Question about Standard (CRT) Televisions

Open Question

Changing symphonic tv to aux input to use a dvd player

Front and rear aux ports, but neither make my dvd player come on screen. is there a switch somewhere?

Posted by on

2 Suggested Answers

  • 2 Answers

SOURCE: RCA model F27252GY TV has no Video button or AUX channel for DVD

try putting the tv on channel 00, that is where this tv apparently shows the input from at least one on the video channels.

Nancy

Posted on Mar 01, 2009

lilmikew99
  • 105 Answers

SOURCE: I can't switch to aux/video without my remote.

not really sure about this but if you put a disk in then run auto scan for your channels,long shot but worth a try.

Posted on May 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you hook up a DVD player to this TV? It is a DTQ 13V5FC purchased in 2003.


I took a look at the specs for this set, and it has both front- and rear-panel audio and video input jacks. There's a button marked "VIDEO" on the remote that switches to the AV input so you can watch what you have connected. So yes, you can hook up a DVD player, but there are some limitations.

This isn't a stereo TV, so you'll need a Y-adapter (like this one from Radio Shack) to combine the right and left channel sound from the DVD player into a single mono input for the TV. This means you'll lose any stereo effects from the DVD. Also, even though there are two sets of AV input jacks, the TV can only use one at a time. You can't select the front or rear input separately.

Hope this helps. Thanks for using Fixya!

Mar 26, 2011 | Daewoo DTQ-13V1FC TV

1 Answer

II HAVE A 13 INCH BRAND MODEL DWT 1304. I JUST WANT TO USE IT FOR A DVD PLAYER. I HAVE NO REMOTE ,HOW DO I CHANGE THE TV TO PLAY DVD OR VEDIO


Connect the composite video RCA (yellow) cable output of the DVD player to the TV's video input RCA (yellow jack). Connect the red and white RCA cable from the DVD players audio output to the TV's audio input (red and white jacks). Select the source input from the TV's control panel - if it has an input selector switch, set it to select the video source from the front panel input jacks if you connected the three cables - yellow, red and white on the front of the set. Or, change the channel to receive the video auxiliary input source instead of the broadcast station.

Dec 20, 2010 | Durabrand DWT1304 13" TV

3 Answers

Connecting dvd player


the tv should be in video mode in order to accept input from dvd...when it does'nt work try to use a modulator that should be connected at the back through using cable with f-connector both sides...

Sep 02, 2008 | Symphonic ST420FF 20" TV

1 Answer

Dvd player hook up


DOES YOUR TV HAVE AUX RCA INPUTS OR JUST A STANDARD ANTENNA CONNECTION. CAN U ACCESS CHANNEL 3 OR 4 ON THE TV..HOW DO U ACCESS UR VIDEO INPUTS. A POSSIBLE SOLUTION IS TO GET A MULTI INPUT SIGNAL SELECTOR FROM RADIO SHACK THAT WILL TAKE THE RCA AND CONVERT TO STANDARD ANTENNA CONNECTION TO PLUG INTO THE PORT

Jul 20, 2008 | Durabrand DWT1304 13" TV

2 Answers

Am I connecting DVD player wrong?


on some of these older RCA try simply tuning it from the remote down to chanel 01 or 00 this may work. if not you have to go into the setup menu of this set and enable the aux inputs

Feb 19, 2008 | GE 25GT240 25" TV

3 Answers

How Do I Get a DVD to Work with This TV?


Make sure to switch the TV's tuner mode to Video or Aux mode.
You can change the mode using the original TV remote or directly from the TV's control panel.

Again, tuner mode picks up all live broadcast airwaves and Video or Auxillary mode displays what is inputed into the TV via second device..

Good Luck!

Feb 16, 2008 | RCA G32665 32" TV

1 Answer

Connecting dvd player to zenith sy2551s system and doesn't work


Yes, You need to be on AUX ,you can get to that setting by pressing channel 01 then press the channels down button instead of going to channel zero it will start to cycle through your AUX's inputs on the back of the tv.Also, another way to do this is on the original remote there will be a SOURCE button or INPUT button that can also cycle your TV through the aux inputs.REMEMBER.Make sure your DVD player is turned on and hooked up or else the AUX screen will be black.Rate me when you fix it!GOOD LUCK

Nov 18, 2007 | Zenith SY2551S TV

1 Answer

Can't find a channel to watch a DVD pre-recorded DVD


you should have a input select button on your remote. video 1 should be the front and video 2 should be the back. i had to buy 3 or 4 different universal remotes when mine messed up just to get the one button to change to change it to the inputs because there is no other way to change it to that with he buttons on the tv. kinda surprised that you didn't try and push that button yet. 

Aug 31, 2007 | Standard (CRT) Televisions

1 Answer

Video Input


Are you sure that the source is generating a video signal? It is extremely rare for both front and rear Video Input sockets to fail simultaneoisly. from your description, i would suspect the cable connecting the Viseo out of your DVD player / Video Game than the Video Input ports of the TV. If you have another cable, just try again with that. Or, try using the Red to red cable into the Yellow port, using one end at the DVD player and the other at the TV Video Input. If there is image, then it is confirmed that the cable is faulty, and you can get a replacement cable for a few bucks at any Video store.

Mar 20, 2007 | Symphonic ST419E TV

2 Answers

Having trouble hooking up my DVD player


Try looking on your tv's menu for "input" or "input select". This should allow you to switch to your front AV inputs. If that doesn't work hook into the coaxial cable in the back of the set (the one for your cable or satellite input. Plug the cable from the output or to tv side of your reciever into the input of the dvd player and run another lenghth of coaxial cable from the output of the dvd player to the coaxial input where your satellite or cable was plugged into the back of your set. When you want to watch a DVD just turn on the DVD player and the picture should come up. When you turn it off your satellite or cable should come right back.

Feb 20, 2007 | Durabrand DWT1905 TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68197 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...