Question about Innovage 69420210126 Phone

1 Answer

I want to get rid of the batteries

Would like to use a small appliance ac adapter to run the innovage touch panel phone. It uses 3 AA batteries. Any ideas?

Posted by on

  • weeks404s Apr 18, 2008

    When I hit the hands-free button, I hear a hissing sound. When I try to punch in a number I hear real high pitch isolating whine.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

Werascal: It can be done. First look at the appliance body to see if there is a power jack. If not and your a tech type person you can do this: I assume the batteries are in series, if so their total sum equals 4.5 volts. You can direct wire your supply to the battery string ends, polarity observed correct with a supply voltage of 4.5 and bingo no need for batteries. Thanks for the question. Jerry

Posted on Feb 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to plug an AC adapter into the DC input (normally runs on 3 AA batteries. How much output should the adapter put out?


U don't plug an ac adapter into a dc input. U need a 5-6 volt DC adapter - make sure you observe correct polarity.

Jul 17, 2015 | Audio Players & Recorders

1 Answer

I have a Shift 3 lcd touch panel phone with 12 digit calculator.I cannot find the manual for this phone.I can receive calls but cannot call out.A manual would be helpful Thanks


  • Check your phone to make sure it is set up properly. Open the back of the phone by pressing your fingertip on the small lever that opens the battery area. The battery cover will come off in your hand. Insert three "AAA" batteries into the back of the phone so you can use the night light feature. Replace the battery cover by sliding it into the battery area and clicking it into place with your fingers. Connect the phone to the telephone phone jack by connecting one end of the wire to the phone and another end to the wall jack. Connect the handset to the phone by inserting the end of one end of the curly phone wire to the handset and the other end into the side of the phone. Listen to the dial tone by pressing the speakerphone or picking up the handset to make sure your Innovage LCD touch panel phone is connected.

  • 2

    Review calls you missed. Use the up and down arrows on the Innovage LCD touch panel phone to view the caller ID phone numbers.

  • 3

    Use the night light to view the Innovage LCD touch panel in the dark. Slide the switch on the front of the panel to turn the night light function on. Slide the switch to the off position to turn the night life off.

  • 4

    Adjust the volume on your speaker by selecting the speaker loudness that you want. Press the hands free button once and press the "Delete" button. Choose a loudness from one to four.

  • 5

    Press the hold button on the front of your Innovage LCD touch panel phone. This will activate the hold function when you are on a call and it will allow music to play while someone is on hold. The hold music is built in to the phone and will automatically play when you press hold.

  • 6

    Save a phone number as a VIP number on your Innovage LCD touch panel phone. Press set and save when an important number comes onto your caller identification. This makes it harder to delete the phone number by accident.



  • Read more: Innovage LCD Touch Panel Phone Instructions ' eHow.com http://www.ehow.com/how_7256783_innovage-touch-panel-phone-instructions.html#ixzz1eMIaaXLV

    Sep 23, 2011 | Innovage Speaker/Caller ID* LCD Touch...

    1 Answer

    Installed new batteries and the camera will not turn on. The camera has been sitting up for 6 mo. with no use. We used energizer lithium batteries.


    Try using recomended batteries:
    optional KODAK EASYSHARE Docks with 1 KODAK Ni-MH Rechargeable Digital Camera Battery KAA2HR; 2 Ni-MH batteries AA, 2 lithium batteries AA; 1 KODAK Lithium Digital Camera Battery CRV3; KODAK Ni-MH 2100mAh Battery Pack, KODAK Digital Camera Battery AA (ZR6); KODAK Alkaline Digital Camera Batteries AA; 3 volt DC input AC adapter

    You can even contact Kodak direct and they will send you a free CRV3 battery to test with.
    (http://graphics.kodak.com/docimaging/US/en/Landing_Page/ServiceSupportContacts/index.htm)

    Oct 26, 2009 | Kodak EasyShare C653 Digital Camera

    3 Answers

    Innovage lcd touch panel phone


    hi found a link to a user manual, its very hard to read it, very small writing and not to clear but got basics of phone working, still need to find a hard copy of user manual thx

    Jun 23, 2009 | Innovage Speaker/Caller ID* LCD Touch...

    1 Answer

    Power supply for Olympus fe-130


    (In addition to the batteries provided with the camera, the following types of battery can be used. Choose the power source best suited to the situation.
    AA alkaline batteries/ Oxyride batteries
    The number of pictures that you can take may vary considerably depending on the
    battery manufacturer and shooting conditions.
    AA NiMH batteries (rechargeable batteries)
    Olympus NiMH batteries are rechargeable and economical. For details, refer to the instruction manual for your charger.
    (Lithium battery packs (CR-V3) and AA manganese (zinc-carbon) batteries
    cannot be used.
    (Power consumption by the camera varies depending on which functions are used.
    (Power is consumed continuously during the conditions described below causing
    batteries to become exhausted quickly.
    • The zoom is used repeatedly.
    • The shutter button is pressed halfway repeatedly in shooting mode, activating the auto focus.
    • The monitor is left on for an extended period of time.
    • The camera is connected to a computer or printer.
    (The battery life varies greatly depending on the type of battery, manufacturer,
    shooting conditions, etc. Because of this, there may be cases where the camera
    turns itself off without displaying the battery level warning, or displays the battery
    level warning sooner than usual.

    The camera also has an optional accessory of an AC adapter that can be used as an alternative power source. It is model number E-7AU.
    An AC adapter is useful for time-consuming tasks such as image downloads to
    a computer or when running a slideshow for a long period of time.
    To use the AC adapter with this camera, the optional multi-adapter (CB-MA1) is
    necessary. Do not use any other AC adapter with this camera.
    Note
    • Do not remove or load the battery or connect or disconnect the AC adapter or
    multi-adapter while the camera is on or the camera is connected to the other
    equipment. Doing so could affect the camera’s internal settings or functions.
    • The AC adapter can be used within the range of AC 100 V to AC 240 V (50/60
    Hz). When using the shape of abroad, you may need a plug adapter to convert
    the plug to match the AC wall outlet. For details, ask at your local electrical shop
    or travel agent.
    • Do not use travel voltage converters as they could damage the AC adapter.

    Apr 16, 2009 | Olympus FE-130 Digital Camera

    1 Answer

    Light on telephone


    Once you put the 3 AA batteries in, just move the light bar to the right.

    Oct 21, 2008 | Innovage LCD Touch Panel Phone

    1 Answer

    Phone will not stay set once I perform all functions and it does not talk


    Determine whether it is possible to substitute an AC power adapter ["wally"] for the short-lived batteries. I believe the correct voltage is 4.5, replacing three 1.5 volt batteries.

    Nov 20, 2007 | Innovage 1604007 Corded Phone

    1 Answer

    How can I increase battery life?


    Transferring images from the camera to the computer requires a lot of battery power. It is recommended to use the AC adapter when transferring pictures to conserve battery life. If not using the AC adapter, make sure your batteries are fully charged and use the highest possible serial speed when connecting the camera to the computer. After transferring your images remember to shut off the camera, otherwise the camera will remain "awake" and will continue to wear down the batteries. The LCD display also uses much battery power and should be used sparingly when trying to conserve power usage. Battery life can be improved by using AA sized lithium batteries, rechargeable AA Ni-Cad batteries, or rechargeable AA Ni-MH batteries instead of AA sized alkaline batteries.

    Sep 13, 2005 | Epson PhotoPC 600 Digital Camera

    Not finding what you are looking for?
    Innovage 69420210126 Phone Logo

    Related Topics:

    105 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Innovage Lands Phones Experts

    spiritsoul

    Level 1 Expert

    14 Answers

    Mike Neath
    Mike Neath

    Level 3 Expert

    315 Answers

    Are you an Innovage Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...