Question about Canon PowerShot SD750 / IXUS 75 Digital Camera

3 Answers

Initial download how do you select the mode for the camera to download to the computer?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,944 Answers

Hi,

Just connect the USB cable to the camera and pc and turn the camera on. It should automatically enter USB mass storage mode.

Posted on Feb 10, 2008

  • Damen Wong
    Damen Wong Feb 10, 2008

    It should then appear in "my computer" as removable storage.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 871 Answers

Hi there

wow. you will need a software that detects pictures for that. initially, hp have there own software for their own camera. but since you are not Hp... you can use Picasa 2 for that.

picasa 2 is a programs specifically for pictures and video and it can even detect vids and pics form your camera and you can save it towards your computer.

you can download picasa 2 @ majorgeeks.com

hope this helps and thanks for using fixya.

^_^

Posted on Feb 10, 2008

  • earl norman llanera
    earl norman llanera Feb 10, 2008

    there is no mode for that, just turn on your camera and connect it to your computer using a cable that came with your camera. just plug the cam to your computer and the rest will be your computers job ^_^

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 407 Answers

Hi you turn on your camera & conect to computer usb port.
then first you setup your camera driver properly..... restart pc.
then auto conect your camera ..........
 best of luckkkk Austinrkdd....

Posted on Feb 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I downloaded photos on computer ,now I get card not initialized ? what do I do? Its a fujifilm camera..


Insert the memory card into the camera to format it if you are receiving error messages such as "Card Error" or "Card Not Initialized." Press the "Menu/OK" button then press the left/right directional button to select the "SET" option. Press the up or down direction button then press "Set Up" and press the "Menu/OK" to access the setup screen.
Press the down directional button to select "Option 1" and scroll down to the "Format" option. Press the right directional button to select the format option. Press the "Menu/OK" button to start the format process.
Move away from the target or brighten the lights if the auto focus does not work. Rotate the scenery mode dial at the top of the camera to the "Auto" mode. Press the "Flash" button to enable the flash mode to provide additional lighting if necessary.Manually set up the Fuji E500 camera with your computer if the computer does not automatically detect it. Connect the camera to the computer using the supplied USB cable and power on the camera. Click the "Start" button then click on the "Computer" option and select the FinePix Icon. Choose next on the download wizard to start the download process.


  • 2 Press the down directional button to select "Option 1" and scroll down to the "Format" option. Press the right directional button to select the format option. Press the "Menu/OK" button to start the format process.
  • 3 Move away from the target or brighten the lights if the auto focus does not work. Rotate the scenery mode dial at the top of the camera to the "Auto" mode. Press the "Flash" button to enable the flash mode to provide additional lighting if necessary.
  • 4 Manually set up the Fuji E500 camera with your computer if the computer does not automatically detect it. Connect the camera to the computer using the supplied USB cable and power on the camera. Click the "Start" button then click on the "Computer" option and select the FinePix Icon. Choose next on the download wizard to start the download process.

  • Read more: How to Troubleshoot a Fuji E500 Digital Camera ' eHow.com http://www.ehow.com/how_7636592_troubleshoot-fuji-e500-digital-camera.html#ixzz1OOyWsAIU

  • 2 Press the down directional button to select "Option 1" and scroll down to the "Format" option. Press the right directional button to select the format option. Press the "Menu/OK" button to start the format process.
  • 3 Move away from the target or brighten the lights if the auto focus does not work. Rotate the scenery mode dial at the top of the camera to the "Auto" mode. Press the "Flash" button to enable the flash mode to provide additional lighting if necessary.
  • 4 Manually set up the Fuji E500 camera with your computer if the computer does not automatically detect it. Connect the camera to the computer using the supplied USB cable and power on the camera. Click the "Start" button then click on the "Computer" option and select the FinePix Icon. Choose next on the download wizard to start the download process.

  • Read more: How to Troubleshoot a Fuji E500 Digital Camera ' eHow.com http://www.ehow.com/how_7636592_troubleshoot-fuji-e500-digital-camera.html#ixzz1OOyWsAIU

    May 31, 2011 | PNY Optima Pro 2GB Secure Digital Memory...

    1 Answer

    The flash wont work on the camera...still


    1. Even if the flash is set to always ON, the flash will still not work in the following circumstances:
    * When shooting MPEG movies. * When shooting in the Twilight or Handheld Twilight mode. * If shooting with the Burst or Multi Burst mode. * Shooting with Sweep Panorama. * Shooting with the Fireworks or High Sensitivity mode. * If an external flash is connected.
    2. You can also Initialize the Camera. Touch the Home option. Then, select the Main Settings and then, select the Main Setting2 option. Then, select the Initialize option to OK.
    3. You can also try to select the Flash Forced option to ON. The Flash Forced option is located under the Flash Settings.

    Jan 10, 2010 | Sony DSC-T70 Digital Camera

    1 Answer

    I have a sony cyber-shot dsc-w55 cammera, and my daughter turned the dial that changes the picture modes to many times and now it only records on every picture mode...any ideas how to reset it?


    Based on the information you provided, it seems that the Camera is in Burst or Multi-Burst mode.

    You may Initialize the Camera as follows:

    Initializing the Camera will reset the settings of the Camera to the factory settings including date and time. It will not delete any data saved in the Camera.

    Set the mode Dial on Camera. then, press the Menu button on the Camera. Then, select the SETUP menu and select the SETUP 1 option of the Camera. Then, select the Initialize option to OK.


    Good Luck!!!!!!!!!!!

    Nov 18, 2009 | Sony Cyber-shot DSC-W55 Digital Camera

    1 Answer

    Flash does not work


    Please note that:

    1. You can not use the Flash when the Camera is set to Burst or Multi Burst mode.

    2. You can not use the Flash when the ISO or Twilight mode is selected in the Scene Selection.

    3. You can not use the Flash when mode dial is set to Movie.

    Also try these steps and check:

    4. Ensure that the battery is fully charged and the flash is turned ON.

    Please set the Landscape mode or Snow mode or Beach mode in the Scene Selection and check if the flash is working.

    5. Try initializing the Camera and check if it works normally.

    NOTE: Initializing the Camera will reset the settings of the Camera to the factory settings including date and time. It will not delete any data saved in the Camera.

    6. Please press the Menu button on the Camera. Then, select the SETUP menu and select the SETUP 1 option of the Camera. Then, select the Initialize option to OK.

    7. Try to power reset the Camera and check if it helps to resolve the issue. I suggest that you reset the Camera by removing the battery from the Camera and inserting it after 1 minute.

    8. If the issue still persists then the Camera requires service.


    Good Luck!!!!!!!

    Oct 26, 2009 | Sony Cyber-shot DSC-S730 Digital Camera

    1 Answer

    Flash wont work, settings are on for flash, and the multiburst is switched off.


    Please note that:

    1. You can not use the Flash when the Camera is set to Burst or Multi Burst mode.

    2. You can not use the Flash when the ISO or Twilight mode is selected in the Scene Selection.

    3. You can not use the Flash when mode dial is set to Movie.

    4. Ensure that the battery is fully charged and the flash is turned ON.

    Please set the Landscape mode or Snow mode or Beach mode in the Scene Selection and check if the flash is working.

    5. Try initializing the Camera and check if it works normally.

    NOTE: Initializing the Camera will reset the settings of the Camera to the factory settings including date and time. It will not delete any data saved in the Camera.

    6. Please press the Menu button on the Camera. Then, select the SETUP menu and select the SETUP 1 option of the Camera. Then, select the Initialize option to OK.

    7. Try to power reset the Camera and check if it helps to resolve the issue. I suggest that you reset the Camera by removing the battery from the Camera and inserting it after 1 minute.

    8. If the issue still persists then the Camera requires service.


    Good Luck!!!!!!!

    Oct 09, 2009 | Sony Cyber-shot DSC-S700 Digital Camera

    1 Answer

    Flash is not working


    1. You can not use the Flash when the Camera is set to Burst or Multi Burst mode.

    2. You can not use the Flash when the ISO or Twilight mode is selected in the Scene Selection.

    3. You can not use the Flash when mode dial is set to Movie.

    Please set the Landscpe mode or Snow mode or Beach mode in the Scene Selection and check if the flash is working.

    4. Try initializing the Camera and check if it works normally.

    NOTE: Initializing the Camera will reset the settings of the Camera to the factory settings including date and time. It will not delete any data saved in the Camera.

    5. Please touch the HOME and select the SETTINGS menu in the Camera. Now, please select the MAIN settings menu. Please select the INITIALIZE option under the MAIN Settings 1 menu.

    6. Try to power reset the Camera and check if it helps to resolve the issue. I suggest that you reset the Camera by removing the battery from the Camera and inserting it after 1 minute.

    7. If the issue still persists then the Camera requires service.



    Good Luck!!!!!!!


    Oct 08, 2009 | Sony Cyber-shot DSC-T300 Digital Camera

    1 Answer

    DSC-W170 Focus does not work when in zoom mode at all?


    The Focus may not work normally if:

    * Twilight mode or Landscape mode or Fireworks mode is selected in the screne Selection when shooting still images.
    * The Focus preset function is selected. Select the auto Focus mode.

    Try Initializing the Camera as follows (Initializing the Camera will reset the settings of the Camera to the factory settings including date and time. It will not delete any data saved in the Camera):

    Press the Home button on the Camera. Then, select the SETTINGS -> MAIN SETTINGS -> MAIN SETTINGS 1 -> INITIALIZE -> OK.

    If issue persists try Power reset the Camera by removing the battery from the Camera and inserting it after 1 minute.

    If the issue still persists then Service may requires to resolve it.

    Aug 29, 2009 | Sony Cyber-shot DSC-W170 Digital Camera

    1 Answer

    Record Mode - MultiBurst


    Just perform Initialize action in camera menu, camera will go to default settings and no more multi burst.

    Aug 23, 2008 | Sony Cyber-shot DSC-T9 Digital Camera

    1 Answer

    MODE SELECTION PROBLEM


    Try menu-> setup->setup1, initialize, ok- this resets calendar and time as well. It brought mine back to correct mode selection.  Also make sure your battery is fully charged.

    Jul 21, 2008 | Sony Cyber-shot DSC-W100 Digital Camera

    1 Answer

    Upload fotos


    Here's how...
    • Starting PC mode
    If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode".
    In this mode, you can download stored images to your PC through the USB cable.
    The LCD monitor on the camera is always turned off in PC mode.
    • Connecting the camera to a PC
    1. In any mode, except Voice Recording mode, press the Menu button.
    2. Press the LEFT/ RIGHT button and select the 'SETUP' menu tab.
    3. Select the 'USB' menu by pressing the UP/DOWN button and press the RIGHT button.
    4. Use the UP and DOWN buttons to select 'Computer', and then press the OK button.
    5. Press the menu button twice and the menu will disappear.
    6. Connect the PC to the camera with the USB cable.
    • Downloading stored images
    You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them.
    1. Connect the camera to your PC with the USB cable.
    2. On your computer's desktop display, select 'My Computer' and double click 'Removable Disk' - 'DCIM' - '100SSCAM'.
    3. Select an image and press the right mouse button.
    4. A pop-up menu will open.
    Click the 'Cut' or 'Copy' menu.
    - 'Cut' : cuts (i.e. moves) a selected file.
    - 'Copy' : copies files.
    5. Click a folder where you want to store the file on your PC.

    Don't forget to rate this solution once you've tried it !

    Good Luck.

    May 20, 2008 | Samsung NV3 Digital Camera

    Not finding what you are looking for?
    Canon PowerShot SD750 / IXUS 75 Digital Camera Logo

    Related Topics:

    92 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Canon Cameras Experts

    kakima

    Level 3 Expert

    101551 Answers

    TC CAMERA REPAIR.Com...

    Level 2 Expert

    165 Answers

    old marine
    old marine

    Level 3 Expert

    1709 Answers

    Are you a Canon Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...