To repair the hp psc 1410 cartridges

Som sorry. PSC1410 uses cartridge HP21 for black and cartridge HP22 for color. PSC 1510 uses HP92 and HP93.

There are several reasons why the HP All-in-One may fail to align the cartridges. The most common reason is an ink cartridge that has one of the following problems:

• One of the ink cartridges is low or out of ink. Black and all three colors must be available.
• The paper has already been printed on or is colored paper.
• Protective tape on a new ink cartridge has not been removed.
• Contacts on the ink cartridge are not meeting the contacts in the carriage correctly.
• Cartridge is remanufactured or refilled. Refilled or remanufactured ink cartridges may have been damaged during the refilling process or have clogged ink nozzles.
• The ink cartridge is defective

[email protected]

Hi
you need to replace your cartridges
or refill them by this easy method



pls vote us to keep us alive

use the user manul for your printer , for the hp psc 1210 printer , do not use refill ink

Sounds like the printer thinks the cartridge is empty. Old PSC units had a 3 cartridge memory - you kept 3 cartridges and cycled them to trick the printer into thinking it had just received a brand new cartridge, rather than a refilled one.

The "ok" button is your "scan" button... had similiar printer, with similiar problems (PSC All-in-one)

Hope this helps!

You must replace both ink cartridges with GENUINE HP ink carts..

I topped off the ink and pressed enter and set up at the same time...I didn't have to do the page alignment again and my copies seemed pretty good. Thank you to the site for the tips!!! Happy Day connien2003

drivers

What is not working? The printer or the cartridge? If it's the cartridge, try this. fold a paper towel in 4ths, dampen it and place on a flat surface. Blot the cartridge several times on the towel. You should get blots of black with the black cart. and three colors with the color or photo cart. If not... replace. If the printer carriage just won't move and you're shure you have power.. time for a new printer.