- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
dude call a copier tech... and buy a powerline filter... this way the spikes wont affect your copier... the error is easy to fix... but you might have some damage under the hood... call a copier tech today...
C2557= ATDC sensor failure.
Did you run the machine out of toner? Or if you or a service tech recently replaced the developer then you need to perform the F8 adjustment in the service mode. Either way you will need a service technician.
COBAo = Elevate mechanism malfunction.
The exit tray home position sensor is not blocked even after the lapse of a given period of time after the tray has started moving up.
An encoder clock input is not detected within a given period of time during operation of the tray.Check the sensors,motors and his connectors.
How to reset:
1. Press the trouble reset switch on the Tech.Rep.Setting Switches Board to reset the following malfunctions:scanner,fusing,exposure related malfunctions and C3FF.
2. For any other malfunctions open and close the front door or turn OFF and ON the power switch.
This is the only reference I could find on error 41:
How can I clear the message Machine Error 41 from the display? (ME41)
Machine Error 41 indicates a mechanical malfunction of the Brother machine. Unplug the unit from the power source and then plug it back in.
If the error message continues to be displayed on the LCD, please call Brother Customer Service at 1-800-284-4329 for assistance. The Customer Service center is open Monday through Friday, from 9:00AM to 7:00PM, excluding holidays
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe
Check the filter operation and harness and, if they are okay, change PWB-IB or PWB-IC meaning check the connections one board B is located under the scanner C is located behind the scanner, get tech to this is is going to get complex open close front door to reset.
The C0048 error code not exist.Malfunction resetting procedure: Turn OFF,then ON the power switch or open and close the side cover for all malfunctions except C05XX codes. Use Trouble reset of the Initial screen to reset all malfunctions. To right side the touch panel(screen display)near display contrast button exist a little hole (reset switch).Insert a hairpin to touch the switch. Enter "3" from the 10-key pad when " * " appears at the center on the left side of the screen while the start up screen being displayed.Touch TROUBLE RESET,and EXIT to go back to the basic screen.