Need a memory stick for DCR-DVD610 DVD Camcorder

Have you actually charged the new battery ?

Google for it

Did you save it to disc or memory stick?

No. See page 21 of this manual.

Install the driver of the camcorder to the PC and then run the program . Now connect the camcorder and you need to go according to the interactive window display.
The recorded memory can be transferrred and saved to a marked folder and copied to a DVD disc from the PC.

Hi
Just Try This
if you want transfer my videos from CAM to PC then you have to Finalize the disk first of all fallow this setup
Connect the AC Adaptor to the digital video camera.

1. Plug the AC adapter into a working wall outlet.
2. Turn on the digital video camera.
3. Press the SETUP button.
4. Press the UP ARROW or DOWN ARROW button to select DISC SET.
5. Press the ENTER button.
6. Press the UP ARROW or DOWN ARROW button to select FINALIZE.
7. Press the ENTER button.
8. If still images are recorded on the disc, press the UP ARROW or DOWN ARROW button to select PHOTO MOVIE CREATE.
9. Press the ENTER button.
10. Press the UP ARROW or DOWN ARROW button to select EXECUTE.
11. Press the ENTER button.
12. Press the UP ARROW or DOWN ARROW button to select YES.
13. Press the ENTER button.

When the finalizing completion message appears, press the SETUP button

1 x Memory Stick PRO Duo Supported,

open ur camera and remove ur front cover section and put any type contact cleaner inside then it will ok

it's either you finalized a disk or your memory stick is full. if possible delete recordings and or photos in your memory stick to enable recording, or put a blank disc..once a disc is finalized it cannot be used to record on the cam but could still be viewed on the cam by selecting the media format,

plz check the manufacture website for the drivers