Question about Epson LX-300 Matrix Printer

1 Answer

EPSON LX300 Matrix Problem

I also have the same problem.. plesase can anybody help me, i need to print a lot of stuff for my project which is to be submitted soon.. i tried formatting the pc cause i thought it was cause by a virus, but its stil the same, i tried transfering the printer to another computer, and the printer works fine, im really confused, i have formated the pc.. the printer prints double of each line, or sometimes it prints in double space.. im really confused. i need help.. plese!!! is it the printer which has the problem or the PC? the cable looks fine too...

Posted by on

  • sasa beljin May 11, 2010

    you have problem with your printer ,try to enter in setup mode or start print test on you printer and we will se what is the problem. press lf/ff buton on teh printer and turn him on,is the print ok

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi,
I hve Epson Lx300+ printer. it was working fine with Xp sp2, but since last two days it itching me. normally when i want print it appear on right hand low corner but disappear after some time without any printing any page. Although I repair my xp also update the driver. And Os showing everything fine in device manager but i am still not able to get any print. Need help. if any solution is ther then email me plz at m2saleeem@gmail.com

Posted on May 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot print the endless paper


The Epson LX300 has a paper release lever which should be set
; forward for continuous paper printing and
: back for single sheets.

Oct 03, 2011 | Epson LX-300+ II Matrix Printer

1 Answer

Epson printer lx300+ii printer, if i print a document atometicaly pause


Hello!

Make sure that there is no paper jam in your feeder. You have to clean the feeders if there is any dust insde of it.

Regards,
fossildude

Nov 22, 2010 | Epson LX-300+ II Matrix Printer

1 Answer

Printer epson lx300 can't stop printing


You need to reset the board, all dot matrix have some kind of a chip set as well that mostly can be remove. Just make sure you are grounded, its a last resort that I normally do for dot matrix that can't seems to stop printing or the panel are always lights on.

Oct 04, 2010 | Epson LX-300 Matrix Printer

1 Answer

Epson LX300 page print problem


the page length is not properly set.
Refer your user manual and set the proper page length.

Feb 10, 2009 | Epson LX-300 Matrix Printer

2 Answers

EPSON LX300+II PRINTS THE SMALL FONT & LEFT SIDE


change the fonts of the printer by pressing the font button on the panel (Refer user manual for more details)

Feb 04, 2009 | Epson LX-300+ II Matrix Printer

1 Answer

Printing shows doubling


alguien por favor envieme los drivers de la impresora EPSON LX300 les agradesco

May 26, 2008 | Epson LX-300 Matrix Printer

4 Answers

Epson lx300+ii with serial port to fujitsu pc


use the com1, and use a baud rate like 9600, with 8 and 1 bit stop. dont. be sure that is in ESC/P or IBM as you requiered. if your software use directly the serial port, be sure that the bios set up is properly. i think that the lx300+ have less buffer than lx300+2
and if you use high speed, could loose info.


Jan 28, 2008 | Epson LX-300+ II Matrix Printer

1 Answer

Printer not Print data in English Language


Hi, you may want to reset/restore the Epson LX300 to default settings. This can be done by pressing down on the FONT button while powering on the printer. If done right the LX300 will print a test page with the firmware version. It is also possible that the drivers are corrupted. In Start, Printers & Faxes, delete the LX300 printer, restart your PC and then re-install via Add Printer. In some cases, defective parallel cable can also cause problems. Unfortunately the only sure way of checking is by replacing the printer/parallel cable with a known good/operation cable. If the printer would really be requiring service, a Service Manual is available at (http://www.eserviceinfo.com/index.php?what=search2&searchstring=DPA-300) Hope this be of some help to you. Good luck and pls post again how things turn up.

May 26, 2007 | Epson LX-300 Matrix Printer

Not finding what you are looking for?
Epson LX-300 Matrix Printer Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...