Question about Washing Machines

1 Answer

Washers going thru the motions of washing but not washing or spinning

Posted by on

  • 2 more comments 
  • k24bkenco26 Feb 14, 2008

    its fulling up with water making noise and thats it.its a hotpoint aquarius 1200. ta

  • k24bkenco26 Feb 14, 2008

    yeah belts still on

  • christine180 Feb 15, 2008

    I have a whirlpool (aqua line 1000) washing machine (about 8yrs old) and it fills up with water, sounds like the drum is moving but it isnt and the drum hasnt siezed as you can move it and the belt is on please help.

  • robert samples May 11, 2010

    whats the brand and model number and what do you mean by going through the motions

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

Have you checked the belt to see if its loose or burned

Posted on Feb 14, 2008

  • robert samples Feb 14, 2008

    what kind of noise are you hearing ive had some of theese where a small foreign object like a nail etc has fallen in the holes in the tub and jamed it you have to take a flashlight and look close to find it have you tried to turn the drum by hand

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer won't spin. Motor goes thru cycle but not spinning


My kenmore washer won't spin - EASY FIX (PART ONE ...

? 5:45
www.youtube.com/watch?v=fRxKs2EEfbU
Feb 1, 2013 - Uploaded by Michael Borders My Kenmore washer's agitator stopped spinning my cloths during the wash. NO BIG DEAL!!!! EASY and ...

How To Fix A Washing Machine That Is Not Spinning or ...

removeandreplace.com/.../washing-machine-or-washer-dryer-is-not-spin...
May 13, 2013 - If your old or new washing machine does not spin we have some diy fix tips ... Fix Washing Machine That Won't Drain - Washer Not Draining ...‎Washer Not Draining Water - ‎Washing Machine Service ... - ‎How To Fix A Washing ...

Nov 02, 2015 | GE GTWN4250MWS 27" top-load washer with...

1 Answer

Why wont my home comfort 1401 washer drain but not spin


There are many things that can stop it from spinning....but the
first place to check is the belt. Is it loose or broken?

Aug 17, 2014 | Home Comfort HCWP1201 1.7 cu. ft. Portable...

1 Answer

Washing machine does go thru spin cycle or drain water.


If the washer does not spin, take off the rubber bumbers inculding the little washers attached, inside the lid. It lowers the lid, which takes care of the problem. I had the same problem. Not anymore! Trust me, if nothing is wrong with any other part of the washer, this will work.

Apr 25, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Excessive lateral travel of tub in spin cycle


there are springs that keep tub centered.also some small glides that can wear.most common prop.spring.most models can look thru bottem .the spring that fails most is towards the back,left rear,goes from washer to body.check that out God bless,tom

Jan 03, 2009 | Whirlpool LXR6432JQ Top Load Washer

3 Answers

Whirlpool super capacity Lsq9549lw0 has trouble spinning on its own.


If the washer does fine thru the agitation cycle (the washing), that means the motor is OK and the coupler is OK.  It would not agitate unless both are OK.  (and don't listen if anyone tells you the lid switch is bad -- machine would not fill & go thru wash cyle). The spin is another matter.  There is a separate tube for spinning the basket.  There is a drive  block at top of the tube (that sometimes fails)  and there is a separate cluch mechanism below, under the tub.  Those places is where you should look.

May 14, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Won't hardly spin


the back and fourth motion is normal. we have a ge and it does the same thing. for the slow spin and burt rubber smell the drive belt is more than likely streched, the fast fix is to replace the belt. HOPE IT WORKS FOR YOU!

Feb 12, 2008 | Frigidaire FEX831CS Top Load Stacked...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...