Curtis speaker system in a box its a Htib 1000 5.1 ch speakers only with subwoffer that every thing hooks in to
I just need a manual for this system to find the best way to hook it up to all my things please email at firstname.lastname@example.org
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can't hook it up to your preamp. If the sub has speaker level inputs you would use them to hook it up to your amp speaker terminals. The left positive and negative goes to the corresponding left positive and negative at the amplifier and the same for the right channel.
i didnt tell you how to connect your subwoofer to your tv,i told you how to connect the audio unit to your tv,the 5 speakers AND the subwoofer connect to the surround sound audio unit,you DO NOT CONNECT SPEAKERS DIRECTLY TO TV.,
As long as your television and system both have (audio/out jacks from tv, audio/in to system) and cables it should hook up. Not real sure what you mean about directions for the remote, the system I have didn't come with directions just starts working as soon as the system is hooked up. Hope it helps
Hello Fernado I thinks that you are looking for a four digit universal remote setup codes with your Home Theater In a Box [HTIB]. If so try with this code. 0974 This is the only one four digit setup code for Panasonic. OK.
check the impedence of your speaker. if it is 8 ohm and your system is only 4 ohm then your speak is too strong for your system and it will be quiet. if this is a subwoffer check the settings on your system and ensure the subwoofer is not set down as this is seperate to the master volume.
speakers are suitable to any amplifier, exept for the rating of it. (wattage) sometimes there are some speakers that are voltage needed. well you can use it as a subwoofer output for your tv for better sound.
just buy a aux splitter for the two amplifier, so that you could use them both.
hope I helped you for this.. have funn.^^
you will need to put special glue which usally you can get from the stero store or radio shack. If you can not find it you need to get some of the foam glue from home depot and use as liitle as possible
You have the M-Audio BX8A speaker listed here. Is this what you have? If so, this is a powered speaker and therefor no need for an amplifier. If you want to use it as part of your 5.1 home theater system, it is not possible to power other speakers with this particular speaker, as it does not have the required output connections.