Question about JVC KD-G230 CD Player

2 Answers

JVC KD-G230 I installed my stereo in my 91 BMW, but it only turns on for a second then turns off. The power button dosnt work, but when I press buttons like display and eject it turns on for a second. Whats going on and how do I fix it?

Posted by on

  • computerguy7 Feb 03, 2009

    I have a Sony CDX-GT08 stereo I just installed, hooked all the proper wires up and when I go to turn it on, it shuts off, then comes back on again. And the back of the stereo gets hot, then it blew the radio fuse in my fuse box, the car is an 1987 Toyota Camry Wagon, any suggestions?? Need to get this working.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Use a volt meeter to see if you have 12 volts on the the yellow wire all the time that is the memory. then check the red wire to see if you get 12 volts when the key is on. then do a ground loop check on the black wire then get back to me.

Posted on Feb 13, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 199 Answers

Follow the steps in the following provided and see where you went wrong.

Click here

Posted on Feb 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I connect my Ipod to a JVC KD-G230?


The cord you are using is an audio cable with a 3.5mm plug with two black bands on the plug. The JVC Source button has to be pressed until AUX shows in the display. The volume on the iPod AND the volume on the deck affect the sound - turn the iPod up to 70% volume for best results.

Mar 28, 2010 | JVC KD-G230 CD Player

2 Answers

SETTING THE CLOCK ON JVC AUTO RADIO


Press and hold SEL until menu appears
Using the scan button (FWD/REV), select Clock H
Using the volume knob, set the value
Using the scan button (FWD/REV), select Clock M
Using the volume knob, set the value
Press SEL to save and exit

Jan 22, 2010 | JVC KD-G230 CD Player

1 Answer

How to install a jvc stereo kd-g230 in a chevy trailblazer 2002


First you need to get a wire harness for the Chevy (check Ebay) then follow the wiring instruction inside the package on how to join the spliced wires togother. After joining the wires togother plug the harness in and stuck the JVC into the recess where the old stereo was and thats it, it should play if not you don`t have a good ground, ground the body to the frame.

Dec 19, 2009 | JVC KD-G230 CD Player

1 Answer

How do you set the clock on a jvc kd-g230 car radio


There is a misprint on manual concerning setting the clock. This is the case for similar JVC mobile head units.

The proper way to set the clock for this unit is:

1.)Hold down 'SEL' button count to 3 seconds
2.)Immediately after release of 'SEL' button hit the '>>|' button

This will allow you to enter 'PSM' menu. Every time you press '>>|' it will cycle between, 'CLOCK HOUR','CLOCK MINUTE', and 'Demo' Mode.

3.)Adjust settings by using the 'turn knob' and make sure 'Demo' mode is set to 'Demo Off' for the clock to stay set.

Nov 17, 2009 | JVC KD-G230 CD Player

1 Answer

How to set the time


This is a link to JVC for your KD-G230 manual. Look on page 3 under General Settings -- PSM.
http://resources.jvc.com/Resources/00/00/91/GET0408-001A.pdf

Nov 13, 2009 | JVC KD-G230 CD Player

1 Answer

Setting the clock on JVC KD-G230


Check out this pdf http://resources.jvc.com/Resources/00/00/91/GET0408-001A.pdf

Jun 10, 2009 | JVC KD-G230 CD Player

1 Answer

How do I change the time on my JVC KD-G230 stereo?


its simple. hold the "sel" button until the menu comes up and it will say hours use the volume button to change it. then use the next button to go to the minutes. then you can also change other settings under this menu. hit the "sel" button again to go back.

Apr 06, 2009 | JVC KD-G230 CD Player

2 Answers

JVC KD-G720 car stereo - how to change the time?


How to change clock on a JVC KD-G230????

Apr 06, 2008 | JVC KD-G230 CD Player

Not finding what you are looking for?
JVC KD-G230 CD Player Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

kakima

Level 3 Expert

98921 Answers

xxxxxx xxx

Level 3 Expert

4732 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...