Question about SanDisk Sansa c140 MP3 Player

2 Answers

Asking soft ware

When i am connecting this sansa c140 adiing new hardware installation field is coming ,i hav no driver disk

Posted by on

  • 3 more comments 
  • aravindcp Feb 12, 2008

    when i am connecting this sansa c140 adiing new hardware installation field is coming ,i hav no driver disk

  • aravindcp Feb 12, 2008

    poda mira

  • rajaundru Feb 13, 2008

    aaa

  • Anonymous Apr 16, 2009

    no, im having the same problem. it powers and all, just theres no usb option in the settings, so when u connect it to sp3 xp, it just reads as a usb device, as to read the media card or something. the actual player never shows. i have the drivers with the sandisk connect tool. but it dosent seem to allow them to be installed to the player. im left with a player that cannot connect to windows, even doing the reset thing where u hold record, dosent work...

  • Jean Sintulaire May 11, 2010

    what version of windows are you running?

    What version of windows media player?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 758 Answers

Update your windows media player to version 11 and you will have the driver...

Posted on Feb 14, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Http://www.sandisk.com/Retail/DriverDownloads.aspx

Posted on Feb 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you take music off your mp3 player


Hello,

The Sansa c140 can be operated in MSC and MTP mode for transferring and deleting music files.
See also setting USB mode for autodetect or MSC mode on page 16 of the manual: link to the Sansa c100 series manual.

  • For deleting files a connection to a computer has to be made in either MSC or MTP mode, see page 10 of the manual.

MSC mode means that a computer will see the player as a removable disk when connected.
It's like exploring the computer detecting the player as an external memory, showing up as a drive letter with about 1 GB of memory.
Before disconnecting the player, always safely remove hardware, the icon in the bottom taskbar on the right.

MTP mode means that a computer has software installed like Windows Media Player 10 and in this software, when started, the player is being recognized as Sansa c140.
Before disconnecting the player, wait for the message that it is allowed to disconnect the device.

How to use Windows Media Player 10 ? See the site of Microsoft:
http://www.microsoft.com/windows/windowsmedia/player/10/using.aspx

Need more help ? Just post a comment.

Dec 27, 2009 | SanDisk Sansa c140 MP3 Player

1 Answer

Sansa c140


Download this file:
http://www.sendspace.com/file/0mc3km

This is the firmware update utility for Sanca c140 (c100 series) devices.

There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.


1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.

Jul 03, 2008 | SanDisk Sansa c140 MP3 Player

3 Answers

Problem in C140 SANDISK


I am from India too ;)

Updating the firmware will return your device to factory setting, like new. It should work normally after that.

Download this file:
http://www.sendspace.com/file/0mc3km

This is the firmware update utility for Sanca c140 (c100 series) devices.

There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.


1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.

Jun 18, 2008 | SanDisk Sansa c140 MP3 Player

1 Answer

Soft ware


Download the latest firmware to reacquire the software, or reinstall the software from Sandisk's website.

These are the most common methods for recovering Sandisk's Sansa Mp3 Players. I have been almost universally successful in recovering Sansa players using one or a combination of these methods. These methods do not work if you are having synchronization or music format issues - they are for recovering a player that will not power up, freezes, flashes, is not recognized by the computer, and a host of other issues.

Reset the Sansa Player first. On most models, restart is done by holding the power button in for 15 seconds or longer. Check your specific manual to be sure. The manuals are available from the Sansa website if they have been misplaced.
Download the Sansa Recovery Tool from the Sansa website.
Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
Firmware Upgrade- Erases Everything: Get the latest firmware upgrade from Sansa - it updates the firmware and erases every song in the player all at once. Note: this method doesn't work if already have the latest firmware. Go to this website and click "Firmware Updater" to find out: http://www.sandisk.com/DriverDownload/driverList.asp
If these fail, then:
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
If you get the problem where MTP Device keeps popping up continuously, uninstall the “MTP Device” by going to Start à Control Panel àSystem à Hardware à Device Manager (you computer may vary slightly, depending on Windows Version).
You may have to restart your computer after each of these methods to get them to work properly. Disconnect your Sansa player BEFORE shutting down your computer.
-Tha Mp3 Doctor

May 21, 2008 | SanDisk Sansa c140 MP3 Player

1 Answer

I have same problem of ur C 140 sandisk


my sansa would not come on and everytime i connect it to the computer it says found new hardware..and i have to install some software.

Mar 11, 2008 | SanDisk Sansa c140 MP3 Player

2 Answers

My Sandisk Sansa C140 only display sandisk logo


You can update the firmware. This will return your device to factory settings and fix any internal errors. All your current content will be deleted.

Download this file:
http://www.sendspace.com/file/0mc3km

This is the firmware update utility for Sanca c140 (c100 series) devices.

There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.


1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.

Jan 24, 2008 | SanDisk Sansa c140 MP3 Player

1 Answer

Pop-ups


Download this file:
http://www.sendspace.com/file/0mc3km

This is the firmware update utility for Sanca c140 (c100 series) devices.

There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.


1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.

Jan 21, 2008 | SanDisk Sansa c140 MP3 Player

1 Answer

Mp3 sansa c140 frozen


1. Download the c100_1.0.005a_FirmwareUtility file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer.
6. If the New Hardware Wizard appears, do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose your language prompted.
12. Check if the issue is resolved.

Nov 17, 2007 | SanDisk Sansa c140 MP3 Player

Not finding what you are looking for?
SanDisk Sansa c140 MP3 Player Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk MP3 & Digital Media Players Experts

kakima

Level 3 Expert

96593 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a SanDisk MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...