Question about Hitachi 43FDX01B TV

1 Answer

Hitachi_43fdx01b_tv no picture and no sound but a clicking noise

Posted by on

  • 2 more comments 
  • blackston Feb 25, 2008

    I get a clicking sound and no picture.

  • cowgill5 Jun 13, 2008

    same problem clicking noise no picture and no sound what is the convergence yoke and what do we do?

  • Anonymous Jun 28, 2008

    I have no picture but power source ok. Red power light on, and audio works.

  • stone13 Aug 02, 2008

    I have the same problem: No picture, no sound from the tv, but i get the wine noise from the power supply like it is starting up but then the noise will drop and then repeatedly try to power up with the same results. I have replaced both the convergence chips and the power supply which have made no difference.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 149 Answers

Umplug convergence yoke if the set turn on the problem is convergence ic' if the problem persist lrt me know

Posted on Mar 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Hitachi 43fdx01B went from a perfectly clear picture to one with red "ghosts" and very blurry. I my TV toast?


No,ur tv have a problems,known as a convergence problems,it dead.Very common problems on the DLP tvs design flaw.Most commom problems are R,G,B mis alignment,will not align,Colors shadows pictures,3D pictured and blurry?The tv convergence board require changing the 2 STK convergence ICS and some or all it resistors are dead,must changes to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jul 26, 2010 | Hitachi 43FDX01B TV

1 Answer

My Hitachi 43fdx01b has no picture it started to get dimmer and dimmer every day for about a week and then no picture just sound, Any help would be appreciated


Ur tv projection bulb that in ur tv right now?The bulb in the tv right now been in used for 1 1/2 or 2 years in use?The tv been watching like every day like 4 or 5 hours a day?The bulb life span is over,must change the bulb.

May 29, 2010 | Hitachi 43FDX01B TV

1 Answer

Hitachi projection model #43fdx01b.distorted color, blue off set. Half moon line at the top, taking top part of picture.


Ur convergence is dead.U need buy a convergence kit,U know how to solder right?Buy it at these websites.Tv Repair World.com or Ebay.com.

Sep 30, 2009 | Hitachi 43FDX01B TV

1 Answer

Tv's picture is messed up.


Symptom: Blue convergence off, bowed inward at the top and bottom with No blue vert movement.
Cause: Replace IK05 (STK392-110) and RK54 (1.5 ohm/1W) and converge. RK50(2.2 ohm/1W)

Sep 20, 2009 | Hitachi 43FDX01B TV

1 Answer

Hitachi 43FDX01B TV Problem


if you have chirping sound .. check your horizontal out transistor that may be one cause there are seven or nine green lights around power supply see if all came on if not call me 520-248-4242 or leave message

Apr 16, 2008 | Hitachi 43FDX01B TV

1 Answer

Hitachi screen goes snowy and sound is totally distorted


Sounds like bad solder connect in tv tuner....can usually be
repaired or replaced.......................T.

Nov 30, 2007 | Hitachi 43FDX01B TV

2 Answers

Hitachi 43FDX01B


You likely have a fuse bad on one of the supplies to the convergence output IC's.  check EP96 and EP97.

Sep 27, 2007 | Hitachi 43FDX01B TV

Not finding what you are looking for?
Hitachi 43FDX01B TV Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...