Question about Mitsubishi VS-50607 50" Rear Projection Television

1 Answer

Mitsubishi 5o in

I have amitsubishi 50 in projestion tv at first the screen jumped a little then
it got black at hte top with3 thin lines red blue and green now it works some times then it goes black if i unplug it and let it set a while it will work for a few minites again

Posted by on

  • tcd1603 Mar 05, 2008

    My Mitsubishi VS-50607 now only has thin green, blue and red horizontal pin-stripe lines across the middle. Nothing else. No menus come up, no sound, nothing but the thin three lines.

    Any solutions out there?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Convergence amp ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
http://www.hdtvoice.com/voice/showthread.php?t=28929
Or send to ptscorp.com
http://www.hdtvoice.com/voice/index.php?s=

Posted on Feb 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 3 thin lines red, green,blue at the top of the screen, from side to side and slightly arched. I tried the convergence, but it didn't help. Is this a costly repair or can it be done myself?


It is alignment problem & needs lot of patience, expertise to align LCD panels. To align slightly loosen the screws on red & blue panels. Switch on the TV with input source as computer as it has steady graphics. Align for red & blue by slightest movement using light taps with screwdriver sideways. When you are satisfied, tighten the screws. If it is one pixel height line, just neglect it. That much error can be expected.
WARNING: If you are not sure, do not carry out the alignment. Otherwise it will go more out of alignment.

sonsunny

Jun 14, 2011 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Red and blue streaks across the screen top and bottom


The Convergence Amp IC's are bad. You should call a good TV Tech for this repair.

Jul 11, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Mitsubishi WT-42413 Blue Green and Red Line


there is a section in the tv working just to keep the screen fitting top to down (vertical section) some capacitors are dry now in that area. this one has not to be a expensive job in the workshop. Try estimates

Apr 14, 2009 | Mitsubishi WT-42413 42" Rear Projection...

1 Answer

Mitsubishi VS50805 Serial # 102718 No red in picture


Replace the convergence ICs your model uses two STK392-040 Convergence ICs. You can get replacements at the following link with instructions.
http://servicemanuals.vstore.ca/

Dec 28, 2008 | Mitsubishi VS-50605 50" Rear Projection...

2 Answers

Many thin black horizontal lines on my Hitachi Ultravision 50" TV


Good Day, LDS also;
You may have a poor seated cable connector. Unplug TV from A/C, remove back look for a large black connector. It connects between the Main Digital Module and the Drive PWB. Re-insert both ends several times to make better contact, use contact cleaner if have but not always needed. Good Luck, big IRISH.

Jul 21, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Mitsubishi VS-60705 Large Screen Projection


thanks for your detailed description of what happened.
replacing the vertical output i.c will correct the problem.
the reason it failed was bad connections on it.

Apr 22, 2008 | Mitsubishi VS-45605 50" Rear Projection...

1 Answer

Sound no picture


Try resoldering the vertical output IC this is acommon problem with this model

Mar 20, 2008 | Mitsubishi VS-5043 50" Rear Projection...

1 Answer

1997 Toshiba 50 inch tv


Sounds as though you have a filter capacitor bad in the power supply. I strongly suggest you have it checked and repaired soon, before it burns up a transistor or regulator. The cost may be a bit high now, but will escalate to possibly a complete power supply board. If you can repair your own set, check the main power supply filter capacitors. Good luck. I hope this has helped.
Ed
NC Electronics
Mills, Wyoming

Feb 18, 2008 | Toshiba TP50G50 50" Rear Projection...

1 Answer

Mitsubishi VS-60111 picture distorted


how do I manually switch my t.v. from 480i to 1080i on dtv with remote.

Dec 31, 2007 | Mitsubishi VS-70707 70" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-50607 50" Rear Projection Television Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1198 Answers

The Knight
The Knight

Level 3 Expert

69878 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...