Question about Lexmark P4350 All-In-One InkJet Printer

2 Answers

Error 2200 i cleaned my lexmark p4350 printer,when i switch it on again,a error on printer screen comes up error 2200 consult user guide,but i dont have one anymore

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 41 Answers

Error 2200 is a scanner stall error.. there are a couple things for you to try to fix it:

Power off the AIO and remove the power supply from the back of the unit.
Open the scanner cover. Check the scanner glass for cracks and the scanner casing for cracks. Close the scanner lid.
Open the top cover of the AIO.
Using the carrier belt, move the cartridge carrier to the middle of the unit.
Remove both cartridges, close the top cover, reinsert the power supply, and power the AIO on.
IF THE ERROR MESSAGE DID NOT COME BACK....
Power off the AIO and remove the power supply from the back of the unit.
Open the top cover of the AIO.
Using the carrier belt, move the cartridge carrier to the middle of the unit.
INSERT THE COLOR CARTRIDGE ONLY,
Close the top cover, reinsert the power supply, and power on the AIO.
IF THE ERROR MESSAGE RETURNS.. GET A DIFFERENT COLOR CARTRIDGE AND REPEAT THIS PROCESS....
IF THE ERROR MESSAGE IS GONE,
Power down as before, do all the same to get the carrier to the middle of the unit and RE-INSTALL THE BLACK CARTRIDGE.
Power back up as in previous steps...
NO ERROR? SHOULD BE GOOD TO GO..
ERROR?? TRY DIFFERENT BLACK
If after trying all of the above and the error message does not go away, you unit would need serviced (if it's under warranty, it's worth it; if not, you might want to replace it.)

Maggie B

Posted on Feb 21, 2008

I had the same problem, i just push the select buttom when the error come, and work. the problem come from the scanner motor. well i fixed mine like that.

Posted on Mar 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to scan Lexmark P4350


Please refer to the Lexmark P4350 User's Guide from the Lexmark website. The user's guide should give you more detailed instructions on how to scan using your model.
I hope this helps.

Mar 08, 2012 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

Halfway through sending a fax I got an 'error 2200 - conslut your user guide' nessage'. Is there a user guide online or can you help me?


The 2200 error message indicates that the scanner has stalled. Please refer to this article in the Lexmark website to determine and resolve the problem: 2200 Error on the Lexmark X7100 Series All-In-One.

May 03, 2011 | Lexmark X7170 All-In-One InkJet Printer

1 Answer

What is error 2200 why is scanner making noise?


The 2200 error indicates the scanner has stalled. Please refer to this article on 2200 Error on the Lexmark P4300 Series All-In-One. Hope this helps. Thanks.

Jan 17, 2011 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

We have a lexmark p4350. we cant get it to print


The error indicates an error in communication either between cartridges or the cartridges and the printer. Here's an article in the Lexmark website on 1203 Error Message on the Lexmark P4350 / P4330 Photo All-In-One. Just click on this link: http://bit.ly/9sK9hE. This should guide you on what to do.

Jul 05, 2010 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

Lexmark printer problem. Printer is not printing shows error 1203


Hi
Error 1203 Dell 962
There can only try and I hope it will do the job for you.

Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on
press copy

you may need to Reset Factory Defaults

Mar 01, 2010 | Lexmark P4350 All-In-One InkJet Printer

2 Answers

Lexmark P6250 Printer error 1203 - Consult User Guide


It is a hardware printing problem . Try to clean contacts in printers in cartridge holder by alcogol and elastic rubber. it may become dirty an poor contact. after this you can try this:
Put some layers of the sticky tape on cartridge to improove force of contact.
ad5c564.jpg

Mar 06, 2009 | Lexmark P6250 All-In-One InkJet Photo...

1 Answer

Error 2200


Step Action
1 Power off the printer and remove the power supply from the back of the unit. Wait 30 seconds. Then reinsert the power supply and power the printer on.

Did the error message return?

Yes: Continue to step 2.
No: Attempt a test scan. If the error message does not reappear, the error is resolved.

2 Power off the printer and remove the power supply from the back of the unit. Open the scanner cover. Check the scanner glass for cracks and the scanner casing for cracks. Close the scanner lid. Open the top cover of the printer. Using the carrier belt, move the cartridge carrier to the middle of the unit. Remove both cartridges, close the top cover, reinsert the power supply, and power the printer on.

Did the error message return?

Yes: Continue to Contacting Lexmark.
No: Continue to step 3.

3 Power off the printer and remove the power supply from the back of the unit. Open the top cover of the printer. Using the carrier belt, move the cartridge carrier to the middle of the unit. Insert the color cartridge, close the top cover, reinsert the power supply, and power on the printer.

Did the error message return?

Yes: Repeat step 3 with another color cartridge. If the printer fails again, continue to step 4.
No: Repeat step 3 and install the black/photo cartridge. If both cartridges are installed, attempt a test scan. If the error message does not reappear, the error is resolved.

4 Power off the printer and remove the power supply from the back of the unit. Open the top cover of the printer. Using the carrier belt, move the cartridge carrier to the middle of the unit. Remove the color cartridge and insert the black/photo cartridge. Then close the top cover, reinsert the power supply, and power the printer on.

Did the error message return?

Yes: Repeat step 4 with another black/photo cartridge. If the printer fails again, continue to Contacting Lexmark.
No: Install the color cartridge. If the printer fails, continue to Contacting Lexmark. If the error message does not appear with both cartridges installed, attempt a test scan. If the error message does not reappear, the error is resolved.

Sep 16, 2008 | Lexmark P4350 All-In-One InkJet Printer

2 Answers

Cartridge error


i have a lexmark p4350 and just recently got a eror message 1102, says consult user guide, cannot find that error message in the guide, what is it, thanks

Sep 10, 2008 | Lexmark P4350 All-In-One InkJet Printer

2 Answers

Lexmark p6210


I have an error 2200, how do I solve it? please help

Apr 06, 2007 | Lexmark P6250 All-In-One InkJet Photo...

Not finding what you are looking for?
Lexmark P4350 All-In-One InkJet Printer Logo

883 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...