Question about Multimedia Projectors

1 Answer

Colour problems with projector

Viewsonic projector PJ506D DLP Projector
with laptop using windos xp display set to high 32 bit.
the colours just dont appear on the projection as they do on the laptop screen.
I have tried adjusting the colour,
I the RGB/photgraphic setting
I have tried resetting factory settings (although this didn't seem to change the settings I had made to the colour etc)
what to do?

Posted by on

  • 1 more comment 
  • CESRose Feb 19, 2008

    Thanks catnip20 - if it was just a bit off I would be happy but with a photo of lovely red sunset clouds I get a gloomy greenygrey thunder clouds. manipulating the cable to projector cable like an aerial can improve things. The projector can project red - its instruction panel screens have red. It just wont reproduce red from the computer.

  • tifftr Mar 05, 2008

    The red does not show up on red on through my projector - it's more black than anything. Also the green shows yellow. Really I can only see yellow, black, and blues. I've done everything to reseting to factory setting and everything. Also it's not as bright as it should be - I can barely see it if the lights are on.

  • handyman71 May 21, 2008

    what is the fix for this?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

In short If the reds show as red, The greens show as green & Blue shows as blue. I would say thats as good as it can project. It's hard to judge color without seeing it for ones self but usually DLP projectors that use a colorwheel do not have perfect color.

Posted on Feb 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not only images. even product logo is black and white in dlp projctor


Is a PAL signal being put into an NTSC projector or vice versa? If not then look at a color wheel problem.

Aug 07, 2015 | ViewSonic PJ506D DLP Projector

1 Answer

I have ViewSonic PJ506D DLP Projector it will power up but the lamp wont come on relaced lamp still have problem


Check the power supply , it can be a fault on the power being inadequate or there is an error to the processor that seems to cut off power. try and check the lamp connections, check the lamp door switch, the filters- clean if dirty

Oct 18, 2011 | ViewSonic PJ506D DLP Projector

1 Answer

Projector not working with Imac


Hi,

Please visit below URL and download viewsonic projecter drivers for your Imac.

http://www.viewsonic.com/products/projectors/pj506d.htm

Thanks
Viju

Mar 26, 2010 | ViewSonic PJ506D DLP Projector

1 Answer

Viewsonic Projector PJ506D not working


proable solution the cooling fan is giving problems. the whistling sound most likely is fan rubbing on a wire??? The unit gets over heated and turns off for protection. Good luck

Aug 19, 2009 | ViewSonic PJ506D DLP Projector

1 Answer

My PJ506D Viewsonic projector is projecting an image with too much green. How can I adjust this?


You will have to go into the menu system and find the controls for the red, green and blue guns and adjust the red and blue guns to counter the green.

Atypically if this is an older projector and has seen a lot of use you will start to experience the degradation of luminescence in the tubes.

Resolution: If the adjustments do not resolve the color issue, you will need to have one or more guns replaced. The economics of this replacement point to a new projector.

Aug 13, 2009 | ViewSonic PJ506D DLP Projector

1 Answer

I have set the auto shutdown to maximum, however, the projector keeps shutting after 20 minutes. What is causing this?


Check to make sure that the auto shutdown is turned off. This should prevent any further problems.

Aug 04, 2009 | ViewSonic PJ506D DLP Projector

Not finding what you are looking for?
Multimedia Projectors Logo

Related Topics:

1,491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Are you a Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...