Question about PC Desktops

1 Answer

Jetway M2A692-GDG tv out header pinouts ? can u find his specs ? 10k u or mail to goromi60@abv.bg

Posted by on

  • 1 more comment 
  • goro130 Feb 13, 2008

    i ask for pinouts because the header is on motherboard, not on a conektor board at the back. look on http://download.jetway.com.tw/download.a...

    for manual and tell me if there is a any chance this board to provide a s-video , somposite video or RGB signal for a old generation tv sets. excuse my english i'm not exactly fluent on a writhing. 10x again

  • goro130 Feb 14, 2008

    do u have any idea where to find plans for a such device ?

  • goro130 Feb 14, 2008

    thank you. thank you. thank you

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

This link will give you pin outs for your PC's standard ports...
Click HERE

You can find pinout for your HDMI hook up by clicking HERE

It maybe more helpful if you will tell me what you are hoping to accomplish but as you have only asked for pinouts there you go.

Posted on Feb 13, 2008

  • Chris Lemke Feb 13, 2008

    http://www.starkelectronic.com/pi4925.ht...

    Best solution to problem or you can obtain plans abd build one your self for around 20 bucks in parts from Radio Shack

  • Chris Lemke Feb 14, 2008

    http://www.tkk.fi/Misc/Electronics/circu...

    Copy and paste the link above to your browser, you will find complete circuit layouts for what you need there including a component list.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need pinouts for the sony vaio pcv-1116's motherboard


This is Not a Solution. Using Solution box as a Clarification/ Comment box.

What other model numbers are there listed? I should be able to cross-reference a PCV-1116, but cannot. Once I find the motherboard, I may be able to tell you what the pinouts are.
(Such as Front Panel header pinout on the motherboard)

Post back in a Comment.
Regards,
joecoolvette

Dec 12, 2012 | PC Desktops

Tip

Scams and Phishing on Yahoo! Mail.


If you receive an email asking you to update your banking details or that you've won a huge sum of money from Yahoo! then these are scams. Firstly a bank will <b>NEVER</b> ask you to update your account details through an email, don't under any circumstances click on any links within a mail like this. Secondly, when you receive a mail stating that <b>YOU</b> have won a huge sum of money from some lottery in some foreign country or from Yahoo! this too is fake. The Yahoo! Corporation in Holland Lottery scam is one of them. Again don't by any means reply to it or send them any of your personal information. Contact Yahoo! <a href="http://help.yahoo.com/l/us/yahoo/helpcentral/helpcentral_contactus.html">here</a> and click on <b>Mail</b> under <b>M</b> in the list, this will take you to a page to login. Login, then click on the heading <b>Got Spam? Report it here</b> as shown in the following picture:<br /><br /><img src="slasher_x_26.JPG" /><br />This will take you to a page where you need to tell Yahoo! everything about the scam, including the Full Headers and Contents of the mail. I will explain how to get the full headers of an e-mail now.<br /><br /><b><u>How to copy the full Headers in Yahoo Mail!</u></b><br />1) With the e-mail open, click <b>Actions</b> to the top right.<br /><br /><img src="slasher_x_27.jpg" /><br />2) This will display a drop down menu shown here:<br /><br /><img src="slasher_x_28.jpg" /><br />3) Click on <b>Full Header</b> to display the following window:<br /><br /><img src="slasher_x_29.jpg" /><br />4) Copy the entire text (all the words in this window) to the headers box:<br /><br /><img src="slasher_x_30.JPG" /><br />5) Then copy the contents of the mail to the next box:<br /><br /><img src="slasher_x_31.JPG" /><br />6) And then click submit.<br /><br />Easy as that! This will enable Yahoo! to filter such scam e-mails in the main server and prohibit them from entering anyone's account in the future, and it's all thanks to you!! Good Job! Feel great, you have just saved a huge amount of people from falling for these ingenious scams.

on Nov 15, 2010 | PC Desktops

1 Answer

How do i hook up usb button in intel 845 motherboard


Well, that's a start. You know you have an Intel motherboard in your eMachines, that uses an Intel 845 motherboard chipset.

It is an Intel D845GVSR motherboard.

http://www.intel.com/support/motherboards/desktop/d845gvsr/sb/cs-008823.htm

Left-click on the blue -
Intel Desktop Board D845GVSR Product Guide (PDF)

This is a PDF file. The computer you are using now has Adobe Reader on it, which uses PDF files.
(I would advise upgrading to Adobe Reader X { 10 }, however, if you don't have it )

After you click on the above link, it may take up to 30 seconds before the first page comes up. (Took 6 seconds just now. Adobe Reader X, and medium speed DSL connection)

At the top of the PDF file, is the PDF file page number box.
It is to the left of the Down Arrow.
Go to Page 11.
T is the Front Panel USB header.

This is where the USB ports on the front of the computer, (Front Panel) connect to.

Go to Page 31.
E is the Front Panel USB header.
The Front Panel USB header is J9F2.

Observe the numbers next to the pins.
Go to Page 33.
This is the pinout for the Front Panel USB header, using those contact pin numbers.

1, 3, 5, 7, and 9 = one USB port
2, 4, 6, 8, and 10 = one USB port

Notice pins 9 and 10 are not used.

You can connect two USB ports to this header.

The pinout of ANY USB connector, female, or male, is set to a Standard.

This is the standard pinout for USB connectors,

http://pinouts.ru/Slots/USB_pinout.shtml

In case you cannot download the Intel D845GVSR motherboard manual;

Looking at the motherboard in it's normal position, installed into the computer case, the USB header is on the Bottom edge of the motherboard.

It is to the immediate Right, of the bottom white PCI slot (PCI 3)
It is to the Left of the motherboard mounting hole.
It is Below the Intel 82801DB, Southbridge chip.

Two rows of pins.
5 across the Top row, 4 across the Bottom row.

STARTING on the Left side, (Towards the white PCI slot), and going towards the Right, the pins on Top are numbered,
Pins 2, 4, 6, 8, and 10

STARTING on the Left side, (Towards the white PCI slot), and going towards the Right, the pins on Bottom are numbered,
Pins 1, 3, 5, and 7

Pins 1, 3, 5, and 7 = One USB connection
Pins 2, 4, 6, and 8 = One USB connection

Pin 9, and Pin 10 are Not used. (N/C. No Connection)

A) Pin 1 is for Power

B) Pin 3 is for D-
The Data, or Signal wire. It is the Negative connection

C) Pin 5 is for D+
The other Data, or Signal wire. It is the Positive connection

D) Pin 7 is for Ground

Going to the other USB header;
A) Pin 2 is for Power

B) Pin 4 is for D-

C) Pin 6 is for D+

D) Pin 8 is for Ground

For additional questions please post in a Comment.

Out of curiosity which eMachines is this?

Regards,
joecoolvette

Nov 24, 2011 | E-Machines eMachines Desktop PC

1 Answer

Reconnect the HDD LED, PWR LED, PWR SW, RESET SW


You pretty much need a flashlight and a magnifying glass to have a look see at the header on the motherboard. The pinout is printed on the board in _very_ small print. The LED's are the only ones that require polarity to work. Connecting the wires wrong won't hurt anything...it just won't work the way it is supposed too. A little trial and error may be in order.
Another, more accurate solution, is to go the manufacturer's website for that computer and download the user manual. The pinout will be in the manual, usually under "front panel connections".

Dec 22, 2010 | PC Desktops

2 Answers

I m trying to install a new motherboard and i need the manual or motherboard diagram for the pinout for the power connector


You need to specify the motherboard's make & model in order that I could provide you with further assistance.

Mar 24, 2010 | PC Desktops

4 Answers

How can i upgrade version of flash of farmville


Try this link to download the latest version of Flash.

http://download-official-version.com/flash/3/index.asp?aff=11231&camp=yh_flash_us&se=yahoo

Oct 18, 2009 | PC Desktops

1 Answer

Man or som on who know where can i get wow stat changer pls post me at saiara1@abv.bg


Assuming you are talking about private servers, then you can use either cheatengine from cheatengine.org or wowemuhacker from deathsoft.com. If you are looking for a stat changer on official servers, then it will not work, since the stats are kept server side and are watched by Warden. Thats not to say it's impossible, however unless you are willing to learn to use and read WoW packets, using a packet editor such as wpe pro, then it is unlikely you will be able to find a simple solution.

Other references can be found at rpg-exploiters.com.

Jul 03, 2009 | Acer PC Desktops

3 Answers

Need Motherboard Jumper/Socket Pinouts


Did you ever solve the connector pins? I did for a MB I purchased. Respond on this and I will post the solution.

Apr 14, 2009 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...