Question about Broan-NuTone Allure III QS330SS Kitchen Hood

1 Answer

Broan Nutone Allure lll light problem

Right hand light won't work, new bulb didn't help this time.
other bulb works as always

Posted by on

  • Anonymous Mar 16, 2014

    how to remove fan housing broan nutone 52000

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 38 Answers

The problem is the little lever in the socket. Turn breaker of fan off, grab a flat head screw driver and lift the little lever slighty like a 45 deg angle. If not the replacement socket assembly is
part # R111630 comes in a pair. I do service calls for broan & Nutone

We have the part: www.inventex.com

Jean-Marc

Posted on May 14, 2008

  • sbograd Apr 29, 2011

    I know this post is 3 years old. But I have similar problem. Noticed right hand light took a few seconds to turn on after pressing switch (left hand light came on right away). After a week or so, right hand light won't come on at all. Tried bending contact in socket and still no go. I followed all wiring and it appears fine. Is there something else in socket that could be bad? Any help appreciated.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Bulbs blew on my nutone allure range hood new bulbs does not work. please help


Depends what is wrong.To call a repair man will cost a service call before he starts. Check all your wiring and see if there is a short. See what you can do before you call a repairman.

Nov 04, 2014 | Broan-NuTone Kitchen Ranges

1 Answer

When i removed the burnt out bulb, the whole socket, (rings) came out with the bulb, I didn't notice it until I returned with new bulb, at that time old bulb was already gone.... can i purchase a new...


I am sure that part is still available, however a model number would help in locating the part. NuTone has three different Allure series. You can check here for the part this is NuTone's website
http://www.nutone.com/index.asp
Or this company has a form to help you find the part
http://www.centralvacuumstores.com/fan_help.php

Aug 29, 2009 | Broan-NuTone Allure II QS230SS Kitchen...

2 Answers

42" Allure II Broan Range Hood I put a new bulb to replace


Get two new bulbs and install them. These bulbs are exposed to a lot of heat above the stove and the filaments get brittle. I suspect that the filament on the bulb that still worked broke when you were screwing it out or back in. good luck. please rate my answer. thanks noreen.

Feb 03, 2009 | Broan-NuTone Broan Range Hoods Allure II...

1 Answer

LIGHT SWITCH NOT WORKING


Its forsure 100% guaranteed to be the control board. Its located right behind where you push the buttons. You must remove the sticker (button pad) to access the three screws retaining the control board to remove it. The new control assembly comes with a new stickers.

Part # R111632
Price: $110.00
1-800-363-0566

p.s i do service calls for Broan-Nutone

Jul 25, 2008 | Broan-NuTone Allure III QS330SS Kitchen...

2 Answers

ALLURE II STOPED WORKING ??


Hello,

If nothing is working Lights/Motor Nothing, Its the small transformer. Theres 2 transformers. you will see blue and yellow wires coming out of it. I do service calls for broan & Nutone

We have the part: www.inventex.com

Jean-Marc

Mar 20, 2008 | Broan-NuTone Allure II QS230SS Kitchen...

6 Answers

Broan Allure QS2 Range Hood


Had same problem & fuse fixed it.
Before buying a new control board (approx $160), check the 3 amp fuse located on the inside of the vent on the control board. You have to take the light/bottom housing & black plastic air chute off to see control board/fuse.

Feb 21, 2008 | Broan-NuTone Allure II QS230SS Kitchen...

1 Answer

Controller failed when a bulb blew


Control Board: Part # R111638 = $110.00
I do service calls for Broan-Nutone

Inventex Inc

Nov 12, 2007 | Broan-NuTone Allure II QS230SS Kitchen...

Not finding what you are looking for?
Broan-NuTone Allure III QS330SS Kitchen Hood Logo

1,051 people viewed this question

Ask a Question

Usually answered in minutes!

Top Broan-NuTone Kitchen Ranges Experts

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Broan-NuTone Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...