Question about Computers & Internet

1 Answer

Security Protection When i'm trying to open a file created in Casio?s Photo Loader software that contains active content on a system running Windows XP Service Pack 2, Internet Explorer displays a security protection message stating it will not play the slideshow unless you disable active content blocking.

Posted by on

  • micromaster
    micromaster Feb 11, 2008



    Hi 2toy, your computer might not recognize the XA-HD500 if you connect it to your PC through a USB 2.0 hub if the hub also has slower USB 1.1 devices connected to it. This is a problem with the XA-HD500’s firmware, and downloading a firmware upgrade from JVC’s Web site should fix the problem.

    To do this, open a Web browser with an active Internet connection and go to the following URL: www.jvc.com/custrel/index.jsp. Click the XA-HD500 Firmware Upgrade link to download the firmware upgrade and the XA-HD500 Firmware Upgrade Instructions link to view the instructions for properly installing the firmware upgrade.

    As a general word of caution, upgrading a device’s firmware is similar to editing your PC’s registry. Be absolutely certain you know how to perform the necessary steps before actually carrying them out. A botched firmware upgrade can irrevocably damage your hardware.



    Hope it helps you.



    Enjoy



    Pls. rate & hope to hear more from you..



    tnx

    -micro

  • micromaster
    micromaster Feb 11, 2008

    i already check it and visit the site you posted, but still i have the same problem.



    i'm getting confused and loosing my temper with this thing and i can't make my work done.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 84 Answers

Http://support.microsoft.com/kb/154036

check this thread on how to disable active content.

goodluck!

Posted on Feb 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to restore MySQL database Windows tool?


You can restore corrupt and delete SQL database file in few steps for MySQL Restore Toolbox. With this software you can also recover triggers, keys, indexes and table. Software support multiple MDF file recovery option. Software is supported by all Windows operating system. Get more ideas and download free trial version from -http://www.filerepairforum.com/forum/databases/databases-aa/mysql/1162-dump-mysql-database-file-is-error

May 29, 2015 | Sun MySQL

7 Answers

Software problem; Lotus 1-2-3 Release 9 for Windows


Do Alt Print Screen and the paste into wordpad the print it

Mar 05, 2008 | Computers & Internet

Tip

How can you crate setup file or .exe using QT platform



We are developing software but we are unable to run in others PC/Computer. As we know that QT is Platform Independent and Open source Software, which is use Nokia to develop Mobile Application.

Needs:
  • Qt
  • Setup creator
  • libgcc_s_dw2-1.dll
  • mingwm10.dll
  • QtGuid4.dll
  • QtCored4.dll

Procedure:
  • When you start a project then automatically qt creates 2 folders within main Directory. One is "Debug" and another is "release".
  • If we are want to run application in other PC then we need ".dll" files and combined them.
  • Open My Computer and go to the "Installation Drive" where QT is installed.
  • Find out the Main Directory of the QT. If you install in "c:" then go to the c drive and open "qt" folder and get a directory name as "2010.01"
  • When you open "2010.01", then you can see another directory as "qt" open it.
  • You click on Search option from the "Standard Button" bar and type the libgcc_s_dw2-1.dll file and search it. When you find it copy the file and paste into your Project Directory's "Debug" folder. Do same things for another three ".dll" files.
  • After that you can run your application by the .exe file. Does not need to open Qt and open your project then run.
  • Now you can simply copy the project Directory and paste into other PC and open Directory and run it.
  • Or you can create a shortcut on the desktop as others software. From where you can run it by Click.

Deploy and Packaging:

If you want to create a setup file as other software, need to install it. Then -
  • First download a file "icinst", it's free. After that install it.
  • After that open it from start programs and windows will be come where you select your Project Directory and do "Next".
  • You can create a License Agreement as others software.
  • Do as per the given Instruction.

Note: Before create a setup file you must be collect all dll files and paste in "debug" folder


Imon Saha

on May 16, 2011 | Computers & Internet

8 Answers

Error between conversion of EML to PST file


New updated tool is here please try it and convert you EML file into PST outlook file format with any error. Visit here:
Convert EML to PST

Jun 09, 2014 | Microsoft Database Software A5K-02817 SQL...

1 Answer

I was on-line Monday with knkcook (if i rememvber correctly). I was waiting while he was looking for an answer. Then the system cut us off and it wouldn't re-connect with him. I am having a problem...


Hi
  1. Insert your Windows 2000 CD into your computer's CD drive.
  2. Open Windows Explorer and navigate to "Valueadd\3rdparty\Mgmt\Winstle\Swiadmle.msi" on the Windows 2000 CD.
  3. Double-click the MSI file to install the Veritas Software Console. Specify an installation location that will be accessible by the clean PC creating the installation package.
  4. Navigate to the file named "Discoz.exe" in the WINStall folder, then double-click this file to execute the Discover tool.
  5. Click the "Before" snapshot and select the clean PC. Click "OK." Discover will take a snapshot of the clean PC before installation of the third-party application.
  6. Install the third-party application onto the clean PC and reboot the computer. Run the newly installed application on the PC to ensure that installation was successful. Quit the program, once verified.
  7. Launch the Discover application.
  8. Click the "After" snapshot option, and select the PC again. Click "OK." Discover will take a snapshot of the PC after the installation of the third-party application. In doing so, all data that has changed is recorded and compiled into an MSI file. This data includes files, registry entries and edits to settings necessary to install the application.
Lastly
Copy the MSI file to another computer and test the installation package by installing the software.

Reference
  • Microsoft : How to Create a Third-Party Microsoft Installer Package
  • CLICK HERE

Hopefully this will help you
Regards

Jun 08, 2011 | Microsoft Visual Studio Professional...

1 Answer

Trying to view slide show in Flickr. Says I need


All web browsers in WIndows XP will usually have JavaScript enabled by default, but on occasion, it will be turned off. By turning JavaScript on in your web browser, you will have access to more interactive content when you visit certain websites. For Windows XP users, JavaScript can be enabled in both the Internet Explorer and Firefox web browsers. Open the Internet Explorer Click on "Tools" in the top menu bar and choose "Internet Options."
Go to the "Security" tab at the top of the window and click on the "Custom Level" button. croll down to the "Scripting" category and click on the "Enable" option next to "Active Scripting." JavaScript is now enabled.
  • Step 4 Scroll down to the "Scripting" category and click on the "Enable" option next to "Active Scripting." JavaScript is now enabled.

  • Read more: How to Turn on Javascript in Windows XP | eHow.com http://www.ehow.com/how_4812316_turn-javascript-windows-xp.html#ixzz0ssJIX0wR

    Jul 06, 2010 | Computers & Internet

    1 Answer

    .exe error


    i guess ur using a licensed and updated antivirus (i prefer avg/kaspersky)..!!
    this is a common problem now days, probably itz caused by a virus/trojan..

    download microsoft kb890830, install n run

    also possibilities of:
    u may not hv java runtime/adobe flash player/shockwave player installed..
    the windows firewall is limiting the site..
    may b ur antivirus is doing so..
    some spyware/trojan horse also may play foul..
    sometime it also depends upon the browser u r using..
    may b it is black-listed or restricted by using 'content advisor' (in case of internet explorer) in ur computer by some user or the above..
    may b it is being filtered by the 'phishing filter'..
    there may b possibilities that the site may contain 'active content'..

    the Software part:..

    1)hv a licensed and UPDATED antivirus installed (i prefer avg/kaspersky, remember, without updation a full version antivirus is useless)..

    2) download, install n run microsoft kb890830..http://www.microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en..

    3) download n run Startup Control Panel..http://download.cnet.com/Startup-Control-Panel/3000-2094_4-10039330.html..'remove all the unnecessary startup items from here..(if u can't find what to remove, post me/us in ur comment with all the items listed in each n every tabs herein)..

    4) remove all unnecessary software from add/remove programs..

    5) download, install n run 'Advanced System Care Pro'..http://download.cnet.com/Advanced-SystemCare-Pro/3000-2086_4-10399324.html..

    6)disable the following:..
    a)'Automatically Restart' right click on my computer->properties->advanced->startup n recovery->(uncheck on the) Automatically Restart;
    b)'Error Reporting' right click on my computer->properties->advanced->error reporting->disable error reporting->(uncheck on the) 'but notify me when critical error occur'..

    7) Increase the size of Virtual Memory, Initial: 1440; Maximum: 2880

    if u r bot a professional, always better to seek advise from ur system admin/vendor....

    Nov 18, 2009 | Computers & Internet

    1 Answer

    Can not install Net Framewoek 3.0 because of


    Sir,

    Run the cleanup tool to clean out temporary files, run the .NET
    Framework cleanup tool, Run the installation file, then reboot and try to install it again and see if it works. If not try the below following steps....

    Step One:
    1. Go to Add or Remove Programs, try to remove all .NET Framework.
    2. Please download and install the Windows Installer Cleanup utility
    from this link:
    http://download.microsoft.com/downlo...BD/msicuu2.exe
    3. Then, please run it from Start-> All Programs-> Windows Install
    Clean Up.
    4. Please remove all Microsoft .NET Framework shown there and click
    Remove.
    Step Two:
    1. Click Start->Run, type INSTALLER and click OK.
    2. In the open folder, click View menu and select Details.
    3. Right-click the Date Modified column header.
    4. Click Comments
    5. In the Comments column, locate the cached Windows Installer file
    that displays Microsoft .NET Framework 1.1 (English) RTL x86 enu.
    6. Right-click the cached Windows Installer file and then click
    Uninstall.
    7. Close the window.
    8. Delete the cached Windows Installer file.
    Step Three:
    1. Restart your computer.
    2. While your computer is booting up, press F8 to invoke the startup
    menu.
    3. In the startup menu, choose Safe Mode.
    4. Log on as an administrator.
    Note: In Safe Mode, your system display and Desktop will look and
    perform differently than in Normal Mode. This is only temporary.
    5. Delete the folder C:\WINDOWS\Microsoft.NET
    6. Delete the folder C:\WINDOWS\system32\URTTemp
    7. In the C:\Windows\System32 folder, locate the file mscoree.dll.
    Right click and rename it to mscoree.old
    Step Four:
    1. Click Start->Run, type REGEDIT and click OK.
    2. Navigate to the following registry key by expanding the "+" beside
    the registry tree in the left pane:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework
    3. Delete this key in the left pane.
    4. Repeat steps 2-3 to delete the following key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup
    5. Restart your computer to Normal Mode
    Step Five:
    1. Please download the Microsoft .NET Framework Version 1.1
    Redistributable Package from the following link and save it to C:
    http://www.microsoft.com/downloads/d...DisplayLang=en
    2. Click Start->Run, type "c:\dotnetfx.exe /C" (without quotation marks
    and there is a space in this command) in the open box and click OK.
    3. Click Run, and type "C:\.NET Framework 1.1" (without quotation
    marks) in the open box click OK
    Note: If you are prompted to create this folder, please click Yes to
    continue.
    4. Locate the folder C:\.NET Framework 1.1 and double click the file
    netfx.msi in it to install .NET Framework components.
    If .NET Framework 1.1 can be successfully installed, we can go on to
    install .NET Framework 1.1 Service Pack 1:
    Microsoft .NET Framework 1.1 Service Pack 1
    http://www.microsoft.com/downloads/d...DisplayLang=en
    Step Six:
    If the above two can be installed correctly, please download KB886903
    from the following link and install again:
    http://www.microsoft.com/downloads/d...displaylang=en
    If the problem still exists, please describe the error message when
    installing Microsoft .Net Framework Service Pack in further detail


    Thanks
    Good luck

    Nov 07, 2009 | Microsoft Computers & Internet

    2 Answers

    Try to Reinstall Robohelp 5


    http://kb2.adobe.com/cps/403/kb403696.html

    The above is the link with instructions on the patch files needed to run x5 without activation. This is an Adobe link. This is the lowest version supported and the only way Adobe will support x5. For your information, there is no problem running x5 under Vista, although again, Adobe will not support this. Other than installing the various patches, the main procedure needed is to disable Vista's UAC (User Access Control). Otherwise, the WYISWYG editor will not open properly and you'll get a Component 4 Load error. The only issue besides this under Vista is that x5 doesn't support Office 2007. However there is no problem with creating Windows and Windows HTML help files.

    Aug 18, 2009 | Macromedia RoboHelp Office X5

    Not finding what you are looking for?

    Open Questions:

    Computers & Internet Logo

    Related Topics:

    60 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    kakima

    Level 3 Expert

    100243 Answers

    David Payne
    David Payne

    Level 3 Expert

    14160 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...