Question about Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner

1 Answer

Downloading i cant download the driver, when I'm trying to print the screen flash this message "UN ABLE TO DETECT PRINTER INFORMATION" status monitor 3

Posted by on

  • 1 more comment 
  • Anonymous Mar 07, 2008

    not loadinng flash

  • Corner One Mar 24, 2008

    I cannot seem to download a valid driver for my lexmark t640 printer.

  • Raniel Diokno
    Raniel Diokno May 11, 2010

    It really depends on the printer. What printer are you pertaining to and what windows versiona re you using?

×

1 Answer

Aasdasd

Posted on Feb 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Amber light on oki c3300 continues to flash and printer will not print


Here's what the owner's manual has to say:

Error status (Amber, blinking): you cannot continue to use the
printer. Intervention is required to recover from the error. Fatal
errors are irrecoverable and require a service call.

Blinking 1 (2S cycle)
An error has occurred but
printing can continue if you
press the ON LINE or CANCEL
switch.

Blinking 2 (500mS cycle)
An error has occurred. You
need to replace consumables
or remove jammed paper, for
example. The printer then
recovers from the error and
printing becomes possible
again.

Blinking 3 (120mS cycle)
A serious error has occurred.
rebooting or a service call is
required.

The Status Monitor in Windows provides a readable description
of the printer status corresponding to the indications of the
LEDs. In Mac, the printer driver provides status information
once you have sent a document to print. In Windows, if you
have the Status Monitor Preferences set to Pop up on alerts,
this readable message will be presented on screen whenever
an abnormal condition occurs.

There's no further information. Sorry.

Jul 19, 2011 | OKI C3400n Laser Printer

1 Answer

Hi! can u help me?........... my canon s300 printers cant print, i try to print the status monitor wont say,can u help me?1 blink green.7 blink cartridge.


Try reinstalling the printer driver, it may have been corrupted.

You can download the Canon printer drivers from their support WEB site. Please click on this link and select your model printer to download :-
http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

Nov 27, 2010 | Canon BJC S300 InkJet Printer

1 Answer

Error message when trying to copy a document: Paper size detected is not supported. Job cancelled.


The Print Diagnostic Utility diagnoses and resolves common printing problems and communication problems, including:

If you prefer, you can skip this information and go directly to downloading the tool .

  • Connectivity :
    • USB: Ensures that the USB connection from your computer to the HP product is working correctly.
    • Network: Ensures that the network connection between your computer and your network is working correctly. If the tool detects a network connectivity problem, you will be prompted to run the HP Network Diagnostic Utility for better results.
  • Spooler : Automatically restarts the print spooler, which sends print jobs from the computer to the product, if it has been stopped.
  • Online status : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
  • Device manager : Checks for problems in Device Manager that would prevent printing.
  • Print queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
  • Port : Checks the port settings for the HP product.
  • Driver : Checks for alternate-driver settings.
  • Conflicts : Checks for conflicts with other drivers, such as other printer brands.
  • Default printer : Checks the default printer setting and prompts to select the HP product as default (optional).

Oct 26, 2010 | HP Photosmart 3210 All-In-One InkJet...

3 Answers

I have a message showing bk tank - code


Its detecting an incorrect ink tank.

The printer is not happy with one of your tanks. Make sure you have PB inks if it is a PG printer.

More probably the job you are printing requires the other black ink tank. Very important to make sure your status monitor is installed correctly, make sure when you send a job that it displays the ink tank levels and not question marks. You should be able to find out roughly how much ink is left through the driver (status monitor) and also what type of black is installed. If you cant, you have not got the 'Status Monitor' installed.

Mar 09, 2010 | Canon imagePROGRAF W6400 InkJet Printer

1 Answer

Everytime I hit print I get a box saying Epson Status Monitor 3 Could not find specified file.


Go to the start menu and look at your programs under Epson and uninstall the status monitor 3 you don't need it to print. If it's not there try to find it in the uninstall programs under the control panel. If you get rid of it your printer should still print fine you just won't get all the messages from it. You can still do everything you need from the front panel. Just download the user manual from Epson.com You can still download the status monitor 3 from Epson if you really need it, but it may not work because of the previous installation.

Aug 25, 2009 | Epson Stylus 880 InkJet Color Printer

1 Answer

Message on screen


Try updating your print drivers:
Create a new folder on your desktop and name it newhpdrivers. Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop. Power down your computer. Reconnect the printer to the computer and turn printer on. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done


anaanymous

Oct 08, 2008 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Konica Minolta 5430DL error code 111112


I couldn't find the install disks so downloaded the driver from the Konica website, un-installed the software and re-installed it. After calibrating the colours everything seems fine now.

Oct 01, 2008 | Konica Minolta magicolor 5430 DL Laser...

5 Answers

Can't print


is this connected with a usb cable? did you try checking the printer status under control panel? try to download a HP Printing Diagnostic utility from hp.com.

Jul 30, 2008 | HP PSC 2110 Color Printer

2 Answers

Static Warning light


Hi Angela,

The Red LED has the following function;

On all the time (not flashing) - Lid is open.
On and flashing - An error has occured. ('out of dye film', 'card jam', etc).
The error would normally be reported on the PC screen via the status monitor. If the status monitor is not running you will not get any error messages. To get the status monitor running again, it's easiest just to re-install the driver. The drivers can be downloaded from Magicard's web site The latest driver for the Rio 2 / Tango 2 (V6.01) is also compatible with the Rio 1 / Tango 1 printers. Download the driver from here;

http://www.ultramagicard.com/support/technical-support/?R=&L=&id=&lang=1&printerID=7&supportOption=1

IMPORTANT: When you run the driver installation setup program, the printer should be switched off. Also, you will be given the following choice;
'Add a printer' or 'update driver files'. Select 'update driver files'. The PC will then ask you to restart. The installation will continue after the reboot. Select your communication type (either USB - recommended, or LPT). You will be prompted to switch on and connect the printer. If USB the port name will be 'NUSB01'. Follow the rest of the instructions to the end of the installation. You will be asked to choose the model at the end.

You should now have a working status monitor. Let me know what the error says on the PC screen if you get one when the printer initialises.

I hope this helps.

Jan 16, 2008 | Magicard Rio Card Printer

1 Answer

Error light and no printing


What does the status monitor message say? The red light is the most general error. It's bit like taking a 747 back to Boeing and saying there is something wrong with it.

If you do not have the status monitor installed, download it from Konica Minolta and run it. Once the status monitor is running it will read the error from the printer.

Sep 05, 2007 | Konica Minolta magicolor 2300DL Laser...

Not finding what you are looking for?
Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Cindy Wells

Level 3 Expert

4762 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...