Question about Samsung PCJ522R 52" Rear Projection Television

1 Answer

T.V. I LEFT OUT A 2..SORRY... ITS.. MODEL NUMBER.. PCJ522R.. ..... WHAT IS A IC??... ....CAN U SEND ME A MAP OR DETAILED PARTS THAT U R TALKING ABOUT SO I CAN PULL EM .. ALSO CAN I GET A SHOCK, EN THOUGH T.V. IS UNPLUGGED??.. U SAID remove the back and see if these huge Ic's STK392-040 are mounted separly from everyother board and are mounted to the crt mount .. NOW.. THAT IS WHAT XACTLY??.. WHAT DOES THAT PIECE DO??.. .. I THANK YOU VERY MUCH 4 ALL YOUR HELP U CAN GIVE ME SIR!!..

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 206 Answers

Afraid you have the Bad Samsung set The convergance Ic's are mounted below ot a differant board that I described. If you are good at soldering simply replace the Ic's STK392-040 there are two, if you simply want to replace the entire board the part number for youre set is AA95-00055E and it's about $250.00

Posted on Feb 13, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Samsung 52" Older Big Screen went out. When I plug it in, it makes a funny sound like it's trying to come on then starts clicking sounds like a cricket noise. any ideas??? model pcj522r

The convergence is dead.It cause 3D colors misalign
and clicking chirping noise with no power on.Know how how to solders?The 2 Convergence ICS must change and all it resistors. Tries Tv Repair, for the convergence kit to repair it ur self.The shop will cost $300 for parts and labors.

Feb 07, 2010 | Samsung PCJ522R 52" Rear Projection...

1 Answer

I need an IC Part for the TV. Are these expensive parts and is it a difficult repair job ??

I asume you're talking about convergence IC's? The IC's themselves are about $50.00 total
convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and check the surrounding resistors. Shops usually $200-$400 Be sure to vote/rate me if this helped Thanks!
See link for more detail

Nov 25, 2009 | Toshiba 57H81 57" Rear Projection...

1 Answer

Convergence Problems with red to left of screen.

Replace Both STKs convergence ICs number of part will be on them STK392-110 if this is the number use 180s To order Parts Go To or Call 1-900-223-3205 These ICs are big black chips.

Dec 14, 2008 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer


this indicates to me that one of the convergence convergence output resistor has open. there is a slight chance that the convergence ic amplfer is at fault. but the fact you can go left and right and not up and down makes me feel its the resistor. IM sorry thats techy talk. do you have any electronic traning. let me know make and model and ill try to get the component number and value for you

Nov 22, 2008 | Toshiba Televison & Video

4 Answers

Blue shadow

If it is a projection TV , like the model in title, then it is not a convergence problem.

Describe the problem in detail and confirm the model number for the TV.

Oct 02, 2008 | Akai PT4298HD Rear Projection Television

1 Answer

Blue convergence

yes you can just replace the board as a unit , but they are pretty exspensive compared to replacing the ICs as the ICs are what wear out.

Jun 07, 2008 | Samsung PCJ522R 52" Rear Projection...

2 Answers

Samsung pcj522r shuts off randomly

samsungs have convergence ic that heat up and cause tv to shut off but most of the time the colors will be off. Alsp solder connections could cause this on voltage guess would be convergence ics cost for repair is 250.00

thanks doctor video

May 12, 2008 | Samsung PCJ522R 52" Rear Projection...

1 Answer

PCJ522R 52 /Power Deflection Board

we can give you a quote on what we can rebuild your deflection board for if you go to this link and send us an email request stating model nuber and part number of the board you need rebuilt. all our boards are completely rebuilt and are guaranteed.
Heres the link.

Mar 24, 2008 | Samsung PCJ522R 52" Rear Projection...

1 Answer


Hi Steve,
Sorry...I got out of television repair before ever working on projection screen sets, so I have no idea.

I know there should be three tubes, one for each primary color, but I don't know if there is some way to discharge all at one time, or individually.
If Fixya has me listed as a projection tv expert, then I apologise, I am going to check that now.
Good Luck!

Mar 18, 2008 | Samsung PCJ522R 52" Rear Projection...

1 Answer


part numbers AA91-00607A and BP96-00645A the Bp part number is the bag hoses and ends for all three CRT's sold in a kit form and has all you need

Aug 30, 2007 | Samsung PCJ522R 52" Rear Projection...

Not finding what you are looking for?
Samsung PCJ522R 52" Rear Projection Television Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69808 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides