Question about PC Desktops

3 Answers

I lost my drivers and manual for my P4Vmm2

Where can i download or search this drivers and manuals? colors are in safe mode setting...

Posted by on

  • John Schafer
    John Schafer May 11, 2010

    Normally you can go to the Manufacturer's website and do a search for your model name/number. Then its just a mater of downloading the drivers and software. Please tell me:
    1. what OS? (Vista, XP, W98)
    2. What brand is your computer?
    3. What model name/number?
    4.Do you have broadband internet or are you using a modem?

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 123 Answers

My e mail is> priyabrat_pattanaik@rediffmail.com
Dont worry you can download from D-Link's website. However you need to choose correct Revision (Rev A or Rev B) before download. Its very clearly indicated on the website. You can proceed to links;

driver for Revision A
http://support.dlink.com/products/view.asp?productid=DWL%2DG510

driver for Revision B
http://support.dlink.com/products/view.asp?productid=DWL%2DG510%5FrevB


If you dont know what revision you have you can check these links
for Revision A
http://support.dlink.com/prod_img/revisions/DWL-G510v.jpg

for Revision B
http://support.dlink.com/prod_img/revisions/DWL-G510_revBv.jpg

Good Luck
Was this solution helpful? Show your Appreciation by rating it:

Posted on Feb 11, 2008

  • PRIYABRAT  PATTANAIK
    PRIYABRAT PATTANAIK Feb 11, 2008

    http://www.m-audio.com/index.php?do=supp...

    Good Luck
    Was this solution helpful? Show your Appreciation by rating it:

    First you can use your recovery and application disk that usually comes with every new Toshiba computer. If you dont have it still solution exist free of charge. You can go to toshiba's support website and download the related driver and install it.
    for your convenience I am adding the link below
    http://www.csd.toshiba.com/cgi-bin/tais/...@@@@0494371346.1199628694@@@@&BV_EngineID=cccjaddmmhdiekfcgfkceghdgngdgmn.0&ct=DL&all_docs=false
    or

    http://www.csd.toshiba.com/cgi-bin/tais/...@@@@0494371346.1199628694@@@@&BV_EngineID=cccjaddmmhdiekfcgfkceghdgngdgmn.0
    Good Luck
    Was this solution helpful? Show your Appreciation by rating it:

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Try to look in your computer your system information. In this area is where you can find the System model. Copy it and look at website writing the model name and what you need. Ex. AWRDACPI driver type it on search box of your internet windows.

Posted on Feb 11, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 178 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was given this pc by my cousin,I was trying to reinstall Winxp to establish ownership. When I was finished there was a bunch of hardware things missing,long story short , I tried to load the drivers and...


Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer Windows Advanced Options Menu Please select an option: Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode Start Windows Normally
Reboot
Return to OS Choices Menu Use the up and down arrow keys to move the highlight to your choice Select safe mode with networking to download http://ct.download.com/clicks?t=1169844150-ce770fd4fbc57664a08aea1a8f03b80d-bf&brand=DOWNLOAD&s=5 Windows XP/Vista/7/8
it might take some time being a freeware driver solution Note: it will find all of your outdated drivers
This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point.

Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated. it might take some time being a freeware driver solution note: it will find all of your outdated drivers this is a free driver solutions this will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated

Apr 05, 2013 | Dell Dimension 2400 PC Desktop

1 Answer

I cannot change my screen resolution


Boot up in safe mode and see if you can change the screen resolution. If not you are being limited by your graphics card (video card) and driver.

Turn off the computer, then hit the power button to turn it back on and immediately start hitting the F8 key repeatedly until you see SAFE MODE. Take the Safe Mode option and let it boot up. Safe Mode will look different to you, the screen will be darker and the icons bigger, this is normal. See if you can change the screen's resolution.

If you can't change the screen resolution, try downloading and reinstalling the video driver.

Get online and got to www.google.com In the google search box type: "Dell Support" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operating system when requested. Download and install the Video drivers.

May 24, 2012 | Dell PC Desktops

1 Answer

Mouse keep freezing on my Dell Inspiron 560


Sounds like you might have a virus or infection. Try booting up in Safe Mode and see if the mouse freezes.
Go to www.google.com and in the search box type:"Download cnet Malwarebytes" (without the quotes). Download andinstall malwarebytes from the sites download.cnet/malwarebytes. When thesite opens up click on the Green Download button on the left. Do notclick the Red Download button, that's junk. When it finishes installing the GuiInterface will open up with an offer to Accept a Trial Version orDecline. CLICK DECLINE you want the totally free version. Run aQUICK SCAN. As it scans, if it finds infections the number will be inred. When it finishes scanning, click SHOW RESULTS. A notepad textdocument will open up showing you the results. You can close the textdocument and go back to the Gui Interface where you will click REMOVE SELECTEDRESULTS. The objects will already be selected for you. When itfinishes removing the objects click ok and it will sometimes reboot yourmachine


Try reinstalling the mouse drivers.

Get onlineand got to www.google.com In the google search box type: "DellSupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Download and install the Mouse drivers.

Apr 26, 2012 | Dell PC Desktops

1 Answer

Sticky mouse hesitant


I would say you might have a virus or infection. Also it might be time to replace the mouse.
Have you checked your mouse properties in the Control Panel? Click Start/Control Panel and look for mouse. Look thru the settings and set them to default.
You can always download and reinstall the drivers for the mouse.

Get online and got to www.google.com In the google search box type: "Acer Support" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operating system when requested. Download and install the drivers.
Have you tried booting up in Safe Mode to see if it behaves the same way?

Turn off the computer, then hit the power button to turn it back on and immediately start hitting the F8 key repeatedly until you see SAFE MODE. Take the Safe Mode option and let it boot up. Safe Mode will look different to you, the screen will be darker and the icons bigger, this is normal.
If the mouse is ok in Safe Mode, then reboot again until you see Safe Mode but this time take the Safe Mode With Networking option (this will give you internet connectivity). Open your internet browser and download and install MalwareBytes.

Go to www.google.com and in the search box type: "Download cnet Malwarebytes" (without the quotes). Download and install malwarebytes from the sites download.cnet/malwarebytes. When the site opens up click on the Green Download button on the left. Do not click the Red Download button, that's junk. When it finishes installing the Gui Interface will open up with an offer to Accept a Trial Version or Decline. CLICK DECLINE you want the totally free version. Run a QUICK SCAN. As it scans, if it finds infections the number will be in red. When it finishes scanning, click SHOW RESULTS. A notepad text document will open up showing you the results. You can close the text document and go back to the Gui Interface where you will click REMOVE SELECTED RESULTS. The objects will already be selected for you. When it finishes removing the objects click ok and it will sometimes reboot your machine.

Apr 24, 2012 | PC Desktops

1 Answer

Im trying to restore mt dell pc..back to factory settings its running vista f8 doesnot work ive only got f2 and f12


F8 is not the key you would press to get into Factory Settings or System Recovery as it is called. F8 gets you into different boot modes such as Safe Mode, or Restoring your last good Boot settings.

The key most manufacturers use to get into Recovery is F11, but to be sure which key to use either tell us the model of your Dell or go look it up yourself by reading the owners manual.

Get onlineand got to www.google.com In the google search box type: "DellSupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Look for Manuals and Documents.Once you find the manuals search through them for Factory Settings or System Recovery. It will tell you which key to hit when you press the power button.

Apr 18, 2012 | Dell PC Desktops

1 Answer

What drivers can use for my video and sound card? ESC P4VMM2


driver for motherboard ECS P4VMM2
On this page you are offered with driver for p4vmm2 motherboard existing in our database. Icons placed on the left of file name will prompt you in which format and in what language driver download ECS P4VMM2 motherboard are represented in this file.
If the needed file doesn't exist, therefore the desired driver is missed in our database. It can be ordered in the File Request section.
You can also try to find the appropriate driver for kindred motherboard ECS models by clicking on the links shown below.

  • http://www.fixdevice.com/drivers/motherboard/ecs/p4vmm2.html
  • http://www.driverstock.com/elitegroup-p4vmm2-driver-download/25-9-3830/index.html

Sep 20, 2011 | PC Desktops

1 Answer

Where can i find a free download for P4vmm2 audio driver? i don't have the installer cd.


Search in your manufacturers website you can download the audio driver for free
also You can find your driver in

http://www.driverstock.com/EliteGroup-P4VMM2-driver-download/25-9-3830-55182/index.html

Mar 12, 2011 | PC Desktops

1 Answer

Bought new aoc monitor and plugged in and all I get a floating screen safer saying "input not support".


Your display resolution is set to something outside the range your AOC supports.

Start Windows in VGA mode (pick that option from the startup menu you get when you press F8 after the manufacturer's logo comes when you turn the computer on). Then set the display mode to 16-bit color and 800X600 resolution. This will allow Windows to start up next time with settings just about every monitor can handle.

Once WIndows is up and running, make sure you change your display settings to something the monitor can handle. Specs are in the manual or on the manufacturer's website, but resolution of 1024X768 should be another safe choice. You should also think about installing any driver software supplied with the monitor.

Dec 08, 2008 | PC Desktops

1 Answer

Connector config


http://www.ecsusa.com/ECSWebSite/Downloads/ProductsDetail_Download.aspx?detailid=46&DetailName=Manual&DetailDesc=P4VMM2(V1.1A)&CategoryID=1&MenuID=39&LanID=9
this is the link to your motherboard manual, its a .pdf file so you will use free adobe reader and traditional chinese fonts installed to view it correctly. Both of which you will be prompted to install when you try to download the manual unless they are already on your computer.
use the link at the bottom of the page to select the country , this will start the download.
All of the jumper and connection settings are in the manual.

Oct 19, 2008 | PC Desktops

5 Answers

Acer aspire 5715z/5315, turned laptop on took time to load up wasnt responding,restarded laptop then it wouldnt restart then i turned it of manually, turned it back on,screen acer back ground in the bottom...


Reboot your system-press and hold F8 until you get a list of options-select Safe Mode-enter.Your system will run in Safe Mode,giving you a dropdown list as it progresses-check where it stops.In this way you can establish wether you have a corrupted or incompatible driver and which {Graphic ie} stop the system.You will have to reload the OS to solve the problem.If you cannot even boot into Safe Mode,your drive very likely crashed.Happy landing.

Jul 22, 2008 | Acer PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...