- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most universal remotes don't have all the functions of the original remote controls.You may be out of luck unless you can find an original remote. There are web sites that sell original remotes. Just Google TV parts stores.
Programming a universal remote does not change any settings for the TV. If the original remote is not working you may want to try changing the batteries. If this does not help, the remote itself may be bad.
lost remote I now how to tune in with out it , but a key symbol as come on so will no longer let me tune in how do I get the key symbol off as it locked it self it if so I need a remote to unlock it thanks
Depending on how old your TV is a cheap universal remote should contain the codes for your set as a replacement. All TVs have manual tuning buttons, often the very few they have left. Look for a heading; PROG or TUN or CH or CHAN between arrowhead symbols pointing either to left and right or up and down on any front panel of manual buttons, probably behind a swing-down flap. There will also be a button varoiusly headed STORE or MEMORY. There are two main procedures of manual channel tuning which both end with pressing a Store button either once or twice when you've set the channel you want. A few minutes of experiment once you've found these should put matters right.
I don't think you'll get rid of the on-screen ident until you get the original remote. The symbol you need to look for is a TV screen with a cross in it [+] a bit like this. It is possible that another SANYO remote may do the job for you, but is best to have the remote which goes with the TV.
some times on the universal remote ther are more then 1 code that will work with your tv. some codes will only do some things try all the codes on the remote for that brand. you should find one that works for you with 3 remotes you have a better chance of getting the right one hope this helps you
I'm sure you know you need the original remote if there is no menu on the front of the set. I suggest doing a search for customer support online for Sanyo products. There you will find contact numbers to see if one is available. Try "Sanyo remotes" on Google or Yahoo etc. Hope this helps
What is your universal remote control? if its not philips magnavox you try this universal remote control you will set the code match to your tv sanyo which you will see at the back of the instructions manual when you buy this remote control. follow the instruction of the manual on how to enter the code for tv. thanks.God bless you. i hope it will help.
Your in the video mode so you have to change the input. On the original remote, its the button left of the power button. A universal may not work for this. If you need the original remote, Its available at http://www.remotes.com Good Luck