Question about Projection Televisions

1 Answer

Nakamichi Plasma VU50P black stripe

Our Nakamichi plasma tv (VU50P) has developed a black stripe in the upper lefthand corner - about one foot long and one inch wide. Something burned, as there was some smoke the day it did this. Is it fixable?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 95 Answers

Yes all set or fixable, you will need to order the y board, or driver board this is the power supply supply the defflection to the screen. I have tried several time to try to fix them, and didn't have luck at all, just a wast of time, there waxed and most of the time can't take part's out because they also clued them.
This process is faster for them when the machine makes the board, parts don't move.
Y board just got one narmaly goes about $400 and up.
This is the reason why most people just toss out there set, and they get mad at the tech, don't know why, it's not there problem they don't make the board.

I would open the back cover to see were the smoke came from, you will see some burt mostfet's or resistors. The part # narmaly is writen on the pcb. Call them and ask them the price. You will see, why most set's or found at the grave yard.


I hope this help's

What About Bob

Posted on Feb 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Visio #P42HD developed a vertical red stripe on each side of the screen about 3 months ago. It was not bothersome, but now a blue stripe has developed on the left side. Help!!! renthelp249cb


Encompass Parts Distrubtion has parts for this TV on most vizio they replace Main board tuner board.1-800-638-3328 you can also look on E-Bay for better Price on Parts, they had this board for $169.00

Feb 22, 2010 | Projection Televisions

1 Answer

3 Black vertical lines on my Gateway Plasma TV


i just fixed my gateway 42"plasma with the exact problem.  go to this link, and read entirely and follow!
http://www.avforums.com/forums/plasma-televisions/462873-black-line-fault-hyundai-hpt4240-fixed.html

enjoy!
stephen

Oct 30, 2008 | Projection Televisions

1 Answer

I have a philips 50pf7321d plasma tv and the screen suddenly split, half picture on each side of screen, and black bar inthe middle.


Black bar caused by a short IC on the ribbon of the plasma panel. Unfortunately it requires a new plasma panel. Cost of a new unit.

Apr 23, 2008 | Projection Televisions

1 Answer

I have vertical stripe in the middle of the screen of my panasonic plasma tv


Generally speaking vertical stripes whether they are black or white can be caused by bad connections at the panel cables. If this set is under warranty, bring it in for warranty service. If you can, take a picture of the problem as well and have that with you. Moving the set to the servicer can sometimes "cure" the problem especially if it is a connection problem.
Keep us posted.
Dan

Apr 17, 2008 | Projection Televisions

1 Answer

Black line down the middle of plasma tv screen. After it warms up the line disappears.


It sounds like a possible bad connection on the upper or lower drive board.
You could disconnect power, remove back cover (carefully it will have sharp edges) and disconnect the ribbon from the plasma panel to the circuit boards on the top or bottom of the panel.
these ribbons are held down with a lock type conector of different types. Inspect carefully before unlocking connector, once unlocked and ribbon is removed look for any damage to the contacts then reinsert ribbon and lock connector.
If this doesn't work then you will either need to replace to drive board or the plasma panel

Apr 04, 2008 | Projection Televisions

1 Answer

Black vertical line 3inches in from the left on my fujitsu PDS4233W-H plasma screen


If the line is all the way from top to bottom, it could be your upper and lower buffer boards or your plasma display unit is bad. I suggest you contact a servicer for your brand.

Apr 01, 2008 | Projection Televisions

1 Answer

Plasma tv has developed a black stripe in the upper lefthand corner, about one foot long and one inch wide.


This could be a bad thing, hopfuly only a driver board has failed and need replacment , Now for the worse case, the panel has failed. If thats the case it almost allways cost more to replace the panel than to replace the set

Feb 13, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...