Question about InFocus LP70+ Multimedia Projector

2 Answers

Projected image has a shadow in the corner

Hello InFocus -

Good morning.

The projected image from my projector has a shadow on it. . .and the shadow is being cast by something within the LP70+. It's a slender triangular shadow: It starts at a point about halfway down the right side of the screen and then widens towards the bottom of the projected image.

I'm not sure if this is a new phenom or if it has always been this way. I think it's new. But when I received my unit originally it arrived broken, so I had to get a replacement one. Maybe I just didn't notice in all the chaos of that time.

It's not the biggest deal in the world (it's not a big shadow) but now that I have noticed it. . . it bothers me. There must be some piece that can come loose and partially onscure the bulb or lens of whatever.

Any ideas? Let me know if you need a photo of the screen.

Dehan Glanz
Danno@Calthorpe.Com

Posted by on

  • Anonymous Feb 14, 2008

    Having the same problem with 3 of our 5 projectors.

  • Chez1962 Mar 08, 2008

    Hi, yeh I've got the same problem on two EPSON EMP-4's? It's a little annoying! Would love a solution.

    Chez

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

It sounds like a failure of the light tunnel.

Posted on Feb 28, 2008

  • sheridan1952 Feb 28, 2008

    Or it could be a mis-alignment on the mirror.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 202 Answers

Most probably a water mark symbol...kind of thing(bcos of the comment by one guest, stating occurance of the problem commonly), why don't u write to the support for projetcor?

Also, if not within warranty, please do check for any dirt / paper tag / breakage of glass (are u sure they have replaced the unit, during the complaint for trans error)


bye

was his helpful?

Have a nice day

Posted on Feb 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My unit seems to work fine, except there is a dark shadow covering the right third of the projected image. Is this a sign that the bulb is going out?


this is the light tunnel needing to be adjusted or replaced because is has collasped due to the heat given off by the lamp during the life of the projector.

Aug 27, 2010 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

SHADOW IN THE BOTTOM RIGHT CORNER . tHE TECH TOLD ME THAT ONE OF THE MIRRORS IS OUT OF ALIGNMENT. cAN THIS BE FIXED?


Yes this can be fixed, but not as a DIY project. The adjustments require special test equipment and jigs. This unit requires a professional repair.

Dan

May 26, 2010 | InFocus IN72 Multimedia Projector

1 Answer

I have shadowing on the edges when in wide-screen. When in normal screen the image is fine. How do I get rid of the shadow? Also, is there a way to clean the mirror inside the unit?


the only way to properly and safely clean anything inside is with canned air. as for the shadow, replace the light tunnel. you can get the part from an infocus service center and replace it yourself, or send it in for repair. either way, try av solutions in ny. they're really good. www.avsolutionsny.com

Dec 25, 2009 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

Red shadow to left of main image InFocus LP750


You have to open the LP750 and check the alignment of your color lenses. You might be needed to adjust, also check your lamp too.

Jul 23, 2009 | InFocus LP 750 Multimedia Projector

1 Answer

Shadowing on lower right of screen on InFocus LP70+


the light tunnel (like a square tube of mirrors) is collapsing. it needs to be replaced, but it's a bit involved, so and infocus service center would be your best bet. if you wish to try it yourself, let me know.

Jul 14, 2009 | InFocus LP70+ Multimedia Projector

2 Answers

Looking for parts for infocus litepro 730


i have an infocus prolite 730. the image projected is not sync'd. so there are 'shadows'. does anyone know if this can be corrected?

Dec 03, 2008 | Multimedia Projectors

1 Answer

Colors showing red on screen


Hi Stella,
There is a button on the projector called "Auto Image"
Most people don't realize it's even there.
Press it while you are seeing this problem and most likely the projector will figure out the image issue and all will be well.
Note: this feature is nowhere in the menu(s)

Good Luck!

SagerTronics


Oct 29, 2008 | InFocus ScreenPlay 4805 Multimedia...

2 Answers

Shadow on right side of screen


check the connector of DMD module. Service all projector and reinstall.
Viren

Nov 18, 2007 | InFocus ScreenPlay 4805 Multimedia...

Not finding what you are looking for?
InFocus LP70+ Multimedia Projector Logo

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Multimedia Projectors Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you an InFocus Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...