Disconnect the lead from the flyback to the splitter. Place the flyback lead securely in a dry glass container and try to power up the set. If it doesnt shutdown the HV Block (splitter) is bad.
I have a 2002 RCA 61" Rear Projection Model P61960 Chassis PTK195Y06T I have bright red lines...
(More)
I have a 2002 RCA 61" Rear Projection Model P61960 Chassis PTK195Y06T I have bright red lines and light green lines rainbowed down from the borrom up to half the screen and rainbowed up from halfway to top. I have used the convergence and advanced convergence thru the remote but I don't see the red + moving during convergence. I can adjust the green to fit the tv and the blue + will move. So actually only the red covergence isn't working but I still also have the light green lines running across. I do not have the STK's on a big heatsink either as in other solutions. I replaced one resistor burned into on the convergence board with no results. Has anyone run across this problem? Please help. I don't have money for another tv.
We have a 61" RCA projection TV - model P61960 - all of a sudden the picture concaves in the...
(More)
We have a 61" RCA projection TV - model P61960 - all of a sudden the picture concaves in the middle and has the 3d effect. We have unplugged for 20 seconds to see if readjust - no luck. Can you help us?
I have an RCA 61" propjection tv Model P61960 YX1 that has gotton a red screen with light red...
(More)
I have an RCA 61" propjection tv Model P61960 YX1 that has gotton a red screen with light red lines with a bow running across the screen. I know the red crt is shorted but if I disconect the red crt, I still have the same red color with lines. I swapped the picture tube boards with no success. Now in the center of the screen there are three small dime size spots starting with yellow, red and green that appear and stay everytime I turn the tv on. Is it trash time? Thanks.