Question about Televison & Video

1 Answer

When i switch the tv on it goes on to standby then it switches off and on and off and on , it wont stay on

Posted by on

  • igsc16807 Feb 13, 2008

    its not a projection tv its just a tv 32" big heavy bulky flat screen tv

  • Anonymous Apr 05, 2009

    I have the same problem when I turn tv on it goes off and light on front of the tv that says "stand by" flashes on and off

×

1 Answer

Dear ,

It may because of input selection or no signal from antenna/cable/settop box,

Let me know the exact model number your projection TV

Rgds

Shaju T A

Posted on Feb 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TURN ON MAINS POWER STANDBY LIGHT COMES ON THERE IS A CLICKING NOISE ABOUT FIVE TIMES TV DOES NOT COME ON


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Jan 09, 2017 | Televison & Video

1 Answer

I have a lg tv 60 inch tv ln5600 when powering on red stand by light blinks 3 time then no light pic or sound not backlight and no image when using flashlight treid replacing power board does same


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 08, 2017 | LG Televison & Video

1 Answer

Toshiba tv model32w2300A how repair? 0nly in the screen say do not put the power off


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Jan 07, 2017 | Toshiba Televison & Video

1 Answer

I have a HL67A750 Samsung no picture no sound blue light luminated on front 3 LEDs flashing


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 05, 2017 | Samsung Televison & Video

1 Answer

When we plug in the chord an press power the tv come on an the goes off back


Probably a bad power supply in the TV set. Further diagnostics would likley require disassembling the set.

Dec 13, 2014 | Televison & Video

1 Answer

Can't switch off tv


All tvs draw a current so long as they're plugged in, this is what allows a remote device to power them on. Modern tvs will generally have a light to designate this (I think this is what you're referring to as standby). The only way to cut the current to your tv would be to unplug it or if it's connected to a surge protector, switch that off.

Jun 28, 2014 | Televison & Video

1 Answer

How do i fix my elonex tv


switch off.wait for 5 mins.
press & hold power button till it turns on then off.
ifno luck try this-
switch on by pressing power button while holding volume + and -.
keep hold of both until powers on.
can take few mins.
good luck!!!

May 04, 2014 | Televison & Video

1 Answer

Hi, the sound on my Hitachi switches off after midnight every night. I can get it back briefly if I switch it off/on then it goes again? Daytime it's ok & the Pic is fine! Any ideas?


I would go into Setup and timer/ clock. The sound might well be in off position. You should be able to change the clock to your eeds. Kolbrun

Nov 04, 2013 | Televison & Video

1 Answer

URC-22B doesn't work with my BEKO tv.


Check with this method. Manually turn on your tv.
Then push and hold the code saerch button until the light stays lighted release the button.
Push and release the device button you want to set TV.
Now you got to push and release the ON/OFF button until your device turn off when your device turn off stop and push and release the enter button for storage the code.
Warning: You may push and release the ON/ OFF button for almost 200 times.
Good luck.














.

Jun 12, 2009 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...