Question about Onkyo TX-SR605 Receiver

2 Answers

HDMI SOUND Hello,i ave recently bought the onkyo TX-SR605 but cannot get the different digital signals through the HDMI leads.I have a toshiba HD DVDplayer in the HDMI 1 input & a Sony blu-ray player in HDMI 2,the picture comes thru but if i try to select true hd or DTS HD on a disc it just shows pcm on the display.Ialso have sky HD linked into it through an optical lead and this works fine,any help would be very much appreciated.

Posted by on

  • 3 more comments 
  • Turtle Boy Feb 13, 2008

    Thanks for the advice,the reciever seems to be working now,not sure exactly what i did apart from changed a few settings on the dvd player and tried again.Played the HD DVD of 300 and the TRUE HD sign came on,lets hope thats that, thanks agen.

  • Anonymous Feb 20, 2008

    I'm having the same problem. I have the PS3, and the Toshiba HD A2. I'm also using a 3 way HDMI hooked into the Game/Tv hdmi slot 1. And my HD Sat in the DVD HDMI slot 2. My Dvd's have True HD and the other advanced logos, rush hour 3 even has 7.1, but I haven't heard any of these advanced sounds yet. It keeps saying pcm 48 hertz. I have the Ps3 set to LPCM, and the HD DVD to PCM as well. In order for me to get the 7 speakers to produce sound I have to set the receiver to the P II movie setting. But I know that not true hd, or true 7.1.

  • Anonymous Feb 20, 2008

    I just posted the previous question, and needed to add that all my source formats are set to Direct. The receiver only seems to respond when I change the first one in the list, the analog one at the top.

  • gz2fine Mar 21, 2008

    I also have the onkyo 605 and using the ps3 and hd d3 and havent seen the true HD signal yet....nor the dts HD. I have tried everything and all i get is direct or mulitchannel. Please someone tell me if its something im missing.

  • scotttina9 Aug 10, 2008

    i cant figure out how to play dts hd sound on my tx-sr605 i have a new sony player that decodes all hd audio signals

×

2 Answers

PS3 and many bluray players do this encoding internally. Therefore all the amp sees is pcm.

Posted on Mar 27, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

True HD can only work with HDMI interface and is only available on some newer HD DVDs. Check the DVD to see if the True HD encoding is available.

Posted on Feb 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Onkyo tx-sr605 no sound?


Are you connected by HDMI? If so, your HDMI board may be faulty. I was having major drop outs with picture and sound until I got it replaced.

May 14, 2014 | Onkyo TX-SR605 Receiver

1 Answer

I am trying to get the amp working through my tv using HDMI leads. I have no HDMI out on my tv so I used the lead from HDMI 1 on my tv to HDMI out on the amp. The set up menu appears on my tv but no...


Contrary to the instructions included with most AVR's...

You don't need to take video out from the TV to the receiver. Once it gets to the TV it has found its ultimate destination.

And you don't NEEDS to GET audio FROM a TV either, unless it tunes stations from its own antenna.

Otherwise the SAT/Cable box can provide analog audio to the TV for watching lo-fi programming like news with the Onkyo OFF; and you can run digital multichannel directly to the Onkyo for its special treatment.

Running either hi-end audio or high-end video to a device that doesn't absolutely need it wastes expensive cabling and introduces a couple more connections to worry about.

http://www.retrevo.com/support/Onkyo-TX-SR605-Receivers-manual/id/2526bh742/t/2/

Feb 14, 2011 | Onkyo TX-SR605 Receiver

1 Answer

I have an Onkyo TX-SR605 , I have my ps3 connected via hdmi and from the amp to a 3d tv via hdmi . when i am connecting through the amp the PS3 does not recognise i have a 3d TV and will not play 3d Movies...


No but you may be able to help me. I have the same amp and ps3. I have HDMI leads from both but cannot get sound or picture. I do get the set up menu which means it recognises the HDMI lead. How is yours set up ?

Jan 25, 2011 | Onkyo TX-SR605 Receiver

1 Answer

Sound won't play through Onkyo TX-SR605 when using HDMI


The chances are that you have selected an incorrect sound setting or not switched it on, for the HDMI you are using. With Onkyo receivers each connection will have it own settings for video and sound. You just need to look in the manual as to how to select the settings.

May 08, 2017 | Onkyo TX-SR605 Receiver

1 Answer

Remote Control Not Communicating with TX-DS787


Hello, I am sorry about your issue. Your hook up should have nothing to do with the remote. You should get some functions like on/off, volume control. Thank you, Onkyo, USA

Apr 25, 2017 | Onkyo TX-DS787 Receiver

1 Answer

Onkyo TX-SR605 7.1 Channels... Problem


firmware up date go to onkyo homepage

Apr 01, 2008 | Onkyo TX-SR605 Receiver

1 Answer

Sound won't play thru stereo from t.v.


take the main tv digital opti outto sterio ok on ch or from dish box to sterio on a ch

Feb 02, 2008 | Onkyo TX-SR605 Receiver

1 Answer

Onkyo 605 HDMI Sound


Change the setup in the Hardware control/HDMI/ HDMI Audio...

Jan 17, 2008 | Onkyo TX-SR605 Receiver

2 Answers

New home theater setup- no signal at tv using onkyo tx=sr605


Could well be the quality of your cables. if you have high end cables the consult a service agent. if you have the cables that came with the products, go and get some better ones.

Nov 04, 2007 | Onkyo TX-SR605 Receiver

1 Answer

Cable connection to Onkyo TX-SR605 7.1


You will have to connect your coax to the tv coax input.You can view cable this way.To use the hdmi input to tv,you will have to change your input settings back and forth on the tv menu from hdmi to rf input.There is no way to hook your cable to the txsr.

Oct 22, 2007 | Onkyo TX-SR604 Receiver

Not finding what you are looking for?
Onkyo TX-SR605 Receiver Logo

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Dennis McCollum

Level 2 Expert

137 Answers

 Grubhead
Grubhead

Level 3 Expert

4850 Answers

The Knight
The Knight

Level 3 Expert

72601 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...