Question about Sanyo DS31520 31" TV
How do you reset the DS31520 TV without the remote
I am relentless when it comes to problems like this. I had the same problem with my TV being stuck in video mode. I found out that there is a reset button......It's on the @*&#^&^ original remote!!!!! So I tried programming my Time Warner Scientific Atlanta AT8550 remote for the TV to see if the "video source" button would work. IT WORKED!!!! You have to use code 1062. Instructions are:
1. Turn the TV on.
2. Press and hold select and the TV keys until the lights blink twice.
3. Enter 1062. All mode keys blink twice to indicate that the code was accepted.
4. Point the remote at the TV and press power to test the TV.
5. You can then successfully use the "Video Source" button on the bottom left of the remote to change the video mode. VOILA!!!
If you don't have a Scientific Atlanta AT8550 remote, I'm sure you know someone that does. They're everywhere!
Posted on Mar 04, 2008
no you require the remote or a universal remote or sometimes a cable remote that has been programmed to work the volume on the tv set will have an input button .
Posted on Sep 29, 2009
Tips for a great answer:
Nov 29, 2015 | Sanyo DS31520 31" TV
May 29, 2010 | Sanyo DS31520 31" TV
Dec 03, 2009 | Sanyo DS31520 31" TV
Nov 16, 2009 | Sanyo DS31520 31" TV
Sep 29, 2009 | Sanyo DS31520 31" TV
725 people viewed this question
Usually answered in minutes!