My 5 disc changer has stopped working. Draw opens & only thing that
happens is the disc carousal spins, & spins. Door will not shut on
its' own & it doesn't matter if I load 5 disc in, the player
refuses to play. Sometimes the LCD says 6 disc, but it only holds 5. Is
there a reset button? Any sugesstions would help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Mine did the same thing. My player was primarily used in the garage and the cold weather may have caused my player to do the same thing. I just fixed my player. I removed the top cover and looked at the CD in the play position. In the upper right corner from the CD, you will see a spindle motor with a belt on it. Gently spin the motor back and forth carefully with your finger. I rotated it a half-spin in either direction, careful not to dislodge the belt. When I turned the player back on, the mechanism operated as it normally would and began playing the disc. I was able to eject and reinsert the magazine without any issues, solving the problem. Hopefully that will work for you.
im probbaly guessing that the motor that drives the draw has given up
and died what you could do is open it up and remove the motor from the
draw but still have it plugged into the board turn on the cd changed and
press the eject button and see if it spins without a load on it
hopefully there is a model number on the motor it that you might be able
to replace it with