Question about Epson Stylus CX3200 All-In-One InkJet Printer

5 Answers

Epson cx3600 printer

Hi can anyone show me how to get thing apart starting from the top! Or is there a workshop manual anywhere for free? Yes i know i can get one if i pay! I have found a sscservervise prog for free and it looks good but i cant get the thing apart?

Posted by on

  • 1 more comment 
  • wooger
    wooger Feb 16, 2008

    Not sure how to rate this answer!!!!!!! Because i need to get the thing apart in order to fix the problems with it!!!!!!!!!!!!!!!!!!!!!!!!!

  • wooger
    wooger Feb 17, 2008

    I have the sscservise program and it says current value for the waste ink is at 2385, what does the counter go up to before it says the printer needs a service? And is there anywhere i can get hold of a free workshop manual for it. I think after the paper jam it might have dislodged the arm for the paper feed. When i did a run of 100 it worked ok but had about 7 blank pages mixed in with the printed ones?

  • kermit366769 Dec 29, 2008

    Looking for circuit diagram - i dont want to throw it away

×

5 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 68 Answers

You do not need to dismantle the printer for resetting or ink pad replacement.

Please go to my website http://www.the-inkstore.co.uk . I have the latest version of SSC Service Utility to download directly onto your computer and instructions on how to use it, what to click on etc etc. Click any of the Epson links if you can't find it, everything you need to know will be there, including printer Firmware resetting which sorts out a multitude of problems.

The 'maintenance required' problem with Epson printers has absolutely nothing to do with which cartridges you are using, it is a built in page counter in your printer firmware, which has a different maximum amount for each Epson model. Don't listen to old wives tales and heresay, we are the experts and it's an Epson scam to cause a lot of people to pay for maintenance or throw their printers away.
I haven't found a model that can't be reset with the latest version of SSC Serve or the manual reset on my site.

For Epson RX500 users there is also a manual reset on my site, as the SSC Serve software won't do it for you.
When using the program & choosing your printer from the list, it may have a weird name with 'x' in the model number, this is because some configurations are for many models in a series. For example, the C46 will be listed as C4x as it is for the C42, C44 & C46 models.

I hope this helps all Epson users to overcome the Epson scam of page counting and locking out until you pay their dealers money for maintenance.

If you like what I've done for Epson users, please show your appreciation by spreading the word and perhaps buying your ink from my site.

Happy trouble free printing

The INK Store (UK & Europe)

Posted on Jul 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i have black smudges on my print outs, any help? i reset the counter as it was service time, however i did clean the ink pads that i could see from the top. maybe there more? or something else needs doing?

regards
carl

Posted on Jul 25, 2008

Cx3600 One of the colours will not print out, how do I open up the machine to check if a part is disconnected.
Bill

Posted on Jun 10, 2008

I had a bad paper jam, managed to get most bits out but had problems ever since. I want to wash the waste ink pads and the sponge on the print head runners. I need to take the top off in order to check if the paper feed bit is ok, and if there are any bits i have not got out. Thanks for the help

Posted on Feb 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Epson Master
  • 691 Answers

Why do you want to take it apart?

Posted on Feb 13, 2008

  • Inky Fingers
    Inky Fingers Feb 17, 2008

    What problems have you encountered with the machine? I ask because if you have problems like a scanner error or a message that says something like "parts inside your machine have reached the end of their life..." then taking the machine apart will not fix the problem and is more likely to create more issues than it fixes. If you can advise the problem you have, we may be able to offer a solution without ripping the machine apart.

    If you have the "parts inside..." error you will need a piece of Epson service software to cure the issue. Scanner errors for example can rarely be cured by doing anything other than replacing parts.

    If you have lost print quality many people want to pull the head out to clean it. Often cleaning and unblocking nozzles can be done much more safely without removing the head or even taking off a cover.

    If you let us know more about your problem will endeavor to fixya in the easiest way.

    It's best not to rate a thread until you have exhausted all options.

  • Inky Fingers
    Inky Fingers Feb 18, 2008

    You can find a Epson CX3200 service manual herehttp://www.tradebit.com/filedetail.php/8... if you are sure you need it.

    I do not recommend using the SSC utility as it has been reported to write incorrect info to the main board on some machines and render then useless. The official Epson service utility reports the counter value as a percentage. so if it's anything near 100% you simply click the reset option.

    It is quite possible that your paper jam has dislodges the sensor flag for the paper present sensor. This would result in a false paper jam error that does not clear. If the error is intermittent it is more likely a scrap has been left near the flag.

    As for the odd blank pages among a run of 100 - I would call that good to normal for any CX !! Paper mis-feed during printing should not happen, but once the newness starts to wear off, paper can present itself through the ASF in strange ways and the printer will often cope simply by feeding the sheet straight through.

    Hope this sheds a little more light for you.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epsom stylus cx3600 lost install cd.


The CD really only contains the drivers for the printer. They are provided freely by the manufacturer. Here is the link for your printer:http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-CX3600
Please leave me good feedback! Thanks :)

Jul 29, 2011 | Office Equipment & Supplies

1 Answer

Need to install epson cx3600 but have no disc


You can get all the free software you need for your printer from this Epson website http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-CX3600/Drivers-Support?supportLandingPage=true

Please dont forget to rate me ........... thanks from Scott

Nov 01, 2009 | Epson Stylus CX6000 All-In-One InkJet...

1 Answer

A metal ring has fell into my cx3600 and now paper won't feed and can;t get to the ring i need to know how to strip my printer to get the ring out can anyone help . many thanks


Service manual available here

http://www.eserviceinfo.com/index.php?what=search2&searchstring=CX3600+CX3500

But try turning upside down first, it may just drop out.

Sep 18, 2009 | Epson Stylus CX6600 All-In-One InkJet...

2 Answers

Bought new computer cannot find disc to install and run my epson stylus cx3600


Go to epson.com, drivers, and look up your model. They don't list a cx3600. Is it a cx3200?
If so, download the drivers.

Aug 28, 2009 | Epson Stylus CX3200 All-In-One InkJet...

2 Answers

Epson cx3600 has ended its service life


Try updating your drivers, go to Driver Detective,

May 20, 2009 | Epson Stylus C88 InkJet Photo Printer

1 Answer

Urgent: red light error on Epson Stylus CX3650


It appears that this is an overseas model (at least for those here in the US that is) as far as I can tell. This will use the same drivers as the CX3600 model though. Depending on how long you have had this and how often you use it, you may have a waste ink reset situation. While I have not had any personal experience with this model, there are several references on the internet on how to do a reset. There is even an "SSC Service Utility" you can search for that lists this printer as being supported. It cannot reset the ink counters but it may reset the waste.
Good luck, I hope this is of some help.

Oct 18, 2008 | Epson Stylus Multifunction Inkjet Printer/...

2 Answers

Disassembly of Epson R220 printer


Check out this thread you won't be disappointed

Good Luck

http://www.fixyourownprinter.com/forums/printer/51941

Apr 02, 2008 | Epson Stylus Photo R220 InkJet Printer

Not finding what you are looking for?
Epson Stylus CX3200 All-In-One InkJet Printer Logo

1,742 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...