Question about Denon AVR-485 Receiver

1 Answer

Hooking up ipod

I am trying to hook up an iPod to my Denon AVR-485 and am LOST! How do I do this?

Posted by on

  • Cyndie Short Feb 16, 2008

    Thanks so much! It is working perfectly now...once I figured out I had to turn on the iPod !!!!!!! HA

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

THe easiest way to hook an iPod or any other personal audio player to almost any audio receiver is to pick up a cable having a stereo miniplug (like the plug on your earbuds) on one end, and two RCA plugs on the other end. You should be able to get this cable from almost any electronics or discount store for under $10. The miniplug goes in the iPod's earphone jack, and the RCA plugs connect to an unused input on your receiver. Inputs marked "AUX" or "CD" are a good choice, or even a "TAPE" input. Set the iPod to about 3/4ths volume and adjust the receivers controls for desired volume.

Posted on Feb 14, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect my television to my receiver


go here to get the manual Denon and then the docs tab

Mar 07, 2014 | Denon AVR-485 Receiver

1 Answer

I have a denon avr 2000 dsp and want a manual which nobody has and I want to hook up my ipod classic. There isn't any AUX front or rear and I don't have a dock.


To hook up your ipod, get a 3.5mm to rca cable and use your ipod's headphone jack. Just don't turn the volume way up on the ipod otherwise the input signal may to at too high a level for the receiver.

Apr 08, 2013 | Audio Players & Recorders

1 Answer

I have a Denon 2309 and i hooked up a pre amp to use for my multi room. the issue i'm having i hear the radio station for my multi room, but when i put on my ipod. my multi room still plays the radio...


The iPod signal has to go to the pre-amp as well as the living room amplifier.. You'll have to move the iPod connection so it replaces the radio signal to the pre-amp as it does with the living room amplifier.

Nov 22, 2017 | Denon AVR-2307Ci Receiver

2 Answers

I have a denon avr 2308. The sound stoped working


when using an hdmi input, make sure the "input mode" is in 'hdmi' or 'auto'. i am sure you can remedy your issues with a trip through the setup menu. it very extensive. good luck

Feb 10, 2010 | Denon AVR-2308CI

1 Answer

IPOD hook up to receiver


The problem is the phono hookup, which is not a standard line-level input. Phono is only appropriate for a turntable (record player)


Plug the ipod into any other input, and you'll be all set.

If this helps, be sure to hit the "thumbs up" for me!

Jan 10, 2010 | Denon AVR-3803 Receiver

1 Answer

I have a Denon AVR-1500 Reciever and I would like to connect my iPod to see if I can drive my home speakers from my iPod, the aux jacks and other choices of input jacks do not seem to accept the formatted...


How are you trying to connect your ipod to the Denon? i.e. What connector, or cables are you trying to use?

If nothing else work, you could try and use the headphone output of the ipod to connect to your receiver. ( Cable required would be stere pin to RCA stereo out). The volume control of the ipod will then become the gain control.

Mar 08, 2009 | Denon AVR-1082 Receiver

2 Answers

No surround on Denon AVR-485


Hi you must put the amp into prolgic mode this is fed by a stereo siganal the rears will sound vague and hollow that's all you will get this willnot work with 5.1 or 7.1 good luck

Feb 22, 2009 | Denon AVR-485 Receiver

2 Answers

Hooking up an external audio source (IPOD) to the Denon AVR 3803


Yes it is.  You will need to pick up a mini plug to stereo rca adapter.

Jan 07, 2009 | Denon AVR-3803 Receiver

1 Answer

No matter what I do, I can't hook up my Ipod dock to the Denon 397 receiver I just bought.


The receiver is the DRA 397 model. I don't have a solution yet. If anyone does, I'd appreciate it!!

Oct 12, 2008 | Denon AVR-485 Receiver

1 Answer

CDR/ipod Not Connect wondow message


Select another function, fx V. Aux, then press menu-button. The display should then show "Ipod assign". Use select to find "Ipod: none" and press Enter...

Mar 01, 2008 | Denon AVR-2802

Not finding what you are looking for?
Denon AVR-485 Receiver Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5259 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

74666 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...