- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Put your bluetooth on your phone.. On the supertooth is a green button..press and hold to turn on for around 5 secs and watch for red and blue lights to flash..its pairing mode..now activate phone discoverable. .and pair..enjoy
By pairing your KU990 and another device, you can set up a passcode protected connection. This means your pairing is more secure. 1 Check your Bluetooth is On and Visible. You can change your visibility in the Settings menu. 2 Touch Paired Devices then New. 3 Your KU990 will search for devices. When the search is completed Refresh and Add will appear on screen. 4 Choose the device you want to pair with and enter the passcode then touch OK. 5 Your phone will then connect to the other device, on which you should enter the same passcode. 6 You passcode protected Bluetooth connection is now ready.
Using a Bluetooth headset 1 Check your Bluetooth is On and Visible. 2 Follow the instructions that came with your headset to place your headset in pairing mode and pair your devices. 3 Touch Yes to Connect now. Your KU990 will automatically switch to Headset profile.
If you have any questions you can try reading the manual here http://www.in.lge.com/Product/Manual/KU990.pdf
Factory Setting is usually 0000. In order to pair with your mobile (Max 8 phones), Depress green button on ST ONE R57 for 5 seconds approx. Light will flash red & blue, indicating that device is in pairing mode. Phone should have "Bluetooth" switched on (in settings) and search mode activated. Good luck
In my earlier attemts, the H505 headset was probably never in "pair" mode although I was seeing a steady blue light or if it was, it was trasmitting previous Motorola Razor profile to which it was paired to. Once I found on Motorola website that other similar Motorola headsets (without power switch) can be reset by holding the two volume buttons and call button simultaneously for 10 seconds, I did reset the headset and there after my pairing attempt was successful..i.e. it stopped and asked me the passcode before throwing security error. Thanks for your support thought!
In order to 'pair' one Bluetooth device to another, a passcode has to be exchanged between the two devices. When you first connect, one machine will ask you to enter a passcode... enter any 4 digit number. The other device will then ask you for a passcode. Enter the same 4 digit number. It doesn't matter what the passcode is, as long as you enter the same number at both ends.
sometimes as default the code is 1111 ,1234,9999,5555 so you need to try them you can try them as many times as you want .