Question about Samsung SMH7174BC Microwave Oven

1 Answer

Samsung MR6699GB Micro wave installed in Motor home.When i plugged in motor home (110), display on micro. lite up, set clock, after about 5 minutes tone alarm came on and display showed "E2" . nothing works on display panel. Have to unplug to shut off tone. when plugged back in does same thing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 9,047 Answers

This model was one of many subject to a recall due to defective membrane keypads.

Details of the recall are here: http://www.allworldauto.com/recalls/NHTSA_03E044000__SAMSUNG_MICROWAVE_MR6699GB_recall_55168.html

Long story short, please unplug it and contact Samsung with you model and serial number at 800-932-3837.

If your serial number was not one subject to a recall, E2 usually means a temperature sensor problem but it may also mean you have a bad door switch.

If it's not in the recall, please post back and I can give you info on checking the other parts.

We're happy to help and we appreciate your thoughtful rating of our answer.

Posted on Feb 17, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My MMV5165BAW displays *** with micro, AM/PM, help..etc under each x. Display flashes this msg. Touch pad will not work, but when it displays to set the clock, touch pad will work. After setting clock


There may be grease or moisture on the the control circuit board, especially in the are where the keypad strip plugs into the board.

Or there may be a pad stuck on th keypad.

See the owner's manual here in case that might help you.

Otherwise, the controller assembly may need repair, which is usually economical.

Jan 30, 2013 | Maytag MMV5165 Microwave Oven

1 Answer

Setting the clock on frigidaire micro wave


You can download Frigidaire owner's manuals and installation instructions here.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 03, 2011 | Microwave Ovens

1 Answer

Try2910227 serial ywmh2205xvb-0 model arcing on the back corner were the rack sits.Is there a way to repair this seen is the unit was purchaced in June of 2011.


Yes, take the rack out and recycle it. I do not know why these micro-wave company put racks in the micro wave ovens. You get some insulation on the inside the micro flaking off next the rack.


The mega-tron tube is a very high energy transmitter. The energy will come out of the top inside the micro wave oven in a wave guide. Micro wave energy that generation by the tube is high frequency into Gega Hertz. You have a metal tray in side the micro wave acts like a big capacitor it stores energy in form of heat the next you know it look like Marconi is putting on a lighting display.



Leave the wire tie on a loft of bread and put in you micro wave oven to defrost. The next thing you might see is a load bread burning, instant toast. ----The use of micro wave were invented by the British before WWII. The mega tron tube generation very high frequency radio wave and these wave struck an object 100 miles away some of this beam energy would balance back to a receiver-----You have Radar.... I wish you and your family well being and be careful of micro wave ovens it can burn from inside out. GB you...stewbison

Aug 22, 2011 | Microwave Ovens

1 Answer

When power went off and then came back on, screen on micro wave continually shows demo and I cannot set time


The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If that doesn't work, leave it unplugged for about 5 minutes and try again.

If it still won't work, then you may have a bad membrane keypad / DP circuit.

If your model is NN-P295SF, the service is here.

Parts can be ordered from Encompass here.

Aug 19, 2011 | Panasonic NN-P295SF Microwave Oven

1 Answer

How do i set the clock on my hinari life style micro wave mx698tcss


Usually one must press the cancel/stop button before setting the time by pressing the clock button and pressing hour/minute buttons and then clock again to memorise it.

Jan 19, 2011 | Microwave Ovens

1 Answer

Amana aco 1840 over stove micro wave. heating not working .


FIK IT THE HEATING ELEMENT IS STRIGHT FORWORD AND COST IS CHEAP, GO FOR IT .

Oct 24, 2009 | Amana ACM1580 Convection Microwave Oven

1 Answer

Micro wave runs at 10ths of seconds instead of seconds


The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If that doesn't work, leave it unplugged for about 5 minutes.

Let us know if you still need help, otherwise...

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jul 16, 2009 | GE Profile Spacemaker Over-the-Range...

2 Answers

I cannot set the clock on my LG MS1949G Micro wave


After spending 25 minutes on hold while LG try to find out how their own product sets the clock, I now know that the LG MS1949G Microwave open does NOT have the ability to set a clock that shows the time of day.

Jul 11, 2009 | LG LTM9000 Microwave Oven

1 Answer

Kenmore Microwave Problem


"d" may mean demo mode.

The first thing to try is a "hard reset". Unplug it from the power line for a few minutes, plug it back in, set the clock, then try again.

Let us know if the hard reset doen't fix it.

Oct 13, 2007 | Microwave Ovens

Not finding what you are looking for?
Microwave Ovens Logo

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Samsung Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...