Question about Uniden BC350C Base Scanner

2 Answers

Programming a Scanner

The scanner is a Uniden SCANNER and we cannot prgram it because thereare no directions that came with it .HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Posted by on

  • 4 more comments 
  • Anonymous Feb 27, 2008


  • fish_22 Aug 09, 2008

    how do i program Tandy realistic PRO-30 VHF/UHF Scanner

  • Anonymous Dec 19, 2008

    i cannot open a pdf file is there any other way?

  • mac38-dont-k Dec 25, 2008

    I have a UnidenBc350c scanner cant program.

  • davidellswor Dec 27, 2008

    I have a uniden bearcat bc350c scanner. I do not know how to program it. Can you tell me how to program the codes that I have into it?

  • bluiu Jan 10, 2009

    I am trying to program this uniden scanner and i have no manual-can you help?


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you program the bc350c. I didn't get papers with it . I bought the display off the shelf & I don't have a clue how to program it. THANKS for any help...............RICH

Posted on Dec 24, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 204 Answers

Hey Emkat, here is a link to your owners manual, all you have to do is download it and print it. The programming starts on pg 24.
If you need freq's to put in it, go here;
Just click on your country, state, county and it'll list all the freq's for you. I hope this helps you out in your search, let us know; Mechanic

Posted on Feb 17, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Cannot find the manual, how to prgram this one..................

You can download and print the complete factory manual for your scanner, at no cost, here:

Bill B.
Listening in since the 60's

Mar 01, 2011 | Uniden BC60XLT-1 Handheld Scanner

1 Answer


Your best course is to follow the simple instructions in the factory manual that you can download and print, at no cost, here:

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:

Bill B.
Listening in since the 60's

Dec 27, 2010 | Uniden BC72XLT Handheld Scanner

1 Answer

I have a Bearcat Scanner (Uniden Bearcat BC145X) how do I set up the chainals

The BC350 is a pre-programmed scanner. You cannot program it in the usual manner (direct keyboard entry of each frequency), but you can transfer displayed frequencies in the SCAN or SEARCH mode to a PRIVATE bank. Detailed instructions for operating your scanner are in the factory manual which you can download and print, at no cost, here:

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:

Bill B.
Listening in since the 60's

Dec 10, 2010 | Uniden BC350C Base Scanner

2 Answers

How do i program my uniden bc60xlt scanner

I found the manual on line and followed the directions

Jan 04, 2010 | Uniden BC60XLT Handheld Scanner

1 Answer

I need to program the scanner

Here's your manual, they have easy to understand directions on programming. Hope this helps.

Sep 26, 2009 | Uniden BC248CLT Base Scanner

1 Answer

How to program a bc 560xlt bearcat scanner. Thanks, Les.

hello there: here is a link for you that will help out ok
best regards mike

How to Program a Uniden Bearcat Scanner BC 140 | How to Program a Uniden Bearcat Scanner BC 140. Programming a Uniden Bearcat ... How to Program a Bearcat 5 Scanner. How to Program a BC 560XLT Scanner ... - 57k -

Aug 24, 2009 | Office Equipment & Supplies

2 Answers

Cant program frequencies into my uniden bc72xlt scanner

Just to verify you are trying to program frequencies the scanner is able to receive.
This unit is limited to the following freq range.
50.0-54.0 5
148.0-174.0 5
470.0-512.0 6.25

If the frequencies your are trying to enter or outside these bands you will get a error.

Next Direct Entry Mode Programming
Press Func. + PGM
Press E to enter ch in current location
To change location pres func + Up ^ or down key to choose location then press E
Enter your freq then press E

Hope this helps.

Jul 21, 2009 | Uniden BC72XLT Handheld Scanner

1 Answer

Uniden UBC72XLT scanner problem.

The cheapest solution would be to directly program the frequencies that are available in your area, usually this is public information with the exception of high security channels, you can call each location and ask them what frequency they broadcast

Jun 06, 2009 | Uniden BC72XLT Handheld Scanner

2 Answers

Uniden bc147xlt frequncy guides

Go to this site, it has frequencies for cities and counties around the US. This is a link directly for CA. Just click on your area.

Rollin CBs

Nov 26, 2008 | Uniden BC244CLT Base Scanner

Not finding what you are looking for?
Uniden BC350C Base Scanner Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts


Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers


Level 2 Expert

509 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides