Question about Projection Televisions

1 Answer

TV is ON....only ONE STATION. New Remote Batteries. Will Not CHG ch or VOLume

The 37" TV would not go on. I replaced batteries in remote. The TV comes on now, however, I cannot change ANY channels with the remote, OR go UP and DOWN with the VOLUME control. Recently, I must have pressed something, because I could only get a station when pressing the actual "number" in....rather tha pressing the "UP/DOWN" buttons. So...right now...TV IS on, but, I cannot change any channels OR move volume. Channel # does NOT come on TV nor does VOLUME "green" lines. It is "stuck on "ONE" station. PLEASE HELP??!! Thankyou so much. (By the way....I HAD pressed on some buttons on the right side of TV, when remote did NOT work. I wonder if I did something there? It is 11:33PM EST right now. PLEASE HELP?? Thankyou so much. SUE/Arlington, Ma. I am disabled, and TV is ALL I have to watch during the NIGHT. ANY "QUICK" answers?? Thankyou SO much.

Posted by on

  • ming29 Feb 12, 2008

    Thankyou so very much for trying....>I really appreciate it. It was a very good idea....but.....unfortunately, did not work.



    I called the company that has taken the OTHER company over, now...."MINTEK" has gone into BANKRUPTCY!!!! The other Comapny is called: Global Navigation...located in California.



    I was told by a TV repaoirman toady......NEVER BUY AN LCD TV.....they are "JUNK!!" They usually only last about 2-3 years! Not 20 years!! The cost for parts is HORRIBLE!



    In Feb. 2009....EVERYONE even with OLDER TV's can buy or rent a "box" to get HD tv! Yoiu do not have to BUY an HD TV!!!



    The Chinese Made ones, especially, he said, are made like "junk!"



    QVC SOLD THOUSANDS of "MINTEK" 37" LCD HDTV's. ALL of them will be defective at some point soon. The Main CIRCUIT PANEL in the TV is "FROZEN!" THAT is what the problem is....and QVC qill do NOTHING at ALL to help ANYONE with even getting the part needed for $135.00 from California!! Even though they no longer sell that particular TV.....and for good reason!!! They will NOT help at all, with ANY COSTS associated with the TV, because, even though it is 14 months old, only, they said they do NOT have to do anything...because the ONE YEAR WARRANTY is up! BUT...they advertised on their station that at the time....the TV would last for at LEAST, 20 YEARS!!! What a JOKE!!! They will not even "replace" it!!!



    Yes....I was surprised at QVC also....but, it's the truth!!



    Thankyou, again.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers

Unplug AC electrical cord for a bit then plug in and see if it resets.......................T.

Posted on Feb 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my remote won't turn volume up or down or turn rca tv off, new battery inserted.


Have you checked batteries are inserted correctly! Also is the remote set to operate the tv! Are any of the other remote functions working?

Oct 24, 2015 | RCA D56W20 56" Rear Projection Television

1 Answer

REMOTE NOT WORKING


Please remove the remote control's batteries, then press every button twice. Then install new batteries and press the [TV] button, then press the [POWER] button.

Mar 23, 2014 | Panasonic PT-56LCX16

1 Answer

I need a new remote for a WS-55313


If the tv was moved it may have a loose cable...you can get remotes for way less than that.

Mar 18, 2012 | Mitsubishi Projection Televisions

2 Answers

HOW DO I OPERATE THE TV WITHOUT USING THE REMOTE


Solutions: 1) on the side of the TV there should be buttons to operate functions such as volume or channel.
2) purchase a replacement remote
3) purchase an all in one / multi function remote, and program it using the codes provided in the manual

May 04, 2011 | Toshiba Projection Televisions

1 Answer

Remote works but tv does not respond to remote, will not adjust volume turn tv on or off etc. The remote came with the tv. 1999 60" tv


Surely you changed the batteries. If you have a camera,camcorder or even a camera phone point remote at the camera and press any button. you will see the ir led light up in the viewfinder or screen if remote is working. If not replace remote. If so tv remote reciver is bad.

Nov 24, 2009 | Projection Televisions

1 Answer

Remote does not turn tv on or off nor adjust volume anymore, new batteries mitsubishi model WS-65611


either the ir sensor on the tv is bad or the remote has been dropped too many times. you can take the remote to a tv shop. they have a little infra red detector card to check it with..good luck

Nov 15, 2009 | Projection Televisions

1 Answer

My RCA HDTV remote won't work with the regular tv. It was working fine last night until i pressed the tv botton and the volume button.


One thing you can try is to take the batteries out of the remote and then press every button on the remote, then replace the batteries. I have used this technique several times and it works. If that doesn't help try leaving the batteries out over night, this may reset the remote.

I hope this helps.
asnowman

Aug 01, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer

Volume & Menu screen flipping out


Replace all of your contact switches on front panel board power/off/on vol- vol+ ch- ch+.

Jan 05, 2009 | RCA HD52W66 Projection Television

1 Answer

I have an almost brand new LG LCD tv. the remote is now not working, it registers on the tv with the little light, but the channels wont change and the volume wont stay up.


try taking the batteries out then press every button. Install a fresh set of batteries and give it a try. If the remote still fails to function contact www.remotes.com

Oct 07, 2008 | Projection Televisions

1 Answer

JVC AV-48WP30 48 in. Rear... Problem:


Take the batteries out of the remote control. Press every button 2 times. Then re-insert the batteries. While doing this unplug the TV and hold the power button down for 30 seconds. Then let go and leave the TV unplugged for 3 min. Then turn tv on do a channel scan and then try yhe remote.

Jan 08, 2008 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...