Question about Projection Televisions

2 Answers

Looking to buy part# TS-CL11OU. Looking for a JVC service center in my area. I live in Oxon Hill, MD 20745

Posted by on

  • daphnegumba Oct 18, 2008

    I live in Medina, Ohio, and need to buy replacement lamp for my tv. Part #TS-CL11OU. You can respond to daphnegumba@verizon.net. Thanks

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

There are no registered JVC service centers in your area for a rear projection HD. The closest one it shows is Cypress, CA...which isn't a lot of help for you.

I found this part on several websites as well as Ebay and JVCs website.

This website had it for about $160.
http://www.discount-merchant.com/JVC-LCD-Projection-TV-Lamp-TS-CL110UAA-TS-CL110U-p/
jvc-ts-cl110uaa-new.htm&Click=98

I also found a website that had a great "How To" with steps on replacing it once you get the bulb.
http://fixyourdlp.com/blog/?p=10

Good luck!

Posted on Feb 12, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

I've found a great place to get dlp lamps is online. The one place I usually recommend to people is dlplamps.com. Here is the TS CL110UAA.

Posted on Apr 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a JVC AV-32850 TV that just stopped working. It was on and then went blank. The red LED ON Timer now flashes on and off, and sometimes there is a clicking sound. I checked the outlet, and it is...


How many times does the light flash or for how long does it flash? Are you trying to service this yourself? or open to the suggestion it may need servicing? How long ago did you purchase the unit?
Thanks,
lee

Jul 01, 2008 | JVC Projection Televisions

1 Answer

NO AUDIO Mitsubishi TV Model WD65737


Sounds like the audio circuit portion of your tv went out. You could ask Mitsubishi for a list of authorized Mitsubishi service centers in your area. It may be expensive to have it shipped, but it might be cheaper than buying another one.

Dec 12, 2011 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

I replaced the digital board on my TV JVC 56g787, and now my screen is yello and blue,and it also says it has no program how do i reprogram it thks


Well, you should have downloaded all values from the old board to copy them to the new board. You are looking at a full scale alignment now. Your only recourse is to call an Authorized JVC service center to align it.

May 07, 2011 | JVC HD-56G787 Television

1 Answer

All of a sudden, last evening while watching, I got colored shadows around the images, like watching 3d without the glasses. Trying "convergence" I am only able to align the center...


hello spititttome!
seems like one of the color tubes is worn out, it has to be replaced. contact your local service, and let them tell you before repairing how much it will cost. so you can decide to repair or buy a new one,
regards

Feb 27, 2011 | Mitsubishi TS-50611 50" Rear Projection...

1 Answer

My colors are blurry


Hi! your convergence board has gone bad. DIY only if you have background knowledge and some desoldering and soldering skilla. best call a professional. should cost between 220 to 320 depending on model and the area you live in. takes about 2 hours. Repair kits are available but could prove difficult DIY project. Thanks if youvote and got what you were looking for. ts a common problem with old tvs.

Apr 12, 2010 | RCA HD52W59 HDTV Projection Television

1 Answer

TV was on and had a picture, and then nothing w/flashing power


Your lamp has blown. Time to get a new one.

the hyperlink button doesn't seem to be working, but just copy and paste this link into your browser. It is linked directly to your tv's replacement bulb.

http://www.discount-merchant.com/JVC-LCD-Projection-TV-Lamp-TS-CL110UAA-TS-CL110U-p/jvc-ts-cl110uaa-hd-56fn97.htm

Nov 11, 2009 | JVC HD-56FN97 56" Television

1 Answer

Lamp for JVC HDTV model HD-56ZR7U


It takes the TS-CL110UAA LAMP.

Aug 18, 2009 | Projection Televisions

2 Answers

TV turned off by itself and now it won't turn back on


It sounds like the projector lamp being burned through

JVC TS-CL110UAA Multimedia Projector Replacement Lamps

not a cheap fix take the light out and if you can measure the resistance.
If it is infinit it is broken.
you can look on line where to buy them.
Good luck

Apr 28, 2008 | JVC AV-56P575 56" Rear Projection...

2 Answers

JVC tv AV-27D304


Roger, if your contrast (sometimes called picture) and brightness controls are at max you can increase the tubes brightness by turning the "screen control" clockwise, be advised a little turn goes a long ways, don`t crank it too far or you will get retrace lines, you will have to remove the back from the set and follow the red wire down from the tube to the "flyback transformer" on the front of the flyback are 2 controls, focus and screen, do not move the focus control, this should fix your problem.

Nov 20, 2007 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

905 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...