Question about KB Gear Pablo Graphic Tablet

2 Answers

How to to upgrade my windows 98

My windows 98 will not start my cd when inserted into cd -romPlease help me to update my windows 98 to windows xp or vista

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Well that's a bit drastic. Instead, put your XP CD in the CD-ROM drive. Then just as you start your PC go to the BIOS setup. Usually this requires hitting F1, F2, F10, DEL at the right moment (some PC's will say "strike F1 to enter setup" or similar). It will always be before you see Windows start notification. OK, now go to the BOOT OPTIONS or BOOT ORDER and make sure your PC is set to "BOOT FROM CD" before "BOOT FROM HARD DRIVE" (this may be in a slightly different form but you got the idea). You will be able to change the order of the boot devices. Once happy, save the changes and exit. Reboot and the PC should pick up the XP CD to start the update.

Posted on Jun 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 440 Answers

Put xp in formatt hard drive ok

Posted on Feb 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to install windows xp in sony vaio vgn-nw270F? tia


hello,

I will explain the process for you.

First of all if your computer has some windows like windows 98 or older than you can install the windows by simply inserting the disc and choosing the drive and install the windows.

However if you do not have any windows installed on your system or you have windows installed later than windows xp and want to install another operating system than use the following method.

First of all,
Please make sure you set the boot-priority first.

- you can go into bios by pressing the F12 or ESC key on your keyboard or if the key is different keep in mind when you turn your computer on you should see a small line at the first blink of your screen telling you to press a key to go to bios.

- Thank once you are in the bios please check the boot section and there set the boot-priority and by setting i mean the dvd drive or the cd drive should be apprering on the first section which means that your computer should boot from cd or dvd so that it can read your disc before it reads your hard-disk. remember to change this setting back once you have installed the windows.

- please insert the windows xp disc.

- than press enter on the bios screen and save changes and exit

- you comptuer will restart and

- it will take you straight to the point from where you can install windows using simple few clicks you just have to enter the serial number and your name etc. and the rest computer will do it-self.

Please let me know if there is anything else i can help you with.


Thank you.

May 18, 2010 | Sony XP Pro Upgrade - VS-E85-00087 Upgrade...

Tip

Error code 7


To resolve this issue:
  1. If you are upgrading Windows 98 or Windows Millennium Edition, follow the troubleshooting steps that are described in the following Microsoft Knowledge Base article: 310064 (http://support.microsoft.com/kb/310064/ ) HOW TO: Troubleshoot Windows XP Problems During Installation When You Upgrade from Windows 98 or Windows Me Test to determine if the issue is resolved. If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to the next step.
  2. Perform a clean installation of Windows XP:
    1. Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive.
    2. If Windows automatically detects the CD-ROM, click Install Windows to start the Windows XP Setup Wizard. If Windows does not automatically detect the CD-ROM, click Start, click Run, type CD-ROM drive letter:\setup.exe, and then click OK.
    3. Press ENTER.
    4. Click New Installation, and then click Next.
    5. Follow the instructions on your screen.
  3. When you receive the "Press F6 to load SCSI/Raid Drivers" prompt, press F7 to bypass Advanced Configuration and PowerInterface (ACPI) detection.
  4. Finish the installation of Windows XP.

on Mar 16, 2010 | Computers & Internet

1 Answer

Can not install windows xp in my system send error code 7


try this one:

To resolve this issue:
  1. If you are upgrading Windows 98 or Windows Millennium Edition, follow the troubleshooting steps that are described in the following Microsoft Knowledge Base article: 310064 (http://support.microsoft.com/kb/310064/ ) HOW TO: Troubleshoot Windows XP Problems During Installation When You Upgrade from Windows 98 or Windows Me Test to determine if the issue is resolved. If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to the next step.
  2. Perform a clean installation of Windows XP:
    1. Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive.
    2. If Windows automatically detects the CD-ROM, click Install Windows to start the Windows XP Setup Wizard. If Windows does not automatically detect the CD-ROM, click Start, click Run, type CD-ROM drive letter:\setup.exe, and then click OK.
    3. Press ENTER.
    4. Click New Installation, and then click Next.
    5. Follow the instructions on your screen.
  3. When you receive the "Press F6 to load SCSI/Raid Drivers" prompt, press F7 to bypass Advanced Configuration and PowerInterface (ACPI) detection.
  4. Finish the installation of Windows XP.

Mar 13, 2010 | Computers & Internet

2 Answers

Need to upgrade from windows 98 to windows xp on ibm 760e thinkpad


Before you begin, be sure to go to Lenova Website and download the appropriate XP software & drivers and burn them to a CD or flash drive. You will need them after the install is completed. After that is completed, you are ready to install. Insert the XP Install disk and choose INSTALL XP and on the next screens drop down menu, choose UPGRADE. Follow the instructions. After it is completed, use the CD or Flash Drive to install the proper system software & drivers.. GREAT LUCK!! Please rate me, k? Thank You Lucky4lynn2

Mar 06, 2010 | IBM ThinkPad 760E (9546U4A) PC Notebook

2 Answers

Can you change windows 98 into xp


yes, you will need to buy the upgrade either online to download or by CD but a word of advice if the computer is for personal use windows vista would be better and if its for business Xp its better

Jan 31, 2010 | Microsoft Windows 98 for PC

1 Answer

I need a copy of windows xp with registry key


Contact any retail computer-store, or shop on eBay or AMAZON.
They can still sell you a "Windows XP Upgrade" kit,
to allow upgrades from Windows 98 (assuming that you still have your Windows 98 CD-ROM) to XP.

Jul 22, 2009 | Microsoft Windows XP Home Edition with...

1 Answer

Upgrade NEC Versa VX


You can insert the Windows XP CD while logged on Win 98 and run a test from the CD. Obviously you need a larger Hard Disk and at least 126 MB RAM to bring XP to a usable speed. You can look for RAM upgrade options in this page.

Apr 18, 2009 | NEC Versa VX Notebook

1 Answer

I can't install it.


Ensure that you are running XP Service Pack 2 version, this software won't work on Windows previous version.

If you are using 98, you need to upgrade system.

If you are using XP you may need to upgrade service pack 2, see Download details: Windows XP Service Pack 2 .

Jan 04, 2009 | Sony Vegas Movie Studio Platinum 8

1 Answer

Install Xp From Dos


If XP will not install from the CD or if you have a new drive with no operating system onit yet try these:

Install Windows XP from the hard drive with Windows 98 already installed:

Boot Windows 98
Insert the XP CD into your CD reader
Explore Windows XP through My Computer
Copy i386 folder to C:\
Go into C:\i386 folder and double click on winnt32.exe to launch the setup from the hard drive

Install Windows XP from DOS (ie. no OS on a new hard drive):

Boot with a Windows 98 Start Up disk
Insert the Windows 98 CD into the CD reader
Run smartdrv.exe from the Win98 directory on the windows 98 CD (file caching)
Type cd.. to back up to the root directory
Insert Windows XP CD into the CD reader
Copy the i386 folder to C:\
Go into C:\i386 folder on C: and type winnt.exe to launch the setup from the hard drive.



Oct 20, 2008 | Computers & Internet

Not finding what you are looking for?
KB Gear Pablo Graphic Tablet Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top KB Gear Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a KB Gear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...