Question about Syntax SV266M Motherboard

1 Answer

Syntax k7sv266ad motherboard video card installation

I have been trying to install a dual monitor video card ATI Radeon 2600 pro to this mother board. I have installed net frameworks2.0 and also windows access 3.0 to the computer. But When its time to install the Radeon software, I get a pop up that say "can not locate or find drivers for your hardware or operating system. What are the possibilities I try the2400 and envideo card and got the same results....What im i doing wrong or what do i need to do. My name Chris E Mail jeminii3641@yahoo.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

Hey, It seems you have downloaded the wrong driver package. There are difrent drivers for eatch type of card. Ati radeon 9700, ati radeon 2600 pro, ati radeon 2400. All have difrent drivers and you need to download the correct ones.

Please use this page and select the correct ones for you:
http://ati.amd.com/support/driver.html

Posted on Feb 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nvidia geforce g210


1.5.1 Graphics Subsystem
The board contains two separate, mutually exclusive graphics options. Either the integrated
graphics processor (contained within the ATI Radeon Xpress 200 Northbridge) is used, or a PCI
Express x16 add-in card can be used. When a PCI Express x16 add-in card is installed, the ATI
Radeon Xpress 200 Northbridge graphics controller is disabled.


http://downloadmirror.intel.com/15113/eng/D101GGC_TechProdSpec.pdf

Mar 06, 2014 | Intel Motherboards

1 Answer

I purchased a M4A89GTD PRO/USB3 motherboard and I am getting ready to purchase a video card. The video card that I was looking at has me puzzled. The two links below are to Tiger Direct and Newegg. I...


Originally the ATI Radeon HD 5770 is a PCI-E 2.1 compatible chip and so is the Asus board - mislabelled on TD. It will work just fine in an 2.0 board, the management capabilities of 2.1 will simply be ignored.

Jun 11, 2010 | ASUS M4A89GTD PROUSB3 Desktop Board AMD...

1 Answer

Computer Does not work correctly with Radeon 9250 Graphics Card


Hmm? Everything except replacing the motherboard, sometimes it does not get any better, but...go into your BIOS and turn off the Gateway splash screen. It will be an option in maybe the first or second menu choice. Make sure your on board video device is disabled and save your options when exiting. Good luck and let me know how it turns out.

Jul 02, 2009 | MSI MS-5185 Motherboard

2 Answers

Can we use a internal graphic card in a mother board in another m


Yes if it has the port for the graphics card it will work with the onboard graphics card just make sure then that your video output is plugged into the ATI radeon and not the onboard..or it will not work correctly. if you have anymore questions just let me know and i will answer them asap.

Apr 10, 2009 | Motherboards

1 Answer

With ASUS M2N-MX mainboard, ATI Radeon 7000 Series problem.


Your Motherboard has an onboard video chipset made by Nvidia. Nvidia and ATI have a history of not playing nice with each other.

I have 2 possible solutions for you.

1.) Remove the Radeon card and use the Nvidia onboard card (Essentially a Geforce 6100)

2.) Enter the bios (Usually done by hitting <Delete> or <F12> while the computer is booting up) Your Motherboards manual can tell you for certain. Then find the options for onboard video and disable it.

Then boot up the PC, When it say starting Windows press <F8> to bring up the windows boot menu. Select "Start in Safe mode" Once this loads up open the device manager, look under "Display adapters" find the entry for the Nvidia adapter, right click on it and select either "Uninstall" or "Disable this device"

Which you choose depends on your personal preference Whether you like Nvidia or ATI boards better.

If it makes your decision easier a Geforce 6100 is roughly equivalent to a Radeon 8500 in performance.

I hope this helps
Dave

Nov 11, 2008 | ASUS M2N-MX Motherboard

3 Answers

Video card installation


Hi Vigilante - Please don't rate this 'til it's fixed. Have you disabled the onboard video in the BIOS?

Jeff

Jun 05, 2008 | Biostar P4M80-M4 Motherboard

1 Answer

Have a ATI 9550 video board cant instal it wont recognize it


the drivers for ati radeon 9550 are

https://a248.e.akamai.net/f/674/9206/0/
www2.ati.com/gamesite/8-2_xp32_dd_58128.exe

download the file and install it. you video card should be working after installing this and rebooting. i am assuming you have windows xp

Feb 24, 2008 | EliteGroup KV2 Extreme Motherboard

1 Answer

Intel P$ 1.8 mhz on a D845HV/D845WN board


Before removing your current card swap video outputs on the PC. If currently connected to the VGA output switch to the HDMI connector AT the video card. Use the HDMI to VGA adapter that came with the video card. Check & see if the display loads Pc starts. Taking the information directly from your motherboard manual pg. 25, your AGP video can only run at, AGP supporting 1.5 V 4X AGP cards. The 9600pro runs at 8x & it is not backwards compatible. (able to run at either 8x or 4x). You could run the Sappire ATI Radeon 256MB 9550 DDR AGP 4x/8x 1.5volt card.
Here is one site: http://www.colordrives.com/sapphire-ati-radeon-9550-256mb-ddr-agp-4x-8x-video-card---retail-box.html
When you do get the video card be sure to set your bios AGP to the correct size as listed in your manual pg. 109 subsection 4.4.7
I hope this helped.

Feb 20, 2008 | Intel Motherboard

2 Answers

Video incompatibility?


The driver & Catalyst Control Center for the ATI Radeon 9600 Series is listed below for Win XP home & Pro. Lasted updated Jan-16-2008.
https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/gamesite/8-1_xp32_dd_ccc_wdm_enu_57717.exe
Your install will run better if you remove previous software versions for the Radeon 9600. If your attempt to remove old software fails. ownload & run ATI's cat-uninstaller.exe found here.:
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=1447

Jan 20, 2008 | Intel Motherboard

Not finding what you are looking for?
Syntax SV266M Motherboard Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Syntax Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you a Syntax Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...