My software disk got broken by accident and I need to load my computer with the Bellkin software so I can get internet on my second computer. How can I get the software or how can I download the software onto my computer again?
Select WBR, then 1310 and click on the GO button
Verify under your router if it's a Rev A, B or D and select the proper link
Scroll down and under Applications click the button Download Now and you will start downloading the same Quick Router Setup procedure that was present on your CD.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you don't have the install disk software from D-Link you can always set it up manual.
First press the reset button on the back for 15-30 seconds to make sure its in factory original setup.
Best way to do this is to connect a ethernet cable to your computer to your router. Make sure the ethernet cable is plugged into one of the ports (ex. 1-4) and not the internet port that usually goes to the modem.
Next once you have the router powered up and your computer connected. (don't have it connect to the modem yet just your computer) open your web browser (Internet explore,firefox).
In the address bar type 192.168.1.1 (same place you would type www.google.com)
This will open the router menu onto your screen. If it asks for a username and password I believe the default for dlink is
username - admin password - password
Once in the setup page go ahead and browse the options and set it up.
After all is said and done. While the router is off reconnect all the ethernet cables back up to the modem and other devices. Power up the router and you should have internet.
If you need further help setting it up let me know.
I think it's broken, or it could just be defective. o to your wireless retailer and let them see what is wrong with it. If the phone is broken, you can't download anything to fix it. Best wishes,Juseppi
Did you reinstall from the manufacturer-supplied "System Restore" set of CD/DVD disks, or did you install from a "generic" Microsoft Windows Vista DVD? If the former, then the correct device-drivers for the manufacturer-specific hardware should have been automatically installed; if the latter, you'll need to access the manufacturer's "support & downloads" web-site, using a computer that does have Internet access (and either a USB memory-stick or a CD-writer), and download the correct device-driver, copy it to the memory-stick or to CD-R or CD-RW media, and then install the device-driver, by reading the software from the memory-stick or the CD-disk.
First of all are you sure there is one inside the computer? Secondly if it is installed inside the pc itself there may be a problem / driver not loaded. Make sure to install the drivers before trying to use your network adapter. Most of the time they come with a disk or you can download software from another computer!Have you tried another Lan Card? Just like any other PC component they can get fried.
Your will have to go to dell's website to download the drivers for your model # . Being that your computer does not have an internet connection you will have to us a computer which has internet access. Download & copy drivers to a cd.If you have you orignal dell dell cd's that came with the computer you can use the driver, utilities disk.