Question about EliteGroup NFORCE4-A939 (NFORCE4A93910) Motherboard

1 Answer

NFORCE4 -939 MOTHERBOARD PROBLEM

Hi....I have a NFORCE4-A939 motherboard running AMD Athlon XP 64 3800+ CPU, 1 Gb DDR RAM. problem is about a week ago, the system began to freeze. i removed one of the 512 memory chips, but the system still Freezes and now the computer case give an electrical shock.
the computer does not boot at all now.
Also....I disabled the "BIOS PROTECT" JP3 jumber on the board for a short while, then reanabled it.
The system still shocks and does not boot. also...the chipset fan does not spin at times and sometimes spin slowly.
I have now bypassed the Transformer I was using on the system. The electrical shock is gone, but I am not getting any video. No signal is being sent to the monitor. I am using a Nforce 256 PCI Express Video Card. Could it be that the card is burned out ?

Help...please
Help me please !
thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 178 Answers

Well if you like you can pay for the live chat and I can help you if you like. I work on computers for a living. It would be to hard to truoble shoot this typing a paragraph at a time.

Posted on Feb 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

L7VMM3 motherboard is it upgradable?


Hello here is the homepage:

http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&DetailID=418&DetailName=Feature&MenuID=24&LanID=8#fragment-FAQ

This mainboard uses socket A 462 cpu type.
Look for a amd athlon 3000.
The duron is too slow.
As you know this is only single core.
This cpu can not be bought new anymore.
But a used can be found.

You can upgrade the ram to 2 gb max.
It uses ddr ram.

Good luck

Dec 03, 2012 | Computers & Internet

1 Answer

Upgrade the 1.6GHz CPU on L7VMM2 Motherboard


ECS Support > L7VMM2 motherboard > Main Support page,

http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=419&CategoryID=1&MenuID=50&LanID=0

Click on the CPU tab.

(Features / Specification / Download / Support / FAQ / CPU / etc)

Will support Up To an AMD Athlon XP 2600+,

http://en.wikipedia.org/wiki/List_of_AMD_Athlon_XP_microprocessors


Maximum Front Side Bus support is 266Megahertz.
(Max FSB = 266MHz)

(Motherboard manual states 133MHz.
Note that AMD processors are 'Double-pumped'.
This = 266MHz )

Supports AMD Athlon, AMD Athlon XP, and AMD Duron, processors.

Note in the CPU Support chart where it states -
Socket 462 > AMD Athlon XP > 2600+ (.13u)
The .13u stands for 130nm core architecture technology.

(nm = NanoMeter.
1 Billionth of a Meter )

NOTE*
For the Socket 462 (Socket A) processors, the AMD Athlon XP models are the top of the line.

'Sempy', or Sempron processors are at the bottom.
Low L2 processor memory cache compared to Athlon XP or Duron models.

http://en.wikipedia.org/wiki/List_of_AMD_Duron_microprocessors

http://en.wikipedia.org/wiki/List_of_AMD_Sempron_microprocessors

http://www.cpu-world.com/

http://www.cpu-world.com/CPUs/K7/TYPE-Athlon%20XP.html

Regards,
joecoolvette

Oct 13, 2012 | EliteGroup L7VMM2 Motherboard

1 Answer

I have a DFI LANPARTY UT nF4 Ultra-D and have been been unable to use all of the memory slots. I originally bought 4GB but have only been able to use 2. Is there a setting that i need to enable?


Hi, you can use up to 3 gigabytes on windows xp 32 bit with service pack 3.
You need a 64 bit operating system to use 4 gigabytes of ram.
Here is some info:

CPU
AMD Athlon 64 FX / Athlon 64 / Sempron Socket 939
Chipset
NVIDIA nForce4 Ultra
Front Side Bus
2000MT/s
HyperTransport interface
Memory
Four 184-pin
DDR SDRAM DIMM sockets
Supports dual channel (128-bit wide) memory interface
Supports up to 4GB system memory
Supports
DDR266, DDR333 and DDR400 DDR SDRAM DIMM
BIOS
Award BIOS
CMOS Reloaded
CPU/DRAM
overclocking
CPU/DRAM/Chipset overvoltage
4Mbit flash memory

Aug 30, 2011 | DFI LANPARTY UT nF4 Ultra-D Motherboard

1 Answer

Whats the biggest and or best cpu i can put into this motherboard. i curently have an amd athlon xp 2800. i just bought some more ram and wold like to know if i can speed up the cpu.


Here is a list of supported CPUs.

http://www.ruby-electronics.com/store_item/MSI_Athlon_XP_Duron_nForce2_Motherboard_K7N2_Delta_MS-6570-020

If you're going to upgrade to the XP3000+ (the fastest supported CPU), then be sure to get the one with the 200 MHz FSB.

Also, go with the lowest supported latency DDR PC3200 you can get IN PAIRS. Remember that Windows XP 32 bit only allows a total memory allocation of 4 GB which must include your video car memory and any memory allocation for add-on cards.

So 6 512MB sticks of DDR PC3200 are better than 2 2GB sticks of DDR PC3200. As the 6 sticks will allow for dual channel transfers (above and beyond the Double Data Rate) and will keep you well within your 4GB limit (once you add the video memory and any add-on cards).

You'll also benefit from doing a fresh install of XP with nlite or similar and stripping XP of all of the components you don't use. Good LUCK!

Oct 13, 2009 | MSI K7N2 Delta-L Socket A/nForce2/FSB...

1 Answer

I wish to upgarde to the fasted CPU possible for my motherboard


More importantly RAM will give you better performance, if your computer is low on ram it doesn't matter much what the cpu is.

you can put up to 4GB of ram into it
4 x 184-pin DDR SDRAM DIMM socket support up to 4 GB
Support DDR400/333/266 unbuffered DDR SDRAM

here is a list of supported CPU's
http://www.ecsusa.com/ECSWebSite/Support/CPU_Support_Model.aspx?detailid=493&MenuID=69&LanID=0

I think any of the dual cores on that page will be a OK upgrade.

So if you upgrade your ram to 2GB and a Dual core 4800+ that should be good. but in the long run it might be smarter to upgrade to a new motherboard and even faster cpu, with DDR 2 memory, the memory ddr2 is really cheap these days.

May 21, 2009 | EliteGroup nFORCE4-A939 Motherboard

1 Answer

I want to add more ram in my pc km400/km266


Oddly enough this board has the following specs: The board supports both Althon and Duron processors up to Athlon XP 2800+ (3000+ with a BIOS update). It can handle 3 GB of DDR333 RAM (or 2 GB of DDR400, but not all types are supported). 
That's the older 184pin DDR ram in PC2700 or PC3200 guises. I can see no reason why it would only accept 2gb of the faster Ram.
Why not go over to www.crucial.com  and run the online scan to get the true story on your board?

Jan 05, 2009 | AMD Via KT400 Athlon(XP)/Duron SktA DDR...

3 Answers

Increasing Memory Ram


According to the memory configurator at www.crucial.com your motherboard has two RAM slots that can handle one gig of PC2700 RAM each.

Look here for more information.
http://www.crucial.com/store/listparts.aspx?model=MS-6390

Aug 28, 2008 | Intel Motherboard

2 Answers

Trying 2 figure out what type of memory 2 use?


that looks like an Albatron MoBo but I cant get onto the albatron website to confirm this

Feature

AMD Athlon™/Athlon™XP/Duron™Processor
Socket 462 with FSB 200/266MHz
2 DDR266/200 Memory Sockets
6channel AC 97 Audio
2 ATA133 Channels, up to 4 ATA 133 IDE Devices
6 USB 2.0/1.1 Ports (4 ports by optional cable)
Integrated 3D Graphics Engine


Processor

Socket 462 AMD Athlon™/Athlon™XP/Duron™Processor

FSB / Transport

200/266MHz

Chipset

North Bridge: VIA KM266 ( VT8375 )
South Bridge: VIA VT8235
I/O Chip : Winbond W83697HF


Memory

2 * DDR sockets
DDR266/DDR200 unbuffered ECC/none-ECC DDR SDRAM up to 2GB


Expansion Slots

1 x AGP 4X slot (1.5V Only)
3 x PCI slots (PCI 2.2 compliant)
1 x CNR slot (AMR Type)


IDE / SATA Connectors

2 ATA133 channels, up to 4 ATA 133 IDE devices

Onboard I/O Connectors

1 x Floppy Connector
2 x USB 2.0/1.1 header (4 ports USB cable optional)
1 x CD_IN header
1 x COM (serial) port header (Optional COM cable)
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header with fan rotation detection function
1x System fan headers with fan rotation detection function
2 x 5 pin system panel header (Intel spec)
1 x Front audio header (Intel spec)
1 x IrDA header
1 x Case Open detection header
1 x Wake on LAN


I/O via Back Panel

PS/2 keyboard/mouse, 2 x USB(2.0/1.1),1xVGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MIC

Power

20-pin ATX power connector

BIOS Feature

2Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard, Wake on LAN/RTC Timer



Hardware Monitoring

2 FAN sensors, CPU/System voltages and temperature monitoring.



Special Feature

Certifications

FCC, CE, BSMI,WHQL

Form Factor

Micro-ATX (218mm x 244mm)

Jul 11, 2008 | Intel Motherboard

1 Answer

SYSTEM SHOCKING AND DOES NOT BOOT


first chuck with ur power supply earthing. if ur power supply is correct, then chuck ur SMPS

Feb 10, 2008 | EliteGroup NFORCE4-A939 (NFORCE4A93910)...

Not finding what you are looking for?
EliteGroup NFORCE4-A939 (NFORCE4A93910) Motherboard Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

David
David

Level 3 Expert

751 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...