My maytag washer is always out of balance in spin cycle

Replace all four struts

There can be several causes, the drum off balance would cause the shavings during spin cycle , balance could be one of the the balancing mechanism failed and not running could be the balance sensor shutting down the spin cycle. You should start by checking the balance shocks .

The balancing straps that hold the drum in balance could be broken or the springs could be wore out.

I have the same problem. During the spin cycle, the washer spins all over the room.....very loudly.

Washer may be out of balance, Move closes around in washer and restart

Could be broken suspesion leg or spring securing the drum

u may have a loose spring

Way to go. A+ to you. Good Luck in future.

Too much laundry in your machine. Try a smaller load and see if you have the same problem

Hi, try to check the spring virator support might pollout from slot or hole connected, some adpter are rusted spring replace it are also available in appliances store.