inside the enclosure
* the USB-to-disk-drive adapter

Disassemble the enclosure, and extract the disk-drive, and directly connect it as a "slave" device in a desktop computer, and see if you can read the files.

As a last resort, search online for "data recovery services", which are commercial companies that will disassemble the disk-drive, and repair it just long-enough to copy your files. Not cheap, but if you REALLY need to get the pictures, it's your "last-hope".

Oct 07, 2010 | Western Digital Storage Controllers

1 Answer

How do i load pictures on the flash drive? never used one of these flashdrives before

Loading pictures from usb to computer

1. Put your flash drive into the usb port of your computer.
2. Click on Left Click on Start and Left click on My Computer.
3. There will be a new drive letter, more than likely E:\.
4. You can copy multiple copies or single copy by clicking on one
picture then you can hold down Control key and select the ones
you want to copy.
5. Leave the mouse on the last picture you selected, then right click,
and tell left click on copy.
6. Go to your local drive C:\ and if you want to make a new folder to be
organize, and click on that folder and right click and tell it paste.

Dec 07, 2009 | ASUS Storage Controllers



Dear Guys, If you find the problem same as the contents above. Please kindly following this step :
  1. Find VID (Id Vendor) and PID (Id Product) of your type Usb Flashdisk/ Pen Drive, Use This Software USB VIEW, see this picture to find :

2. after you already find your VID and PID, you can enter this website to find correct software to use. , maybe this web use Rusian Languange but no need to worry you just fill up your VID or PID at search Box, see this picture


Good Luck, Or If you need my support, i will do.....

on Mar 22, 2010 | Storage Controllers

1 Answer

I put 2 disks in raid 0 array on this controller

When you say "after merging the driver via a floppy at the txt setup" I think you are referring to pressing the F6 key to load the raid drivers. But I don't understand "restarting setup".
You will need the correct XP64bit drivers loaded on a floppy for this to work.
Maybe a good place to start is a temporary install of XP using 32bit drivers to prove all components are working.

Nov 01, 2009 | Adaptec 1220SA (2232100-R) Storage...

1 Answer

Ps3 controller buttons are not working and can only move up and down on menu i dont understand why?

Hello my friend,
It's easy to troubleshoot this problem and find out the reason of that:
- Try with different Games. - Test all buttons on the controller while you are playing and when you are on the menu. - Plug the Controller to the second port.
If the problem is not fixed that means the controller is broken and you will need to replace it, you can get it for a cheap price online or in games stores.
Best Regards,

Oct 30, 2009 | Sony Storage Controllers

1 Answer

I cannot transfer photos onto my memory stick from windows photo gallery on vista home premium. I right clicked on the folder name looking for either ''send to'' or ''save'' so I could transfer the whole...

Drag and drop. open my computer and select source file, then click my computer again and select the memory stick ( you should have 2 open windows, best if minimilised ) then just drag and drop. Mouse over, left click and hold the left button drag the picture(s) to the stick and let go of the left button.

Apr 26, 2009 | Storage Controllers

1 Answer

Need to know how to get files

the pictures are not on the sim need to download them to a micro memory card from the cell phone then to the reader /writer..

May 17, 2008 | Storage Controllers

Not finding what you are looking for?
Storage Controllers Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Storage Controllers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Robert Graf

Level 2 Expert

156 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Storage Controller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides