Color to BW

I changed my image/graphic into a bw bitmap image. It worked for me. I get charged one side color and the other side bw.

The unit has a color controller PC board that switches between BW and Color. The fact that you still show color at all indicates the circuit is complete and the BW exists independently by itself. In some cases, the problem is due to connecting cables. Change out the current set and see if that presents a solution. Make certain all connections are firm and tight. Other than that, internal data switches pose a problem and the circuit needs to be traced using test equipment to locate the problem.

You will need to replace the empty color cartridge to get the flashing to stop.

However you should still be able to print in BW. Check that the applications you are running are set to
BW and not color in the configuration menu. That should permit you to print in BW only.

if your cartage is lo then clean crriage pcb if the problem is not solven the replace it

you can try to take out the color cartridge and set your printer settings to use blank ink or print in black only, then try to print again. Feel free to rate if this was useful/helpful.

my canon mp250 won't print color photos it does well with BW but not color. I took back the first one I had did the same thing now the second one won't print color photos off the internet. what did I do wrong? Both inks are brand new.

it has to have both color and bw catridges to work properly

try to change the colour catridge and the photo paper also.

please you got to printer preferences select it then show a manu you select color select print in color and print if you are not succed you change a color cartridge

You don't have to replace them as a set unless there both empty. You could try resetting the printer by unplugging it, wait 30 seconds, replug it back in, and turn the power on.