Question about Refrigerators

2 Answers

Deli drawer Fride deli drawer falls down constantly , will not stay in track, why? Can this be fixed?

Posted by on

  • 1 more comment 
  • tt869 Oct 04, 2008

    I have Kenmore 106.54606300 same happens with deli drawer... it is not wide enough to fit the tracks will....

    Also, the tracks that are hung from the brackets that support the glass shelf keep falling out!!! There must be some kind of "locks" available to keep the tracks in place????

    Thanks, Tom


  • Gary Davd
    Gary Davd May 11, 2010

    well first off you need to post a model number so we can see what you have 2nd you need to be as specific on your problem

  • PATRIA FRIAS-COLON
    PATRIA FRIAS-COLON Nov 05, 2013

    model # GSL22JFPHBS; serial #ZG224522

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The tracks are too wide at the rear. Just remove the small drawers and the shelf above the deli drawer. The tracks can be shimmed in an 1/8 inch or so at the rear. Ours is now perfect. I had to point t out to the repair guy, but he agreed and got right on it.

Posted on Jun 11, 2013

Dear Master Tech: The model number is GLRT13TEB3. The problem is every time you try to open the deli drawer it falls straight down.

It is as if the tracks to hold it are too far apart? Also the tracks are part of the glass shelf.

Any help with this annoying problem would be much appreciated.

Thank-you, Nanc T.

Posted on Feb 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Deli drawer is stuck. Off-track. How to fix without breaking?


The Drawer might be frozen in the unit

Take out your food from the freezer and let it defrost for an hour or two then you might be able to get the drawer back on track with just a little tug.

Jun 04, 2015 | GE GTS22KBP Top Freezer Refrigerator

1 Answer

My Kitchenaid refrigerator deli drawer freezes everything, how can I fix this?


Check the air flow vents for ice buildup, this happened with my whirlpool fridge. Hope it helps.

Feb 03, 2015 | KitchenAid Refrigerators

1 Answer

Will the deli drawer work properly without the glass door/lid? The pin broke off the right side and can't be fixed ... plastic broke off the actual drawer roller on the right. Cheap plastic ... disapp


Call in a repair man, it shouldn't cost that much. Yes, your food will be effected without that plastic door, as the drawer has controls and cold settings just for deli items. You need a special glue for cold. I'd call in a repair man, or order a new drawer replacement from the manufacturer.

Dec 01, 2014 | Maytag Refrigerators

1 Answer

Frigidaire French door model 28 cubic ft - deli drawer freezes cold cuts and cheeses. Model FGHN2866PF1


Hello friend, thanks for your inquiry!

I understand that you have a Frigidaire refrigerator, FGHN2866PF1, and your deli drawer is freezing items. You may want to turn down the temperature within your deli drawer, when adjusting the temperature could take 24 hours for your refrigerator to stabilize. If that does not resolve your issue I would suggest removing the drawer and checking over to make sure there are no cracks where too much air may be coming in. If there is too much weight in the deli drawer that could cause the drawer to sag, which may release cold air into the deli drawer. I hope this information has been helpfu. -Matt

Oct 10, 2014 | Frigidaire Refrigerators

1 Answer

Broken shelf


The small meat or deli drawer tracks show to be avail for replacement as a left and right part. Front and rear screws are shown for each track. Since these parts are shown by themselves, the parts should be replaceable alone. Part# 63001371 is the left track Part# 63001372 is the right. About $5.00 each. The full shelf is a Part# 67001532 @ about $31.00. Pleazer Appliance...

Apr 07, 2014 | Maytag MTB1891AR Top Freezer Refrigerator

1 Answer

Need to remove deli drawer


Hi there, it should pull straight out, you might need to get someone with a bit of strength to help you.
If I could I would duck over in a jippy !!

Jan 07, 2014 | KitchenAid Refrigerators

1 Answer

Deli drawer freezing food


The temperature in the section or the refrigerator isn't set correctly.
Also, check the thermostats if it is functioning correctly. PLEZE LET ME KNOW.

Sep 17, 2012 | KitchenAid Refrigerators

1 Answer

Deli drawer hinge broke


Try searching w/ Google on the brand and model no.

Here's one possibility: Parts

Sep 01, 2012 | Whirlpool GI6FDRXXY

1 Answer

Deli drawer


You don't say brand or size but normally if you remove drawer and shelf above it, unless clips are broken(you can order new) install the clips, install shelf and install drawer that no longer falls down.
Joe Don

May 25, 2012 | Refrigerators

2 Answers

Sliding drawer in the top refrigerator section


hi i have the 700tc as well,,ok the best way to place the drawer,,,extend the 2 sliders all the way out,,there is one pin at the end of each slider and 1 hole on each side of the drawer lip which lays on the track ,,,the holes on the drawer must fall into the pins otherwise it will not close,,,so place the drawer on top of the slider ,,,what usually happens is the sliders tend to roll back into the housing of the fridge,,,so while the drawer is resting on the sliders reach under the lip of the drawer and pull each slider until the the holes of the drawer falls into the pins,,,when the drawer is seated in the pins it will close smooth,,,hope this helps

Feb 10, 2008 | Sub-Zero 700TC Bottom Freezer Refrigerator

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4636 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...